[PATCH v2 1/2] pinctrl: aspeed-g6: Add NCSI pin group config

[Potin Lai <potin.lai.pt@gmail.com>]

In the NCSI pin table, the reference clock output pin (RMIIXRCLKO) is not
needed on the management controller side.

To optimize pin usage, add new NCSI pin groupis that excludes RMIIXRCLKO,
reducing the number of required pins.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index 7938741136a2c..31e4e0b342a00 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -249,7 +249,9 @@ PIN_DECL_2(E26, GPIOD3, RGMII3RXD3, RMII3RXER);
 
 FUNC_GROUP_DECL(RGMII3, H24, J22, H22, H23, G22, F22, G23, G24, F23, F26, F25,
 		E26);
-FUNC_GROUP_DECL(RMII3, H24, J22, H22, H23, G23, F23, F26, F25, E26);
+GROUP_DECL(RMII3, H24, J22, H22, H23, G23, F23, F26, F25, E26);
+GROUP_DECL(NCSI3, J22, H22, H23, G23, F23, F26, F25, E26);
+FUNC_DECL_2(RMII3, RMII3, NCSI3);
 
 #define F24 28
 SIG_EXPR_LIST_DECL_SESG(F24, NCTS3, NCTS3, SIG_DESC_SET(SCU410, 28));
@@ -355,7 +357,9 @@ FUNC_GROUP_DECL(NRTS4, B24);
 
 FUNC_GROUP_DECL(RGMII4, F24, E23, E24, E25, D26, D24, C25, C26, C24, B26, B25,
 		B24);
-FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
+GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
+GROUP_DECL(NCSI4, E23, E24, E25, C25, C24, B26, B25, B24);
+FUNC_DECL_2(RMII4, RMII4, NCSI4);
 
 #define D22 40
 SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8));
@@ -1976,6 +1980,8 @@ static const struct aspeed_pin_group aspeed_g6_groups[] = {
 	ASPEED_PINCTRL_GROUP(MDIO2),
 	ASPEED_PINCTRL_GROUP(MDIO3),
 	ASPEED_PINCTRL_GROUP(MDIO4),
+	ASPEED_PINCTRL_GROUP(NCSI3),
+	ASPEED_PINCTRL_GROUP(NCSI4),
 	ASPEED_PINCTRL_GROUP(NCTS1),
 	ASPEED_PINCTRL_GROUP(NCTS2),
 	ASPEED_PINCTRL_GROUP(NCTS3),
-- 
2.31.1