[PATCH 0/4] Add LBA3368 board

[PATCH 0/4] Add LBA3368 board

[Alex Bee]

This series aims to add support for RK3368 based LBA3368 industrial board
form Neardi. The device tree currently only contains entries for which both
bindings and linux driver exists and is expected to be exended in future.

NB: checkpatch throws me a warning that no venddor-prefix for "usb5e3"
exists - which is true - but "usb5e3,610" has a valid binding.


Alex Bee (4):
  dt-bindings: vendor-prefixes: Add Neardi Technology
  dt-bindings: arm: rockchip: Add Neardi LBA3368
  arm64: dts: rockchip: Add sound-dai-cells for RK3368
  arm64: dts: rockchip: Add Neardi LBA3368 board

 .../devicetree/bindings/arm/rockchip.yaml     |   5 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3368-lba3368.dts      | 666 ++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3368.dtsi      |   3 +
 5 files changed, 677 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts

-- 
2.45.2

[PATCH 1/4] dt-bindings: vendor-prefixes: Add Neardi Technology

[Alex Bee]

Add vendor prefix for Shanghai Neardi Technology Co., Ltd.
(http://neardi.com/)

Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index fbf47f0bacf1..6e879abec71d 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -995,6 +995,8 @@ patternProperties:
     description: MYIR Tech Limited
   "^national,.*":
     description: National Semiconductor
+  "^neardi,.*":
+    description: Shanghai Neardi Technology Co., Ltd.
   "^nec,.*":
     description: NEC LCD Technologies, Ltd.
   "^neonode,.*":
-- 
2.45.2

[PATCH 2/4] dt-bindings: arm: rockchip: Add Neardi LBA3368

[Alex Bee]

Add Neardi LBA3368, a RK3368 based industrial board.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index eca0a42eb384..d2e887415d5d 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -634,6 +634,11 @@ properties:
           - const: mqmaker,miqi
           - const: rockchip,rk3288
 
+      - description: Neardi LBA3368
+        items:
+          - const: neardi,lba3368
+          - const: rockchip,rk3368
+
       - description: Netxeon R89 board
         items:
           - const: netxeon,r89
-- 
2.45.2

[PATCH 3/4] arm64: dts: rockchip: Add sound-dai-cells for RK3368

[Alex Bee]

Add the missing #sound-dai-cells for RK3368's I2S and S/PDIF controllers.

Fixes: f7d89dfe1e31 ("arm64: dts: rockchip: add i2s nodes support for RK3368 SoCs")
Fixes: 0328d68ea76d ("arm64: dts: rockchip: add rk3368 spdif node")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3368.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 734f87db4d11..73618df7a889 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -793,6 +793,7 @@ spdif: spdif@ff880000 {
 		dma-names = "tx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spdif_tx>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -804,6 +805,7 @@ i2s_2ch: i2s-2ch@ff890000 {
 		clocks = <&cru SCLK_I2S_2CH>, <&cru HCLK_I2S_2CH>;
 		dmas = <&dmac_bus 6>, <&dmac_bus 7>;
 		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -817,6 +819,7 @@ i2s_8ch: i2s-8ch@ff898000 {
 		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s_8ch_bus>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
-- 
2.45.2

[PATCH 4/4] arm64: dts: rockchip: Add Neardi LBA3368 board

[Alex Bee]

LBA3368 is a RK3368 based industrial board from Neardi.

Specs:
 - 1 GB DDR3 DRAM
 - 8/16 GB eMMC
 - µSD slot
 - 100 mbit ethernet (optional 12V PoE)
 - Ampak AP6255 Wifi/BT combo
 - ADC button
 - 4 x USB 2.0 via onboard GL852G HUB connected to SoC's ehci host
   - 2 exposed as USB-A
   - 2 via 2-mm-4-pin connectors
 - micro USB OTG connector
 - 2 x UART TTL (2-mm-4-pin connectors)
 - CSI connector
 - DSI connector
 - eDP connector
 - HDMI 2.0a output (type A)
 - touchpad connector (I2C, 3.3V)
 - ALC5640 audio codec
   - combined headphone/microphone jack
   - speaker connector pads

Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3368-lba3368.dts      | 666 ++++++++++++++++++
 2 files changed, 667 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 85d949f2c909..90f5172f37e6 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lba3368.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts b/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
new file mode 100644
index 000000000000..ec7d6e7b2cf5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/clock/rockchip,rk808.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/rt5640.h>
+#include "rk3368.dtsi"
+
+/ {
+	model = "Neardi LBA3368";
+	compatible = "neardi,lba3368", "rockchip,rk3368";
+
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio0;
+		rtc0 = &hym8563;
+		rtc1 = &rk808;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	adc-key {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		poll-interval = <100>;
+		keyup-threshold-microvolt = <1800000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		dais = <&i2s_8ch_p0>;
+		hp-det-gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		label = "alc5640";
+		routing = "Mic Jack", "MICBIAS1",
+			  "IN1P", "Mic Jack",
+			  "Headphone Jack", "HPOL",
+			  "Headphone Jack", "HPOR",
+			  "Speakers", "SPORP",
+			  "Speakers", "SPORN",
+			  "Speakers", "SPOLP",
+			  "Speakers", "SPOLN";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphone Jack",
+			  "Speaker", "Speakers";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det>;
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	ext_gmac: gmac-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	hub_avdd: hub-avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "hub_avdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-led {
+			pinctrl-0 = <&power_led>;
+			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 RK808_CLKOUT1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on>;
+	};
+
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+	};
+
+	vcc_otg: vcc-otg-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd10_usb: vdd10-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd10_usb";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		vin-supply = <&vdd_10>;
+		regulator-always-on;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_18>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	cap-mmc-highspeed;
+	non-removable;
+	no-sd;
+	no-sdio;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "input";
+	phy-handle = <&phy>;
+	phy-mode = "rmii";
+	phy-supply = <&vcc_lan>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			max-speed = <100>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000000>;
+			reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&phy_rst>;
+		};
+	};
+};
+
+&io_domains {
+	audio-supply = <&vcca1v8_codec>;
+	dvp-supply = <&vcc_18>;
+	flash0-supply = <&vcc_18>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vdd1v8_wl>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupts-extended = <&gpio0 RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "xin32k_wifi_bt";
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &pmic_sleep>;
+		system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_cpu";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <6001>;
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-suspend-microvolt = <1000000>;
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-suspend-microvolt = <3300000>;
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG2 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-suspend-microvolt = <1000000>;
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd1v8_wl: LDO_REG4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vdd1v8_wl";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+
+				regulator-state-mem {
+					regulator-suspend-microvolt = <1800000>;
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_tp: SWITCH_REG1 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_tp";
+
+				regulator-state-mem {
+					regulator-suspend-microvolt = <3300000>;
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_sd: SWITCH_REG2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_sd";
+
+				regulator-state-mem {
+					regulator-suspend-microvolt = <3300000>;
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	codec@1c {
+		compatible = "realtek,rt5640";
+		reg = <0x1c>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_IN1P>;
+		realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_IN1N>;
+		realtek,in1-differential;
+		#sound-dai-cells = <0>;
+
+		port {
+			rt5640_p0_0: endpoint {
+				remote-endpoint = <&i2s_8ch_p0_0>;
+			};
+		};
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		clock-output-names = "xin32k";
+		#clock-cells = <0>;
+	};
+
+};
+
+&i2s_8ch {
+	status = "okay";
+
+	i2s_8ch_p0: port {
+		i2s_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&rt5640_p0_0>;
+		};
+	};
+};
+
+&pinctrl {
+
+	bt {
+		bt_host_wake: bt-host-wake {
+			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake: bt-wake {
+			rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		power_led: power-led {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	phy {
+		phy_rst: phy-rst {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_det: hp-det {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake: wifi-host-wake {
+			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu-supply = <&vcc_io>;
+	vop-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	vqmmc-supply = <&vdd1v8_wl>;
+	vmmc-supply = <&vcc_io>;
+	assigned-clocks = <&cru SCLK_SDIO0>;
+	assigned-clock-parents = <&cru PLL_CPLL>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	no-sd;
+	no-mmc;
+	non-removable;
+	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupts-extended = <&gpio3 RK_PA6 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4 &sdmmc_cd>;
+	cap-sd-highspeed;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 RK808_CLKOUT1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		vbat-supply = <&vcc_io>;
+		vddio-supply = <&vdd1v8_wl>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake &bt_wake &bt_reg_on>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&hub_avdd>;
+	};
+};
+
+&usb_otg {
+	vbus-supply = <&vcc_otg>;
+	vusb_a-supply = <&vcc_io>;
+	vusb_d-supply = <&vdd10_usb>;
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
-- 
2.45.2

Re: [PATCH 2/4] dt-bindings: arm: rockchip: Add Neardi LBA3368

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 223 bytes --]

On Fri, Jun 21, 2024 at 03:40:28PM +0200, Alex Bee wrote:
> Add Neardi LBA3368, a RK3368 based industrial board.
> 
> Signed-off-by: Alex Bee <knaerzche@gmail.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 1/4] dt-bindings: vendor-prefixes: Add Neardi Technology

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 253 bytes --]

On Fri, Jun 21, 2024 at 03:40:27PM +0200, Alex Bee wrote:
> Add vendor prefix for Shanghai Neardi Technology Co., Ltd.
> (http://neardi.com/)
> 
> Signed-off-by: Alex Bee <knaerzche@gmail.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]