From: Yixun Lan <dlan@gentoo.org>
To: Yangyu Chen <cyy@cyyself.name>
Cc: linux-riscv@lists.infradead.org,
Conor Dooley <conor+dt@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Samuel Holland <samuel.holland@sifive.com>,
Anup Patel <anup.patel@wdc.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 8/9] riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree
Date: Sun, 16 Jun 2024 22:31:49 +0000 [thread overview]
Message-ID: <20240616223149.GB3983622@ofsar> (raw)
In-Reply-To: <tencent_904B1050FBC0B10A172C263924BD518F8F05@qq.com>
Hi
On 01:20 Mon 17 Jun , Yangyu Chen wrote:
> Banana Pi BPI-F3 [1] is a industrial grade RISC-V development board, it
> design with SpacemiT K1 8 core RISC-V chip [2].
>
> Currently only support booting into console with only uart enabled,
> other features will be added soon later.
>
> [1] https://docs.banana-pi.org/en/BPI-F3/BananaPi_BPI-F3
> [2] https://www.spacemit.com/en/spacemit-key-stone-2/
>
> Signed-off-by: Yangyu Chen <cyy@cyyself.name>
> ---
> arch/riscv/boot/dts/Makefile | 1 +
> arch/riscv/boot/dts/spacemit/Makefile | 2 ++
> arch/riscv/boot/dts/spacemit/bananapi-f3.dts | 19 +++++++++++++++++++
> 3 files changed, 22 insertions(+)
> create mode 100644 arch/riscv/boot/dts/spacemit/Makefile
> create mode 100644 arch/riscv/boot/dts/spacemit/bananapi-f3.dts
>
> diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
> index fdae05bbf556..bff887d38abe 100644
> --- a/arch/riscv/boot/dts/Makefile
> +++ b/arch/riscv/boot/dts/Makefile
> @@ -5,6 +5,7 @@ subdir-y += microchip
> subdir-y += renesas
> subdir-y += sifive
> subdir-y += sophgo
> +subdir-y += spacemit
> subdir-y += starfive
> subdir-y += thead
>
> diff --git a/arch/riscv/boot/dts/spacemit/Makefile b/arch/riscv/boot/dts/spacemit/Makefile
> new file mode 100644
> index 000000000000..5c512f4e297d
> --- /dev/null
> +++ b/arch/riscv/boot/dts/spacemit/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_ARCH_SPACEMIT) += bananapi-f3.dtb
Can we have "k1" prefix at least? so k1-bananapi-f3.dtb
it's much clear to let people know the board has k1 SoC,
in case vendor has more chip series..
> diff --git a/arch/riscv/boot/dts/spacemit/bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/bananapi-f3.dts
> new file mode 100644
> index 000000000000..023274189b49
> --- /dev/null
> +++ b/arch/riscv/boot/dts/spacemit/bananapi-f3.dts
> @@ -0,0 +1,19 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2024 Yangyu Chen <cyy@cyyself.name>
> + */
> +
> +#include "k1.dtsi"
> +
> +/ {
> + model = "Banana Pi BPI-F3";
> + compatible = "bananapi,bpi-f3", "spacemit,k1";
> +
> + chosen {
> + stdout-path = "serial0";
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> --
> 2.45.1
>
--
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55
next prev parent reply other threads:[~2024-06-16 22:32 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-16 17:18 [PATCH v1 0/9] riscv: add initial support for SpacemiT K1 Yangyu Chen
2024-06-16 17:20 ` [PATCH v1 1/9] dt-bindings: vendor-prefixes: add spacemit Yangyu Chen
2024-06-18 15:46 ` Conor Dooley
2024-06-16 17:20 ` [PATCH v1 2/9] dt-bindings: riscv: Add SpacemiT X60 compatibles Yangyu Chen
2024-06-18 15:45 ` Conor Dooley
2024-06-16 17:20 ` [PATCH v1 3/9] dt-bindings: riscv: add SpacemiT K1 bindings Yangyu Chen
2024-06-16 18:42 ` Rob Herring (Arm)
2024-06-18 15:45 ` Conor Dooley
2024-06-16 17:20 ` [PATCH v1 4/9] dt-bindings: timer: Add SpacemiT K1 CLINT Yangyu Chen
2024-06-18 15:40 ` Conor Dooley
2024-06-18 15:48 ` Yangyu Chen
2024-06-18 17:05 ` Conor Dooley
2024-06-16 17:20 ` [PATCH v1 5/9] dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC Yangyu Chen
2024-06-18 15:44 ` Conor Dooley
2024-06-16 17:20 ` [PATCH v1 6/9] riscv: add SpacemiT SOC family Kconfig support Yangyu Chen
2024-06-16 22:26 ` Yixun Lan
2024-06-17 2:12 ` Yangyu Chen
2024-06-16 23:06 ` Yixun Lan
2024-06-17 2:12 ` Yangyu Chen
2024-06-16 17:20 ` [PATCH v1 7/9] riscv: dts: add initial SpacemiT K1 SoC device tree Yangyu Chen
2024-06-16 22:53 ` Yixun Lan
2024-06-17 2:10 ` Yangyu Chen
2024-06-17 6:02 ` Yixun Lan
2024-06-17 7:31 ` Conor Dooley
2024-06-17 12:49 ` Jisheng Zhang
2024-06-17 13:29 ` Conor Dooley
2024-06-17 13:31 ` Jisheng Zhang
2024-06-17 17:01 ` Yangyu Chen
2024-06-16 17:20 ` [PATCH v1 8/9] riscv: dts: spacemit: add Banana Pi BPI-F3 board " Yangyu Chen
2024-06-16 22:31 ` Yixun Lan [this message]
2024-06-17 2:16 ` Yangyu Chen
2024-06-16 17:20 ` [PATCH v1 9/9] riscv: defconfig: enable SpacemiT SoC Yangyu Chen
2024-06-16 18:35 ` [PATCH v1 0/9] riscv: add initial support for SpacemiT K1 Conor Dooley
2024-06-16 22:48 ` Yixun Lan
2024-06-17 2:00 ` Yangyu Chen
2024-06-17 7:28 ` Conor Dooley
2024-06-17 8:15 ` Icenowy Zheng
2024-06-17 14:11 ` Jisheng Zhang
2024-06-17 15:32 ` Conor Dooley
2024-06-17 16:39 ` Yangyu Chen
2024-06-17 17:14 ` Conor Dooley
2024-06-17 17:42 ` Yangyu Chen
2024-06-18 6:58 ` Conor Dooley
2024-06-18 4:39 ` Jisheng Zhang
2024-06-18 4:34 ` Jisheng Zhang
2024-06-18 10:16 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240616223149.GB3983622@ofsar \
--to=dlan@gentoo.org \
--cc=anup.patel@wdc.com \
--cc=conor+dt@kernel.org \
--cc=cyy@cyyself.name \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
--cc=samuel.holland@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).