From: Christophe Roullier <christophe.roullier@foss.st.com>
To: "David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Richard Cochran <richardcochran@gmail.com>,
Jose Abreu <joabreu@synopsys.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Christophe Roullier <christophe.roullier@foss.st.com>,
Marek Vasut <marex@denx.de>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 0/3] Series DTs to deliver Ethernet for STM32MP25
Date: Wed, 19 Jun 2024 14:58:12 +0200 [thread overview]
Message-ID: <20240619125815.358207-1-christophe.roullier@foss.st.com> (raw)
STM32MP25 is STM32 SOC with 2 GMACs instances.
GMAC IP version is SNPS 5.3x.
GMAC IP configure with 2 RX and 4 TX queue.
DMA HW capability register supported
RX Checksum Offload Engine supported
TX Checksum insertion supported
Wake-Up On Lan supported
TSO supported
Delivered Ethernet2 instance for board EV1 which is connected
to Realtek PHY in RGMII mode.
Ethernet1 instance will be delivered in next step.
V2: - Remark from Marek (sort DT)
Christophe Roullier (3):
arm64: dts: st: add ethernet1 and ethernet2 support on stm32mp25
arm64: dts: st: add eth2 pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: dts: st: enable Ethernet2 on stm32mp257f-ev1 board
arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 59 +++++++++++++++++++
arch/arm64/boot/dts/st/stm32mp251.dtsi | 49 +++++++++++++++
arch/arm64/boot/dts/st/stm32mp253.dtsi | 51 ++++++++++++++++
arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 24 ++++++++
4 files changed, 183 insertions(+)
base-commit: 382d1741b5b2feffef7942dd074206372afe1a96
--
2.25.1
next reply other threads:[~2024-06-19 13:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-19 12:58 Christophe Roullier [this message]
2024-06-19 12:58 ` [PATCH v2 1/3] arm64: dts: st: add ethernet1 and ethernet2 support on stm32mp25 Christophe Roullier
2024-06-19 13:44 ` Marek Vasut
2024-06-19 12:58 ` [PATCH v2 2/3] arm64: dts: st: add eth2 pinctrl entries in stm32mp25-pinctrl.dtsi Christophe Roullier
2024-06-19 13:45 ` Marek Vasut
2024-06-19 12:58 ` [PATCH v2 3/3] arm64: dts: st: enable Ethernet2 on stm32mp257f-ev1 board Christophe Roullier
2024-06-19 13:45 ` Marek Vasut
2024-06-27 14:33 ` [PATCH v2 0/3] Series DTs to deliver Ethernet for STM32MP25 Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240619125815.358207-1-christophe.roullier@foss.st.com \
--to=christophe.roullier@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=joabreu@synopsys.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=marex@denx.de \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).