From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: "Andi Shyti" <andi.shyti@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Nicolas Ferre" <nicolas.ferre@microchip.com>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Claudiu Beznea" <claudiu.beznea@tuxon.dev>,
"Sergiu Moga" <sergiu.moga@microchip.com>,
"Benson Leung" <bleung@chromium.org>,
"Guenter Roeck" <groeck@chromium.org>,
"Doug Anderson" <dianders@chromium.org>,
"Enric Balletbo i Serra" <eballetbo@kernel.org>,
"Ricardo Cañuelo" <ricardo.canuelo@collabora.com>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Jonathan Hunter" <jonathanh@nvidia.com>,
"Vignesh R" <vigneshr@ti.com>,
"Kamal Dasu" <kamal.dasu@broadcom.com>,
"Broadcom internal kernel review list"
<bcm-kernel-feedback-list@broadcom.com>,
"Florian Fainelli" <florian.fainelli@broadcom.com>,
"Wolfram Sang" <wsa+renesas@sang-engineering.com>,
"Chris Brandt" <chris.brandt@renesas.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Magnus Damm" <magnus.damm@gmail.com>,
"Pierre-Yves MORDRET" <pierre-yves.mordret@foss.st.com>
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, chrome-platform@lists.linux.dev,
linux-tegra@vger.kernel.org,
Krzysztof Kozlowski <krzk@kernel.org>,
linux-omap@vger.kernel.org, Kamal Dasu <kdasu.kdev@gmail.com>,
linux-renesas-soc@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 7/7] dt-bindings: i2c: adjust indentation in DTS example to coding style
Date: Thu, 20 Jun 2024 13:34:55 +0200 [thread overview]
Message-ID: <20240620-dt-bindings-i2c-clean-v1-7-3a1016a95f9d@linaro.org> (raw)
In-Reply-To: <20240620-dt-bindings-i2c-clean-v1-0-3a1016a95f9d@linaro.org>
Bindings coding style expects 2- or 4-space indentation in the DTS
example. Correct files having something odd (6- or 8-space) to 4-space
while re-ordering few properties according to DTS coding style (the
first property should be compatible, then reg/ranges). No functional
impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 28 +++---
.../devicetree/bindings/i2c/i2c-demux-pinctrl.yaml | 106 ++++++++++-----------
.../devicetree/bindings/i2c/renesas,iic-emev2.yaml | 14 +--
.../devicetree/bindings/i2c/renesas,rcar-i2c.yaml | 20 ++--
.../devicetree/bindings/i2c/renesas,riic.yaml | 34 +++----
.../bindings/i2c/renesas,rmobile-iic.yaml | 24 ++---
.../devicetree/bindings/i2c/st,stm32-i2c.yaml | 66 ++++++-------
.../devicetree/bindings/i2c/ti,omap4-i2c.yaml | 12 +--
8 files changed, 152 insertions(+), 152 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
index 7070c04469ed..ac9ddf228c82 100644
--- a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
@@ -76,21 +76,21 @@ else:
examples:
- |
- bsca: i2c@f0406200 {
- clock-frequency = <390000>;
- compatible = "brcm,brcmstb-i2c";
- interrupt-parent = <&irq0_intc>;
- reg = <0xf0406200 0x58>;
- interrupts = <0x18>;
- interrupt-names = "upg_bsca";
- };
+ bsca: i2c@f0406200 {
+ compatible = "brcm,brcmstb-i2c";
+ reg = <0xf0406200 0x58>;
+ clock-frequency = <390000>;
+ interrupt-parent = <&irq0_intc>;
+ interrupts = <0x18>;
+ interrupt-names = "upg_bsca";
+ };
- |
- ddc0: i2c@7ef04500 {
- compatible = "brcm,bcm2711-hdmi-i2c";
- reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
- reg-names = "bsc", "auto-i2c";
- clock-frequency = <390000>;
- };
+ ddc0: i2c@7ef04500 {
+ compatible = "brcm,bcm2711-hdmi-i2c";
+ reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+ reg-names = "bsc", "auto-i2c";
+ clock-frequency = <390000>;
+ };
...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
index b813f6d4810c..1eaf00b90a77 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
@@ -109,65 +109,65 @@ examples:
// Example for a bus to be demuxed. It contains various I2C clients for
// HDMI, so the bus is named "i2c-hdmi":
i2chdmi: i2c-mux3 {
- compatible = "i2c-demux-pinctrl";
- i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
- i2c-bus-name = "i2c-hdmi";
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
+ i2c-bus-name = "i2c-hdmi";
+ #address-cells = <1>;
+ #size-cells = <0>;
- ak4643: codec@12 {
- compatible = "asahi-kasei,ak4643";
- #sound-dai-cells = <0>;
- reg = <0x12>;
+ ak4643: codec@12 {
+ compatible = "asahi-kasei,ak4643";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep0>;
+ };
};
+ };
- composite-in@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&cec_clock>;
+ clock-names = "cec";
- port {
- adv7180: endpoint {
- bus-width = <8>;
- remote-endpoint = <&vin1ep0>;
- };
+ avdd-supply = <&fixedregulator1v8>;
+ dvdd-supply = <&fixedregulator1v8>;
+ pvdd-supply = <&fixedregulator1v8>;
+ dvdd-3v-supply = <&fixedregulator3v3>;
+ bgvdd-supply = <&fixedregulator1v8>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
};
- };
+ };
- hdmi@39 {
- compatible = "adi,adv7511w";
- reg = <0x39>;
- interrupt-parent = <&gpio1>;
- interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&cec_clock>;
- clock-names = "cec";
-
- avdd-supply = <&fixedregulator1v8>;
- dvdd-supply = <&fixedregulator1v8>;
- pvdd-supply = <&fixedregulator1v8>;
- dvdd-3v-supply = <&fixedregulator3v3>;
- bgvdd-supply = <&fixedregulator1v8>;
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7511_in: endpoint {
- remote-endpoint = <&lvds0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con_out>;
- };
- };
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
};
+ };
};
+ };
};
diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
index 17c1102562be..551cfa6f885a 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
@@ -44,11 +44,11 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
iic0: i2c@e0070000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,iic-emev2";
- reg = <0xe0070000 0x28>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
- clocks = <&iic0_sclk>;
- clock-names = "sclk";
+ compatible = "renesas,iic-emev2";
+ reg = <0xe0070000 0x28>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&iic0_sclk>;
+ clock-names = "sclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
index 51b220da461b..6cc60c3f61cd 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
@@ -153,14 +153,14 @@ examples:
#include <dt-bindings/power/r8a7791-sysc.h>
i2c0: i2c@e6508000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
- reg = <0xe6508000 0x40>;
- interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <400000>;
- clocks = <&cpg CPG_MOD 931>;
- power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
- resets = <&cpg 931>;
- i2c-scl-internal-delay-ns = <6>;
+ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
+ reg = <0xe6508000 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
index 91ecf17b7a81..7993fe463c4c 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
@@ -97,21 +97,21 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
i2c0: i2c@fcfee000 {
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfee000 0x44>;
- interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
- "tmoi";
- clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
- clock-frequency = <100000>;
- power-domains = <&cpg_clocks>;
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee000 0x44>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
+ "tmoi";
+ clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+ clock-frequency = <100000>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
index 04e4ffd80bc0..ec5222a1224f 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
@@ -134,16 +134,16 @@ examples:
#include <dt-bindings/power/r8a7790-sysc.h>
iic0: i2c@e6500000 {
- compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
- "renesas,rmobile-iic";
- reg = <0xe6500000 0x425>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 318>;
- clock-frequency = <400000>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
- dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
- resets = <&cpg 318>;
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
+ reg = <0xe6500000 0x425>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>;
+ clock-frequency = <400000>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index 8fd8be76875e..457bb0702ed9 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -145,31 +145,31 @@ examples:
#include <dt-bindings/mfd/stm32f7-rcc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
//Example 1 (with st,stm32f4-i2c compatible)
- i2c@40005400 {
- compatible = "st,stm32f4-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x40005400 0x400>;
- interrupts = <31>,
- <32>;
- resets = <&rcc 277>;
- clocks = <&rcc 0 149>;
- };
+ i2c@40005400 {
+ compatible = "st,stm32f4-i2c";
+ reg = <0x40005400 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc 277>;
+ clocks = <&rcc 0 149>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- |
#include <dt-bindings/mfd/stm32f7-rcc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
//Example 2 (with st,stm32f7-i2c compatible)
- i2c@40005800 {
- compatible = "st,stm32f7-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x40005800 0x400>;
- interrupts = <31>,
- <32>;
- resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
- clocks = <&rcc 1 CLK_I2C1>;
- };
+ i2c@40005800 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40005800 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+ clocks = <&rcc 1 CLK_I2C1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- |
#include <dt-bindings/mfd/stm32f7-rcc.h>
@@ -178,16 +178,16 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
- i2c@40013000 {
- compatible = "st,stm32mp15-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x40013000 0x400>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C2_K>;
- resets = <&rcc I2C2_R>;
- i2c-scl-rising-time-ns = <185>;
- i2c-scl-falling-time-ns = <20>;
- st,syscfg-fmp = <&syscfg 0x4 0x2>;
- };
+ i2c@40013000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x40013000 0x400>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C2_K>;
+ resets = <&rcc I2C2_R>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ st,syscfg-fmp = <&syscfg 0x4 0x2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
index c9d1030e9857..8c2e35fabf5b 100644
--- a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
@@ -82,9 +82,9 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
main_i2c0: i2c@2000000 {
- compatible = "ti,j721e-i2c", "ti,omap4-i2c";
- reg = <0x2000000 0x100>;
- interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x2000000 0x100>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
--
2.43.0
next prev parent reply other threads:[~2024-06-20 11:35 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-20 11:34 [PATCH 0/7] dt-bindings: i2c: few fixes and cleanups Krzysztof Kozlowski
2024-06-20 11:34 ` [PATCH 1/7] dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema Krzysztof Kozlowski
2024-06-20 11:34 ` [PATCH 2/7] dt-bindings: i2c: google,cros-ec-i2c-tunnel: " Krzysztof Kozlowski
2024-06-20 16:06 ` Conor Dooley
2024-06-20 11:34 ` [PATCH 3/7] dt-bindings: i2c: atmel,at91sam: drop unneeded address/size-cells Krzysztof Kozlowski
2024-06-20 11:34 ` [PATCH 4/7] dt-bindings: i2c: nvidia,tegra20: " Krzysztof Kozlowski
2024-06-20 11:34 ` [PATCH 5/7] dt-bindings: i2c: samsung,s3c2410: " Krzysztof Kozlowski
2024-06-20 11:34 ` [PATCH 6/7] dt-bindings: i2c: ti,omap4: reference i2c-controller.yaml schema Krzysztof Kozlowski
2024-06-20 11:34 ` Krzysztof Kozlowski [this message]
2024-06-20 16:06 ` [PATCH 0/7] dt-bindings: i2c: few fixes and cleanups Conor Dooley
2024-06-20 23:05 ` Andi Shyti
2024-06-21 6:02 ` Krzysztof Kozlowski
2024-06-21 9:27 ` Andi Shyti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240620-dt-bindings-i2c-clean-v1-7-3a1016a95f9d@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andi.shyti@kernel.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bleung@chromium.org \
--cc=chris.brandt@renesas.com \
--cc=chrome-platform@lists.linux.dev \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=eballetbo@kernel.org \
--cc=florian.fainelli@broadcom.com \
--cc=geert+renesas@glider.be \
--cc=groeck@chromium.org \
--cc=jonathanh@nvidia.com \
--cc=kamal.dasu@broadcom.com \
--cc=kdasu.kdev@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-tegra@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=nicolas.ferre@microchip.com \
--cc=pierre-yves.mordret@foss.st.com \
--cc=ricardo.canuelo@collabora.com \
--cc=robh@kernel.org \
--cc=sergiu.moga@microchip.com \
--cc=thierry.reding@gmail.com \
--cc=vigneshr@ti.com \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).