Re: [PATCH v6 5/7] iommu/riscv: Device directory management.

[Jason Gunthorpe <jgg@ziepe.ca>]

On Mon, Jun 10, 2024 at 11:48:23AM -0700, Tomasz Jeznach wrote:
> > Right, this is why I asked about negative caching.
> >
> > The VMMs are a prime example of negative caching, in something like
> > the SMMU implementation the VMM will cache the V=0 STE until they see
> > an invalidation.
> >
> > Driving the VMM shadowing/caching entirely off of the standard
> > invalidation mechanism is so much better than any other option.
> >
> > IMHO you should have the RISCV spec revised to allow negative caching
> > in any invalidated data structure to permit the typical VMM design
> > driven off of shadowing triggered by invalidation commands.
> >
> > Once the spec permits negative caching then the software would have to
> > invalidate after going V=0 -> V=1.
> >
> > Jason
> 
> Allowing negative cacheing by the spec (e.g. for VMM use cases) and
> documenting required invalidation sequences would definitely help
> here. 

Yes, you probably should really do that.

> I'm hesitating adding IODIR.INVAL that is not required by the
> spec [1],

If you expect to rapidly revise the spec then you should add it right
now so that all SW implementations that exist are
conforming. Otherwise you'll have compatability problems when you come
to implement nesting.

Obviously the VMM can't rely on a negative caching technique unless
the spec says it can.

> but this is something that can be controlled by a
> capabilities/feature bit once added to the specification or based on
> VID:DID of the emulated Risc-V IOMMU.

I'm not sure it really can. Once you start shipping SW people will run
it in a VM and the VMM will have to forever work without negative
caching.

My strong advice is to not expect the VMM trap random pages in guest
memory, that is a huge mess to implement and will delay your VMM side.

> Another option to consider for VMM is to utilize the WARL property of
> DDTP, and provide fixed location of the single level DDTP, pointing to
> MMIO region, where DDTE updates will result in vmm exit / fault
> handler. This will likely not be as efficient as IODIR.INVAL issued
> for any DDTE updates.

I don't know what all those things mean, but if you mean to have the
VMM supply faulting MMIO space that the VM is forced to put the DDTE
table into, then that would be better. It is still quite abnormal from
the VMM side..

My strong advice is to fix this. It is trivial to add the negative
caching language to the spec and will cause insignificant extra work
in this driver.

The gains on at least the ease of VMM implementation and architectural
similarity to other arches are well worth the effort. Otherwise I fear
it will be a struggle to get nesting support completed :(

Jason