From: Christophe Roullier <christophe.roullier@foss.st.com>
To: "David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Richard Cochran <richardcochran@gmail.com>,
Jose Abreu <joabreu@synopsys.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Christophe Roullier <christophe.roullier@foss.st.com>,
Marek Vasut <marex@denx.de>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH 1/3] ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
Date: Mon, 10 Jun 2024 10:03:07 +0200 [thread overview]
Message-ID: <20240610080309.290444-2-christophe.roullier@foss.st.com> (raw)
In-Reply-To: <20240610080309.290444-1-christophe.roullier@foss.st.com>
Both instances ethernet based on GMAC SNPS IP on stm32mp13.
GMAC IP version is SNPS 4.20.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
arch/arm/boot/dts/st/stm32mp131.dtsi | 38 ++++++++++++++++++++++++++++
arch/arm/boot/dts/st/stm32mp133.dtsi | 31 +++++++++++++++++++++++
2 files changed, 69 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index 6704ceef284d3..e1a764d269d27 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -979,6 +979,12 @@ ts_cal1: calib@5c {
ts_cal2: calib@5e {
reg = <0x5e 0x2>;
};
+ ethernet_mac1_address: mac1@e4 {
+ reg = <0xe4 0x6>;
+ };
+ ethernet_mac2_address: mac2@ea {
+ reg = <0xea 0x6>;
+ };
};
etzpc: bus@5c007000 {
@@ -1505,6 +1511,38 @@ sdmmc2: mmc@58007000 {
status = "disabled";
};
+ ethernet1: ethernet@5800a000 {
+ compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800a000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 68 1>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "ethstp",
+ "eth-ck";
+ clocks = <&rcc ETH1MAC>,
+ <&rcc ETH1TX>,
+ <&rcc ETH1RX>,
+ <&rcc ETH1STP>,
+ <&rcc ETH1CK_K>;
+ st,syscon = <&syscfg 0x4 0xff0000>;
+ snps,mixed-burst;
+ snps,pbl = <2>;
+ snps,axi-config = <&stmmac_axi_config_1>;
+ snps,tso;
+ access-controllers = <&etzpc 48>;
+ status = "disabled";
+
+ stmmac_axi_config_1: stmmac-axi-config {
+ snps,blen = <0 0 0 0 16 8 4>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,wr_osr_lmt = <0x7>;
+ };
+ };
+
usbphyc: usbphyc@5a006000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
index 3e394c8e58b92..73e470019ce42 100644
--- a/arch/arm/boot/dts/st/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -68,4 +68,35 @@ channel@18 {
};
};
};
+
+ ethernet2: ethernet@5800e000 {
+ compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800e000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts-extended = <&intc GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "ethstp",
+ "eth-ck";
+ clocks = <&rcc ETH2MAC>,
+ <&rcc ETH2TX>,
+ <&rcc ETH2RX>,
+ <&rcc ETH2STP>,
+ <&rcc ETH2CK_K>;
+ st,syscon = <&syscfg 0x4 0xff000000>;
+ snps,mixed-burst;
+ snps,pbl = <2>;
+ snps,axi-config = <&stmmac_axi_config_2>;
+ snps,tso;
+ access-controllers = <&etzpc 49>;
+ status = "disabled";
+
+ stmmac_axi_config_2: stmmac-axi-config {
+ snps,blen = <0 0 0 0 16 8 4>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,wr_osr_lmt = <0x7>;
+ };
+ };
};
--
2.25.1
next prev parent reply other threads:[~2024-06-10 8:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-10 8:03 [PATCH 0/3] Series DTs to deliver Ethernet for STM32MP13 Christophe Roullier
2024-06-10 8:03 ` Christophe Roullier [this message]
2024-06-10 8:03 ` [PATCH 2/3] ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board Christophe Roullier
2024-06-10 10:41 ` Marek Vasut
2024-06-10 8:03 ` [PATCH 3/3] ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board Christophe Roullier
2024-06-10 10:42 ` Marek Vasut
2024-06-27 12:19 ` [PATCH 0/3] Series DTs to deliver Ethernet for STM32MP13 Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240610080309.290444-2-christophe.roullier@foss.st.com \
--to=christophe.roullier@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=joabreu@synopsys.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=marex@denx.de \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).