* [PATCH RFC 0/3] ASoC: dt-bindings: amlogic-sound-cards: document clocks and clock-names
@ 2024-06-14 16:24 Neil Armstrong
2024-06-14 16:24 ` [PATCH RFC 1/3] ASoC: dt-bindings: amlogic,axg-sound-card: " Neil Armstrong
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Neil Armstrong @ 2024-06-14 16:24 UTC (permalink / raw)
To: Jerome Brunet, Liam Girdwood, Mark Brown, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Kevin Hilman,
Martin Blumenstingl
Cc: alsa-devel, linux-sound, devicetree, linux-kernel,
linux-arm-kernel, linux-amlogic, Neil Armstrong
Following an off-list discution with Jerome about fixing the following
DTBs check errors:
sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
from schema $id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml#
sound: 'anyOf' conditional failed, one must be fixed:
'clocks' is a required property
'#clock-cells' is a required property
from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
It has been agreed documenting the clock and clock-names in the sound card
is a better solution than moveing them to a random clock controller
or consumer node which is not related to the actual meaning of those
root frequencies.
The patchset adds the clocks and clocks-names to the bindings and
finally adds the properties to the DT files.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Neil Armstrong (3):
ASoC: dt-bindings: amlogic,axg-sound-card: document clocks and clock-names
ASoC: dt-bindings: amlogic,gx-sound-card: document clocks and clock-names
arm64: dts: amlogic: add clock and clock-names to sound cards
.../devicetree/bindings/sound/amlogic,axg-sound-card.yaml | 12 ++++++++++++
.../devicetree/bindings/sound/amlogic,gx-sound-card.yaml | 12 ++++++++++++
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 4 ++++
.../arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts | 4 ++++
.../boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 4 ++++
.../boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts | 4 ++++
arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts | 4 ++++
50 files changed, 216 insertions(+)
---
base-commit: 2ceb903a0c515872bb0ca0156bc4e568651f1eb4
change-id: 20240614-topic-amlogic-upstream-bindings-fixes-audio-snd-card-2c642ccd2c6e
Best regards,
--
Neil Armstrong <neil.armstrong@linaro.org>
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH RFC 1/3] ASoC: dt-bindings: amlogic,axg-sound-card: document clocks and clock-names 2024-06-14 16:24 [PATCH RFC 0/3] ASoC: dt-bindings: amlogic-sound-cards: document clocks and clock-names Neil Armstrong @ 2024-06-14 16:24 ` Neil Armstrong 2024-06-14 17:05 ` Jerome Brunet 2024-06-14 16:24 ` [PATCH RFC 2/3] ASoC: dt-bindings: amlogic,gx-sound-card: " Neil Armstrong 2024-06-14 16:24 ` [PATCH RFC 3/3] arm64: dts: amlogic: add clock and clock-names to sound cards Neil Armstrong 2 siblings, 1 reply; 6+ messages in thread From: Neil Armstrong @ 2024-06-14 16:24 UTC (permalink / raw) To: Jerome Brunet, Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Kevin Hilman, Martin Blumenstingl Cc: alsa-devel, linux-sound, devicetree, linux-kernel, linux-arm-kernel, linux-amlogic, Neil Armstrong The sound card design is based on 3 reference PLL frequencies that are the root of all clock rates calculations. Today, those 3 frequencies are specified in DT via assigned-clocks, because they correspond to the basic audio use-case. It makes no sense to setup clock rates for a sound card without referencing the clocks for the sound card, mainly because at some point more complex audio use cases will be supported and those root rates would need to change. To solve this situation, let's legitimize the presence of assigned-clocks in the sound card by documenting those clocks, as it describes a true dependency of the sound card and paths the way of more complex audio uses-cases involving those root frequencies. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- .../devicetree/bindings/sound/amlogic,axg-sound-card.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml index 5db718e4d0e7..676ff2731b86 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml @@ -26,6 +26,18 @@ properties: A list off component DAPM widget. Each entry is a pair of strings, the first being the widget type, the second being the widget name + clocks: + maxItems: 3 + description: + Base PLL clocks of audio susbsytem, used to configure base clock + frequencies for different audio use-cases. + + clock-names: + items: + - const: mpll0 + - const: mpll1 + - const: mpll2 + patternProperties: "^dai-link-[0-9]+$": type: object -- 2.34.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH RFC 1/3] ASoC: dt-bindings: amlogic,axg-sound-card: document clocks and clock-names 2024-06-14 16:24 ` [PATCH RFC 1/3] ASoC: dt-bindings: amlogic,axg-sound-card: " Neil Armstrong @ 2024-06-14 17:05 ` Jerome Brunet 0 siblings, 0 replies; 6+ messages in thread From: Jerome Brunet @ 2024-06-14 17:05 UTC (permalink / raw) To: Neil Armstrong Cc: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Kevin Hilman, Martin Blumenstingl, alsa-devel, linux-sound, devicetree, linux-kernel, linux-arm-kernel, linux-amlogic On Fri 14 Jun 2024 at 18:24, Neil Armstrong <neil.armstrong@linaro.org> wrote: > The sound card design is based on 3 reference PLL frequencies that > are the root of all clock rates calculations. > > Today, those 3 frequencies are specified in DT via assigned-clocks, > because they correspond to the basic audio use-case. > > It makes no sense to setup clock rates for a sound card without > referencing the clocks for the sound card, mainly because at > some point more complex audio use cases will be supported > and those root rates would need to change. > > To solve this situation, let's legitimize the presence of assigned-clocks > in the sound card by documenting those clocks, as it describes a true > dependency of the sound card and paths the way of more complex > audio uses-cases involving those root frequencies. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > .../devicetree/bindings/sound/amlogic,axg-sound-card.yaml | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml > index 5db718e4d0e7..676ff2731b86 100644 > --- a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml > +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml > @@ -26,6 +26,18 @@ properties: > A list off component DAPM widget. Each entry is a pair of strings, > the first being the widget type, the second being the widget name > > + clocks: > + maxItems: 3 > + description: > + Base PLL clocks of audio susbsytem, used to configure base clock > + frequencies for different audio use-cases. > + > + clock-names: > + items: > + - const: mpll0 > + - const: mpll1 > + - const: mpll2 > + Thanks a lot for this series. This is going in the right direction but requiring 3 clocks or naming them (whatever the name) is not appropriate. The purpose is for the sound card to get the necessary base rates it needs for its operation. So far it has always been 3 clocks because of the 3 usual family rates and enough PLLs are available. But this is not required. There could be none (very unlikely but possible if fixed clocks are or with slave setups), one (probable on a1 from what I can tell), or even more than 3, if one needs supports for unusual rates. Also the PLLs are not necessarily the mplls, HiFi PLL is used on some device. It could even be the GP0 or external slave clocks which is why putting a limit the number of clocks would be arbitrary. I think the following would better describe the HW: clocks: true assigned-clocks: true assigned-clock-parents: true assigned-clock-rates: true Maybe just 'clocks: true' is enough since the presence of would allow 'assigned-clocks' For sure, clock-names is not useful, for axg of gx compatible card at least. All inputs are equal to the card, so index are enough if the card needed to change rates are runtime (but it is very unlikely to happen, the whole axg or gx system are meant to operate with fixed PLLs so it would not be compatible) > patternProperties: > "^dai-link-[0-9]+$": > type: object PS: I just noticed that my reply to your previous series was private. It was not meant to be. Sorry about that. -- Jerome ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH RFC 2/3] ASoC: dt-bindings: amlogic,gx-sound-card: document clocks and clock-names 2024-06-14 16:24 [PATCH RFC 0/3] ASoC: dt-bindings: amlogic-sound-cards: document clocks and clock-names Neil Armstrong 2024-06-14 16:24 ` [PATCH RFC 1/3] ASoC: dt-bindings: amlogic,axg-sound-card: " Neil Armstrong @ 2024-06-14 16:24 ` Neil Armstrong 2024-06-14 16:24 ` [PATCH RFC 3/3] arm64: dts: amlogic: add clock and clock-names to sound cards Neil Armstrong 2 siblings, 0 replies; 6+ messages in thread From: Neil Armstrong @ 2024-06-14 16:24 UTC (permalink / raw) To: Jerome Brunet, Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Kevin Hilman, Martin Blumenstingl Cc: alsa-devel, linux-sound, devicetree, linux-kernel, linux-arm-kernel, linux-amlogic, Neil Armstrong The sound card design is based on 3 reference PLL frequencies that are the root of all clock rates calculations. Today, those 3 frequencies are specified in DT via assigned-clocks, because they correspond to the basic audio use-case. It makes no sense to setup clock rates for a sound card without referencing the clocks for the sound card, mainly because at some point more complex audio use cases will be supported and those root rates would need to change. To solve this situation, let's legitimize the presence of assigned-clocks in the sound card by documenting those clocks, as it describes a true dependency of the sound card and paths the way of more complex audio uses-cases involving those root frequencies. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- .../devicetree/bindings/sound/amlogic,gx-sound-card.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml index 0ecdaf7190e9..d29dbca9ccc9 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml @@ -27,6 +27,18 @@ properties: A list off component DAPM widget. Each entry is a pair of strings, the first being the widget type, the second being the widget name + clocks: + maxItems: 3 + description: + Base PLL clocks of audio susbsytem, used to configure base clock + frequencies for different audio use-cases. + + clock-names: + items: + - const: mpll0 + - const: mpll1 + - const: mpll2 + patternProperties: "^dai-link-[0-9]+$": type: object -- 2.34.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH RFC 3/3] arm64: dts: amlogic: add clock and clock-names to sound cards 2024-06-14 16:24 [PATCH RFC 0/3] ASoC: dt-bindings: amlogic-sound-cards: document clocks and clock-names Neil Armstrong 2024-06-14 16:24 ` [PATCH RFC 1/3] ASoC: dt-bindings: amlogic,axg-sound-card: " Neil Armstrong 2024-06-14 16:24 ` [PATCH RFC 2/3] ASoC: dt-bindings: amlogic,gx-sound-card: " Neil Armstrong @ 2024-06-14 16:24 ` Neil Armstrong 2024-06-14 17:10 ` Jerome Brunet 2 siblings, 1 reply; 6+ messages in thread From: Neil Armstrong @ 2024-06-14 16:24 UTC (permalink / raw) To: Jerome Brunet, Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Kevin Hilman, Martin Blumenstingl Cc: alsa-devel, linux-sound, devicetree, linux-kernel, linux-arm-kernel, linux-amlogic, Neil Armstrong Add the missing clocks and clock-names in the sound card nodes according the the AXG and GX sound card bindings changes. It solved the following errors: sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected) from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml# sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected) from schema $id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml# sound: 'anyOf' conditional failed, one must be fixed: 'clocks' is a required property '#clock-cells' is a required property from schema $id: http://devicetree.org/schemas/clock/clock.yaml# Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts | 4 ++++ 48 files changed, 192 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 7ed526f45175..2228ed88b977 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -268,6 +268,10 @@ sound { "Speaker1 Right", "SPK1 OUT_D", "Linein AINL", "Linein", "Linein AINR", "Linein"; + clocks = <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_HIFI_PLL>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts index af211d8f3952..0bd298920191 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts @@ -176,6 +176,10 @@ sound { "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts index 15b9bc280706..b44c0802d47c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts @@ -138,6 +138,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index 61cb8135a392..3ddd0e2c4710 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -201,6 +201,10 @@ sound { "TODDR_B IN 1", "TDMIN_B OUT", "TODDR_C IN 1", "TDMIN_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index 0e239939ade6..42ac5dcdb19d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -238,6 +238,10 @@ sound { "Lineout", "10U2 OUTL", "Lineout", "10U2 OUTR"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 05c7a1e3f1b7..0ee32d7bceae 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -158,6 +158,10 @@ sound { "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts index 13d478f9c891..cdc9d387d9be 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts @@ -70,6 +70,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts index 003efed529ba..0af7ba8ec896 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts @@ -79,6 +79,10 @@ sound { "LINPUT1", "Mic Jack", "Mic Jack", "MICB"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi index 6a346cb86a53..5136b062e19a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi @@ -194,6 +194,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts index bb73e10b5e74..8356b881fb31 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts @@ -48,6 +48,10 @@ sound { "TDMOUT_A IN 2", "FRDDR_C OUT 1", "TDM_A Playback", "TDMOUT_A OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts index 6eeedd54ab91..cc1156a225c1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts @@ -49,6 +49,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts index 0da386cabe1a..4d1ef4d98391 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts @@ -37,6 +37,10 @@ sound { "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts index eed2a23047ca..c58e551b0e95 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts @@ -234,6 +234,10 @@ sound { "Internal Speakers", "Speaker Amplifier OUTL", "Internal Speakers", "Speaker Amplifier OUTR"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index d80dd9a3da31..1f4674bbebda 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -71,6 +71,10 @@ sound { "Lineout", "U19 OUTL", "Lineout", "U19 OUTR"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts index e26f3e3258e1..058453f547b4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts @@ -39,6 +39,10 @@ sound { "TODDR_B IN 6", "TDMIN_LB OUT", "TODDR_C IN 6", "TDMIN_LB OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts index 8445701100d0..bf434fcee31d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts @@ -176,6 +176,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts index 6396f190d703..0ad35693ccb3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts @@ -32,6 +32,10 @@ sound { "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi index efd662a452e8..db76787386ac 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi @@ -194,6 +194,10 @@ sound { "AU2 INR", "ACODEC LORN", "7J4-14 LEFT", "AU2 OUTL", "7J4-11 RIGHT", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 08d6b69ba469..4e2cbd9d60f2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -129,6 +129,10 @@ sound { "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts index f28452b9f00f..01c47d1545b8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts @@ -45,6 +45,10 @@ button-reset { sound { compatible = "amlogic,gx-sound-card"; model = "KII-PRO"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 1fd2e56e6b08..a7a2767a42a1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -135,6 +135,10 @@ hdmi_connector_in: endpoint { sound { compatible = "amlogic,gx-sound-card"; model = "NANOPI-K2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index cca129ce2c58..8c01a43e4e7a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -142,6 +142,10 @@ hdmi_connector_in: endpoint { sound { compatible = "amlogic,gx-sound-card"; model = "NEXBOX-A95X"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index c37cc6b036cd..6a794f72544d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -177,6 +177,10 @@ hdmi_connector_in: endpoint { sound { compatible = "amlogic,gx-sound-card"; model = "ODROID-C2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 7f94716876d3..3ba3681fe3ba 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -68,6 +68,10 @@ button-menu { sound { compatible = "amlogic,gx-sound-card"; model = "P200"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts index 6f81eed83bec..32e1c272052e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts @@ -17,6 +17,10 @@ / { sound { compatible = "amlogic,gx-sound-card"; model = "P201"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 255e93a0b36d..cbb847b8d5fe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -108,6 +108,10 @@ sdio_pwrseq: sdio-pwrseq { sound { compatible = "amlogic,gx-sound-card"; model = "VEGA-S95"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index af9ea32a2876..b5b0ced8ecff 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -16,6 +16,10 @@ / { sound { compatible = "amlogic,gx-sound-card"; model = "WETEK-HUB"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index 376760d86766..29749b053e1e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -48,6 +48,10 @@ button { sound { compatible = "amlogic,gx-sound-card"; model = "WETEK-PLAY2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts index 90ef9c17d80b..6aef181ca2ce 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -123,6 +123,10 @@ sound { "Speaker", "9J5-2 RIGHT"; audio-routing = "9J5-3 LEFT", "ACODEC LOLN", "9J5-2 RIGHT", "ACODEC LORN"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts index 08a4718219b1..fdc387c9b202 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -128,6 +128,10 @@ sound { "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index fea65f20523a..065a7fc9d2fc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -67,6 +67,10 @@ hdmi_connector_in: endpoint { sound { compatible = "amlogic,gx-sound-card"; model = "KHADAS-VIM"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts index 63b20860067c..2fe5c6686657 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts @@ -160,6 +160,10 @@ vcc_1v8: regulator-vcc-1v8 { sound { compatible = "amlogic,gx-sound-card"; model = "LIBRETECH-CC-V2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 8b26c9661be1..4b40794721fd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -142,6 +142,10 @@ sound { "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts index 9b4ea6a49398..98c6251142c4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts @@ -50,6 +50,10 @@ sound { "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 07e7c3bedea0..d97fca396e0e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -150,6 +150,10 @@ wifi32k: wifi32k { sound { compatible = "amlogic,gx-sound-card"; model = "KHADAS-VIM2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index ad2dd4ad0a31..71ee228781fe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -86,6 +86,10 @@ hdmi_connector_in: endpoint { sound { compatible = "amlogic,gx-sound-card"; model = "NEXBOX-A1"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index d05dde8da5c5..81387968f51d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -101,6 +101,10 @@ sdio_pwrseq: sdio-pwrseq { sound { compatible = "amlogic,gx-sound-card"; model = "RBOX-PRO"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index e78cc9b577a0..bd4ffc07e456 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -182,6 +182,10 @@ sound { "TODDR_B IN 0", "TDMIN_A OUT", "TODDR_C IN 0", "TDMIN_A OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi index 082b72703cdf..746ce70b545b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi @@ -200,6 +200,10 @@ sound { <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, <&dioo2133>; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts index 9b2eb6e42651..4cca62ddd04a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts @@ -22,6 +22,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts index 6e34fd80ed71..4a2aef4948ff 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts @@ -22,6 +22,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts index 586034316ec3..3203280bffe7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts @@ -22,6 +22,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts index f045bf851638..6db7c5ccdbbc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts @@ -57,6 +57,10 @@ sound { "Lineout", "ACODEC LOLP", "Lineout", "ACODEC LORP"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts index e6e9410d40cb..918ace039da6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts @@ -22,6 +22,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi index 951eb8e3f0c0..44d2346482a5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -174,6 +174,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 3581e14cbf18..19b712e45066 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -239,6 +239,10 @@ sound { "TODDR_B IN 1", "TDMIN_B OUT", "TODDR_C IN 1", "TDMIN_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts index fc9b961133cd..c913af910208 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts @@ -22,6 +22,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts index 9ea969255b4f..49978855c2d9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts @@ -22,6 +22,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + clock-names = "mpll0", "mpll1", "mpll2"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; -- 2.34.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH RFC 3/3] arm64: dts: amlogic: add clock and clock-names to sound cards 2024-06-14 16:24 ` [PATCH RFC 3/3] arm64: dts: amlogic: add clock and clock-names to sound cards Neil Armstrong @ 2024-06-14 17:10 ` Jerome Brunet 0 siblings, 0 replies; 6+ messages in thread From: Jerome Brunet @ 2024-06-14 17:10 UTC (permalink / raw) To: Neil Armstrong Cc: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Kevin Hilman, Martin Blumenstingl, alsa-devel, linux-sound, devicetree, linux-kernel, linux-arm-kernel, linux-amlogic On Fri 14 Jun 2024 at 18:24, Neil Armstrong <neil.armstrong@linaro.org> wrote: > Add the missing clocks and clock-names in the sound card nodes > according the the AXG and GX sound card bindings changes. > > It solved the following errors: > sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected) > from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml# > sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected) > from schema $id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml# > sound: 'anyOf' conditional failed, one must be fixed: > 'clocks' is a required property > '#clock-cells' is a required property > from schema $id: http://devicetree.org/schemas/clock/clock.yaml# > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts | 4 ++++ > 48 files changed, 192 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts > index 7ed526f45175..2228ed88b977 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts > @@ -268,6 +268,10 @@ sound { > "Speaker1 Right", "SPK1 OUT_D", > "Linein AINL", "Linein", > "Linein AINR", "Linein"; > + clocks = <&clkc CLKID_HIFI_PLL>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_HIFI_PLL>, Here the HiFi PLL shows the naming is kind of odd. As explained in the bindings, I don't think is useful. For the record, on AXG the HiFi PLL works well and should be used. On G12/SM1 there is slight instabily with the HiFi - probably similar to the one affecting the SYS PLL / DVFS. It can be used with a small hack but it is safer to use the MPLL2 instead. > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts > index af211d8f3952..0bd298920191 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts > @@ -176,6 +176,10 @@ sound { > "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", > "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts > index 15b9bc280706..b44c0802d47c 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts > @@ -138,6 +138,10 @@ sound { > "TDMOUT_B IN 2", "FRDDR_C OUT 1", > "TDM_B Playback", "TDMOUT_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts > index 61cb8135a392..3ddd0e2c4710 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts > @@ -201,6 +201,10 @@ sound { > "TODDR_B IN 1", "TDMIN_B OUT", > "TODDR_C IN 1", "TDMIN_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts > index 0e239939ade6..42ac5dcdb19d 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts > @@ -238,6 +238,10 @@ sound { > "Lineout", "10U2 OUTL", > "Lineout", "10U2 OUTR"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts > index 05c7a1e3f1b7..0ee32d7bceae 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts > @@ -158,6 +158,10 @@ sound { > "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", > "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts > index 13d478f9c891..cdc9d387d9be 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts > @@ -70,6 +70,10 @@ sound { > "TDMOUT_B IN 2", "FRDDR_C OUT 1", > "TDM_B Playback", "TDMOUT_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts > index 003efed529ba..0af7ba8ec896 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts > @@ -79,6 +79,10 @@ sound { > "LINPUT1", "Mic Jack", > "Mic Jack", "MICB"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi > index 6a346cb86a53..5136b062e19a 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi > @@ -194,6 +194,10 @@ sound { > "TDMOUT_B IN 2", "FRDDR_C OUT 1", > "TDM_B Playback", "TDMOUT_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts > index bb73e10b5e74..8356b881fb31 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts > @@ -48,6 +48,10 @@ sound { > "TDMOUT_A IN 2", "FRDDR_C OUT 1", > "TDM_A Playback", "TDMOUT_A OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts > index 6eeedd54ab91..cc1156a225c1 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts > @@ -49,6 +49,10 @@ sound { > "TDMOUT_B IN 2", "FRDDR_C OUT 1", > "TDM_B Playback", "TDMOUT_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts > index 0da386cabe1a..4d1ef4d98391 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts > @@ -37,6 +37,10 @@ sound { > "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", > "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts > index eed2a23047ca..c58e551b0e95 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts > @@ -234,6 +234,10 @@ sound { > "Internal Speakers", "Speaker Amplifier OUTL", > "Internal Speakers", "Speaker Amplifier OUTR"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > index d80dd9a3da31..1f4674bbebda 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > @@ -71,6 +71,10 @@ sound { > "Lineout", "U19 OUTL", > "Lineout", "U19 OUTR"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts > index e26f3e3258e1..058453f547b4 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts > @@ -39,6 +39,10 @@ sound { > "TODDR_B IN 6", "TDMIN_LB OUT", > "TODDR_C IN 6", "TDMIN_LB OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts > index 8445701100d0..bf434fcee31d 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts > @@ -176,6 +176,10 @@ sound { > "TDMOUT_B IN 2", "FRDDR_C OUT 1", > "TDM_B Playback", "TDMOUT_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts > index 6396f190d703..0ad35693ccb3 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts > @@ -32,6 +32,10 @@ sound { > "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", > "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi > index efd662a452e8..db76787386ac 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi > @@ -194,6 +194,10 @@ sound { > "AU2 INR", "ACODEC LORN", > "7J4-14 LEFT", "AU2 OUTL", > "7J4-11 RIGHT", "AU2 OUTR"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi > index 08d6b69ba469..4e2cbd9d60f2 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi > @@ -129,6 +129,10 @@ sound { > "AU2 INR", "ACODEC LORN", > "Lineout", "AU2 OUTL", > "Lineout", "AU2 OUTR"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts > index f28452b9f00f..01c47d1545b8 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts > @@ -45,6 +45,10 @@ button-reset { > sound { > compatible = "amlogic,gx-sound-card"; > model = "KII-PRO"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts > index 1fd2e56e6b08..a7a2767a42a1 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts > @@ -135,6 +135,10 @@ hdmi_connector_in: endpoint { > sound { > compatible = "amlogic,gx-sound-card"; > model = "NANOPI-K2"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts > index cca129ce2c58..8c01a43e4e7a 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts > @@ -142,6 +142,10 @@ hdmi_connector_in: endpoint { > sound { > compatible = "amlogic,gx-sound-card"; > model = "NEXBOX-A95X"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > index c37cc6b036cd..6a794f72544d 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > @@ -177,6 +177,10 @@ hdmi_connector_in: endpoint { > sound { > compatible = "amlogic,gx-sound-card"; > model = "ODROID-C2"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts > index 7f94716876d3..3ba3681fe3ba 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts > @@ -68,6 +68,10 @@ button-menu { > sound { > compatible = "amlogic,gx-sound-card"; > model = "P200"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts > index 6f81eed83bec..32e1c272052e 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts > @@ -17,6 +17,10 @@ / { > sound { > compatible = "amlogic,gx-sound-card"; > model = "P201"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi > index 255e93a0b36d..cbb847b8d5fe 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi > @@ -108,6 +108,10 @@ sdio_pwrseq: sdio-pwrseq { > sound { > compatible = "amlogic,gx-sound-card"; > model = "VEGA-S95"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts > index af9ea32a2876..b5b0ced8ecff 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts > @@ -16,6 +16,10 @@ / { > sound { > compatible = "amlogic,gx-sound-card"; > model = "WETEK-HUB"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts > index 376760d86766..29749b053e1e 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts > @@ -48,6 +48,10 @@ button { > sound { > compatible = "amlogic,gx-sound-card"; > model = "WETEK-PLAY2"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts > index 90ef9c17d80b..6aef181ca2ce 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts > @@ -123,6 +123,10 @@ sound { > "Speaker", "9J5-2 RIGHT"; > audio-routing = "9J5-3 LEFT", "ACODEC LOLN", > "9J5-2 RIGHT", "ACODEC LORN"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts > index 08a4718219b1..fdc387c9b202 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts > @@ -128,6 +128,10 @@ sound { > "AU2 INR", "ACODEC LORN", > "Lineout", "AU2 OUTL", > "Lineout", "AU2 OUTR"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts > index fea65f20523a..065a7fc9d2fc 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts > @@ -67,6 +67,10 @@ hdmi_connector_in: endpoint { > sound { > compatible = "amlogic,gx-sound-card"; > model = "KHADAS-VIM"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts > index 63b20860067c..2fe5c6686657 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts > @@ -160,6 +160,10 @@ vcc_1v8: regulator-vcc-1v8 { > sound { > compatible = "amlogic,gx-sound-card"; > model = "LIBRETECH-CC-V2"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts > index 8b26c9661be1..4b40794721fd 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts > @@ -142,6 +142,10 @@ sound { > "AU2 INR", "ACODEC LORN", > "Lineout", "AU2 OUTL", > "Lineout", "AU2 OUTR"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts > index 9b4ea6a49398..98c6251142c4 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts > @@ -50,6 +50,10 @@ sound { > "AU2 INR", "ACODEC LORN", > "Lineout", "AU2 OUTL", > "Lineout", "AU2 OUTR"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts > index 07e7c3bedea0..d97fca396e0e 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts > @@ -150,6 +150,10 @@ wifi32k: wifi32k { > sound { > compatible = "amlogic,gx-sound-card"; > model = "KHADAS-VIM2"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts > index ad2dd4ad0a31..71ee228781fe 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts > @@ -86,6 +86,10 @@ hdmi_connector_in: endpoint { > sound { > compatible = "amlogic,gx-sound-card"; > model = "NEXBOX-A1"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts > index d05dde8da5c5..81387968f51d 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts > @@ -101,6 +101,10 @@ sdio_pwrseq: sdio-pwrseq { > sound { > compatible = "amlogic,gx-sound-card"; > model = "RBOX-PRO"; > + clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>, > <&clkc CLKID_MPLL2>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi > index e78cc9b577a0..bd4ffc07e456 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi > @@ -182,6 +182,10 @@ sound { > "TODDR_B IN 0", "TDMIN_A OUT", > "TODDR_C IN 0", "TDMIN_A OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi > index 082b72703cdf..746ce70b545b 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi > @@ -200,6 +200,10 @@ sound { > <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, > <&dioo2133>; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts > index 9b2eb6e42651..4cca62ddd04a 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts > @@ -22,6 +22,10 @@ sound { > "TDMOUT_B IN 2", "FRDDR_C OUT 1", > "TDM_B Playback", "TDMOUT_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts > index 6e34fd80ed71..4a2aef4948ff 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts > @@ -22,6 +22,10 @@ sound { > "TDMOUT_B IN 2", "FRDDR_C OUT 1", > "TDM_B Playback", "TDMOUT_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts > index 586034316ec3..3203280bffe7 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts > @@ -22,6 +22,10 @@ sound { > "TDMOUT_B IN 2", "FRDDR_C OUT 1", > "TDM_B Playback", "TDMOUT_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts > index f045bf851638..6db7c5ccdbbc 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts > @@ -57,6 +57,10 @@ sound { > "Lineout", "ACODEC LOLP", > "Lineout", "ACODEC LORP"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts > index e6e9410d40cb..918ace039da6 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts > @@ -22,6 +22,10 @@ sound { > "TDMOUT_B IN 2", "FRDDR_C OUT 1", > "TDM_B Playback", "TDMOUT_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi > index 951eb8e3f0c0..44d2346482a5 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi > @@ -174,6 +174,10 @@ sound { > "TDMOUT_B IN 2", "FRDDR_C OUT 1", > "TDM_B Playback", "TDMOUT_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts > index 3581e14cbf18..19b712e45066 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts > @@ -239,6 +239,10 @@ sound { > "TODDR_B IN 1", "TDMIN_B OUT", > "TODDR_C IN 1", "TDMIN_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts > index fc9b961133cd..c913af910208 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts > @@ -22,6 +22,10 @@ sound { > "TDMOUT_B IN 2", "FRDDR_C OUT 1", > "TDM_B Playback", "TDMOUT_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts > index 9ea969255b4f..49978855c2d9 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts > @@ -22,6 +22,10 @@ sound { > "TDMOUT_B IN 2", "FRDDR_C OUT 1", > "TDM_B Playback", "TDMOUT_B OUT"; > > + clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + clock-names = "mpll0", "mpll1", "mpll2"; > assigned-clocks = <&clkc CLKID_MPLL2>, > <&clkc CLKID_MPLL0>, > <&clkc CLKID_MPLL1>; -- Jerome ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2024-06-14 17:10 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-06-14 16:24 [PATCH RFC 0/3] ASoC: dt-bindings: amlogic-sound-cards: document clocks and clock-names Neil Armstrong 2024-06-14 16:24 ` [PATCH RFC 1/3] ASoC: dt-bindings: amlogic,axg-sound-card: " Neil Armstrong 2024-06-14 17:05 ` Jerome Brunet 2024-06-14 16:24 ` [PATCH RFC 2/3] ASoC: dt-bindings: amlogic,gx-sound-card: " Neil Armstrong 2024-06-14 16:24 ` [PATCH RFC 3/3] arm64: dts: amlogic: add clock and clock-names to sound cards Neil Armstrong 2024-06-14 17:10 ` Jerome Brunet
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).