[PATCH RFC 1/3] ASoC: dt-bindings: amlogic,axg-sound-card: document clocks and clock-names

[Neil Armstrong <neil.armstrong@linaro.org>]

The sound card design is based on 3 reference PLL frequencies that
are the root of all clock rates calculations.

Today, those 3 frequencies are specified in DT via assigned-clocks,
because they correspond to the basic audio use-case.

It makes no sense to setup clock rates for a sound card without
referencing the clocks for the sound card, mainly because at
some point more complex audio use cases will be supported
and those root rates would need to change.

To solve this situation, let's legitimize the presence of assigned-clocks
in the sound card by documenting those clocks, as it describes a true
dependency of the sound card and paths the way of more complex
audio uses-cases involving those root frequencies.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../devicetree/bindings/sound/amlogic,axg-sound-card.yaml    | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
index 5db718e4d0e7..676ff2731b86 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
@@ -26,6 +26,18 @@ properties:
       A list off component DAPM widget. Each entry is a pair of strings,
       the first being the widget type, the second being the widget name
 
+  clocks:
+    maxItems: 3
+    description:
+      Base PLL clocks of audio susbsytem, used to configure base clock
+      frequencies for different audio use-cases.
+
+  clock-names:
+    items:
+      - const: mpll0
+      - const: mpll1
+      - const: mpll2
+
 patternProperties:
   "^dai-link-[0-9]+$":
     type: object

-- 
2.34.1