From: Michael Walle <mwalle@kernel.org>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Li Yang <leoyang.li@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Priit Laes <plaes@plaes.org>,
Michael Grzeschik <m.grzeschik@pengutronix.de>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Marco Felsch <m.felsch@pengutronix.de>,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Michael Walle <mwalle@kernel.org>
Subject: [PATCH v3 13/13] ARM: dts: imx6qdl-kontron-samx6i: add actual device trees
Date: Mon, 17 Jun 2024 11:13:41 +0200 [thread overview]
Message-ID: <20240617091341.2375325-14-mwalle@kernel.org> (raw)
In-Reply-To: <20240617091341.2375325-1-mwalle@kernel.org>
For now, there wasn't any in-tree users of the dtsi files for the
Kontron SMARC-sAMX6i board. Let's add device trees, for this board on a
Kontron SMARC Eval 2.0 Carrier.
Signed-off-by: Michael Walle <mwalle@kernel.org>
---
arch/arm/boot/dts/nxp/imx/Makefile | 2 +
.../nxp/imx/imx6dl-kontron-samx6i-ads2.dts | 12 ++
.../dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts | 12 ++
.../nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi | 148 ++++++++++++++++++
4 files changed, 174 insertions(+)
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index 231c0d73a53e..92e291603ea1 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -99,6 +99,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-icore.dtb \
imx6dl-icore-mipi.dtb \
imx6dl-icore-rqs.dtb \
+ imx6dl-kontron-samx6i-ads2.dtb \
imx6dl-lanmcu.dtb \
imx6dl-mamoj.dtb \
imx6dl-mba6a.dtb \
@@ -207,6 +208,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-icore-ofcap10.dtb \
imx6q-icore-ofcap12.dtb \
imx6q-icore-rqs.dtb \
+ imx6q-kontron-samx6i-ads2.dtb \
imx6q-kp-tpc.dtb \
imx6q-logicpd.dtb \
imx6q-marsboard.dtb \
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
new file mode 100644
index 000000000000..6a0c53f23a15
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include "imx6qdl-kontron-samx6i-ads2.dtsi"
+
+/ {
+ model = "Kontron SMARC-sAMX6i Dual-Lite/Solo on SMARC Eval 2.0 carrier";
+ compatible = "kontron,imx6dl-samx6i-ads2", "kontron,imx6dl-samx6i", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts
new file mode 100644
index 000000000000..94c395cc020e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include "imx6qdl-kontron-samx6i-ads2.dtsi"
+
+/ {
+ model = "Kontron SMARC-sAMX6i Quad/Dual on SMARC Eval 2.0 carrier";
+ compatible = "kontron,imx6q-samx6i-ads2", "kontron,imx6q-samx6i", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi
new file mode 100644
index 000000000000..b4a79245b7b6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree include for the Kontron SMARC-sAMX6i board on a SMARC Eval
+ * 2.0 carrier (ADS2).
+ *
+ */
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ sound {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Out Jack",
+ "Microphone", "Microphone Jack",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "Line Out Jack", "LINEOUTR",
+ "Line Out Jack", "LINEOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "IN1L", "Line In Jack",
+ "IN1R", "Line In Jack",
+ "Microphone Jack", "MICBIAS",
+ "IN2L", "Microphone Jack",
+ "IN2R", "Microphone Jack";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&wm8904>;
+ };
+ };
+
+ reg_codec_mic: regulator-codec-mic {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_MIC";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_codec_1p8v: regulator-codec-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "V_1V8_S0_CODEC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&audmux {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&can2 {
+ status = "okay";
+};
+
+&ecspi4 {
+ flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <100000000>;
+ m25p,fast-read;
+ };
+};
+
+&fec {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ wm8904: audio-codec@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ clocks = <&clks IMX6QDL_CLK_CKO2>;
+ clock-names = "mclk";
+ AVDD-supply = <®_codec_1p8v>;
+ CPVDD-supply = <®_codec_1p8v>;
+ DBVDD-supply = <®_codec_1p8v>;
+ DCVDD-supply = <®_codec_1p8v>;
+ MICVDD-supply = <®_codec_mic>;
+ };
+};
+
+&i2c3 {
+ eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ pagesize = <32>;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+&usdhc3 {
+ status = "okay";
+};
--
2.39.2
next prev parent reply other threads:[~2024-06-17 9:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-17 9:13 [PATCH v3 00/13] ARM: dts: kontron-samx6i: various fixes Michael Walle
2024-06-17 9:13 ` [PATCH v3 01/13] ARM: dts: imx6qdl-kontron-samx6i: fix phy-mode Michael Walle
2024-06-17 9:13 ` [PATCH v3 02/13] ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset Michael Walle
2024-06-17 9:13 ` [PATCH v3 03/13] ARM: dts: imx6qdl-kontron-samx6i: fix board reset Michael Walle
2024-06-17 9:13 ` [PATCH v3 04/13] ARM: dts: imx6qdl-kontron-samx6i: cleanup the PMIC node Michael Walle
2024-06-17 9:13 ` [PATCH v3 05/13] ARM: dts: imx6qdl-kontron-samx6i: fix SPI0 chip selects Michael Walle
2024-06-17 9:13 ` [PATCH v3 06/13] ARM: dts: imx6qdl-kontron-samx6i: fix product name Michael Walle
2024-06-17 9:13 ` [PATCH v3 07/13] ARM: dts: imx6qdl-kontron-samx6i: always enable eMMC Michael Walle
2024-06-17 9:13 ` [PATCH v3 08/13] ARM: dts: imx6qdl-kontron-samx6i: add SDIO_PWR_EN support Michael Walle
2024-06-17 9:13 ` [PATCH v3 09/13] ARM: dts: imx6qdl-kontron-samx6i: fix node names Michael Walle
2024-06-17 9:13 ` [PATCH v3 10/13] ARM: dts: imx6qdl-kontron-samx6i: fix PCIe reset polarity Michael Walle
2024-06-17 9:13 ` [PATCH v3 11/13] ARM: dts: imx6qdl-kontron-samx6i: remove wake-up-gpio property Michael Walle
2024-06-17 9:13 ` [PATCH v3 12/13] dt-bindings: arm: fsl: document Kontron SMARC-sAMX6i boards Michael Walle
2024-06-17 9:13 ` Michael Walle [this message]
2024-06-27 7:25 ` [PATCH v3 00/13] ARM: dts: kontron-samx6i: various fixes Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240617091341.2375325-14-mwalle@kernel.org \
--to=mwalle@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.felsch@pengutronix.de \
--cc=m.grzeschik@pengutronix.de \
--cc=plaes@plaes.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).