From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@kernel.org>
To: Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
cros-qcom-dts-watchers@chromium.org,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
George Chan <gchan9527@gmail.com>
Subject: [PATCH RFT v3 4/5] media: qcom: camss: Add sc7180 resources
Date: Mon, 24 Jun 2024 20:13:15 +0800 [thread overview]
Message-ID: <20240624-b4-sc7180-camss-v3-4-89ece6471431@gmail.com> (raw)
In-Reply-To: <20240624-b4-sc7180-camss-v3-0-89ece6471431@gmail.com>
From: George Chan <gchan9527@gmail.com>
This commit describes the hardware layout for the sc7180 for the
following hardware blocks:
- 2 x VFE
- 1 x VFE Lite
- 2 x CSID
- 1 x CSID Lite
- 4 x CSI PHY
Signed-off-by: George Chan <gchan9527@gmail.com>
---
drivers/media/platform/qcom/camss/camss.c | 251 ++++++++++++++++++++++++++++++
1 file changed, 251 insertions(+)
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 1f1f44f6fbb2..9ed810afc048 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -834,6 +834,244 @@ static const struct camss_subdev_resources vfe_res_845[] = {
}
};
+static const struct camss_subdev_resources csiphy_res_7180[] = {
+ /* CSIPHY0 */
+ {
+ .regulators = {},
+ .clock = {
+ "csiphy0",
+ "csiphy0_timer"
+ },
+ .clock_rate = {
+ { 150000000, 270000000, 360000000 },
+ { 300000000 },
+ },
+ .reg = { "csiphy0" },
+ .interrupt = { "csiphy0" },
+ .csiphy = {
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY1 */
+ {
+ .regulators = {},
+ .clock = {
+ "csiphy1",
+ "csiphy1_timer"
+ },
+ .clock_rate = {
+ { 150000000, 270000000, 360000000 },
+ { 300000000 },
+ },
+ .reg = { "csiphy1" },
+ .interrupt = { "csiphy1" },
+ .csiphy = {
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY2 */
+ {
+ .regulators = {},
+ .clock = {
+ "csiphy2",
+ "csiphy2_timer"
+ },
+ .clock_rate = {
+ { 150000000, 270000000, 360000000 },
+ { 300000000 },
+ },
+ .reg = { "csiphy2" },
+ .interrupt = { "csiphy2" },
+ .csiphy = {
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY3 */
+ {
+ .regulators = {},
+ .clock = {
+ "csiphy3",
+ "csiphy3_timer"
+ },
+ .clock_rate = {
+ { 150000000, 270000000, 360000000 },
+ { 300000000 },
+ },
+ .reg = { "csiphy3" },
+ .interrupt = { "csiphy3" },
+ .csiphy = {
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ }
+};
+
+static const struct camss_subdev_resources csid_res_7180[] = {
+ /* CSID0 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = {
+ "soc_ahb",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "csi0"
+ },
+ .clock_rate = {
+ { 0 },
+ { 240000000, 360000000, 432000000, 600000000 },
+ { 150000000, 270000000, 360000000 },
+ { 150000000, 270000000, 360000000, 480000000 },
+ },
+ .reg = { "csid0" },
+ .interrupt = { "csid0" },
+ .csid = {
+ .hw_ops = &csid_ops_gen2,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID1 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = {
+ "soc_ahb",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "csi1",
+ },
+ .clock_rate = {
+ { 0 },
+ { 240000000, 360000000, 432000000, 600000000 },
+ { 150000000, 270000000, 360000000 },
+ { 150000000, 270000000, 360000000, 480000000 },
+ },
+ .reg = { "csid1" },
+ .interrupt = { "csid1" },
+ .csid = {
+ .hw_ops = &csid_ops_gen2,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID2 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = {
+ "soc_ahb",
+ "vfe_lite",
+ "vfe_lite_cphy_rx",
+ "csi2",
+ },
+ .clock_rate = {
+ { 0 },
+ { 240000000, 360000000, 432000000, 600000000 },
+ { 150000000, 270000000, 360000000 },
+ { 150000000, 270000000, 360000000, 480000000 },
+ },
+ .reg = { "csid2" },
+ .interrupt = { "csid2" },
+ .csid = {
+ .is_lite = true,
+ .hw_ops = &csid_ops_gen2,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .formats = &csid_formats_gen2
+ }
+ }
+};
+
+static const struct camss_subdev_resources vfe_res_7180[] = {
+ /* VFE0 */
+ {
+ .regulators = {},
+ .clock = {
+ "camnoc_axi",
+ "cpas_ahb",
+ "soc_ahb",
+ "vfe0",
+ "vfe0_axi",
+ "csi0",
+ },
+ .clock_rate = {
+ { 0 },
+ { 0 },
+ { 0 },
+ { 19200000, 240000000, 360000000, 432000000, 600000000 },
+ { 0 },
+ { 150000000, 270000000, 360000000, 480000000 },
+ },
+ .reg = { "vfe0" },
+ .interrupt = { "vfe0" },
+ .vfe = {
+ .line_num = 4,
+ .has_pd = true,
+ .pd_name = "ife0",
+ .hw_ops = &vfe_ops_170,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE1 */
+ {
+ .regulators = {},
+ .clock = {
+ "camnoc_axi",
+ "cpas_ahb",
+ "soc_ahb",
+ "vfe1",
+ "vfe1_axi",
+ "csi1",
+ },
+ .clock_rate = {
+ { 0 },
+ { 0 },
+ { 0 },
+ { 19200000, 240000000, 360000000, 432000000, 600000000 },
+ { 0 },
+ { 150000000, 270000000, 360000000, 480000000 },
+ },
+ .reg = { "vfe1" },
+ .interrupt = { "vfe1" },
+ .vfe = {
+ .line_num = 4,
+ .has_pd = true,
+ .pd_name = "ife1",
+ .hw_ops = &vfe_ops_170,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE-lite */
+ {
+ .regulators = {},
+ .clock = {
+ "camnoc_axi",
+ "cpas_ahb",
+ "soc_ahb",
+ "vfe_lite",
+ "csi2",
+ },
+ .clock_rate = {
+ { 0 },
+ { 0 },
+ { 0 },
+ { 19200000, 240000000, 360000000, 432000000, 600000000 },
+ { 150000000, 270000000, 360000000, 480000000 },
+ },
+ .reg = { "vfe_lite" },
+ .interrupt = { "vfe_lite" },
+ .vfe = {
+ .is_lite = true,
+ .line_num = 4,
+ .hw_ops = &vfe_ops_170,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ }
+};
+
static const struct camss_subdev_resources csiphy_res_8250[] = {
/* CSIPHY0 */
{
@@ -2411,6 +2649,18 @@ static const struct camss_resources sdm845_resources = {
.link_entities = camss_link_entities
};
+static const struct camss_resources sc7180_resources = {
+ .version = CAMSS_7180,
+ .pd_name = "top",
+ .csiphy_res = csiphy_res_7180,
+ .csid_res = csid_res_7180,
+ .vfe_res = vfe_res_7180,
+ .csiphy_num = ARRAY_SIZE(csiphy_res_7180),
+ .csid_num = ARRAY_SIZE(csid_res_7180),
+ .vfe_num = ARRAY_SIZE(vfe_res_7180),
+ .link_entities = camss_link_entities
+};
+
static const struct camss_resources sm8250_resources = {
.version = CAMSS_8250,
.pd_name = "top",
@@ -2445,6 +2695,7 @@ static const struct of_device_id camss_dt_match[] = {
{ .compatible = "qcom,msm8996-camss", .data = &msm8996_resources },
{ .compatible = "qcom,sdm660-camss", .data = &sdm660_resources },
{ .compatible = "qcom,sdm845-camss", .data = &sdm845_resources },
+ { .compatible = "qcom,sc7180-camss", .data = &sc7180_resources },
{ .compatible = "qcom,sm8250-camss", .data = &sm8250_resources },
{ .compatible = "qcom,sc8280xp-camss", .data = &sc8280xp_resources },
{ }
--
2.34.1
next prev parent reply other threads:[~2024-06-24 12:13 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-24 12:13 [PATCH RFT v3 0/5] Add sc7180 camss subsys support George Chan via B4 Relay
2024-06-24 12:13 ` [PATCH RFT v3 1/5] dt-bindings: media: camss: Add qcom,sc7180-camss George Chan via B4 Relay
2024-06-25 23:32 ` Bryan O'Donoghue
2024-06-26 5:46 ` george chan
2024-06-26 6:11 ` Krzysztof Kozlowski
2024-06-26 6:46 ` george chan
2024-06-26 7:15 ` Krzysztof Kozlowski
2024-06-26 8:17 ` george chan
2024-06-26 8:38 ` george chan
2024-06-26 8:57 ` Krzysztof Kozlowski
2024-06-26 9:04 ` george chan
2024-06-27 15:40 ` Bryan O'Donoghue
2024-06-28 19:16 ` george chan
2024-06-26 9:17 ` Dmitry Baryshkov
2024-06-26 8:56 ` Krzysztof Kozlowski
2024-06-24 12:13 ` [PATCH RFT v3 2/5] media: camss: csiphy-3ph: Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init George Chan via B4 Relay
2024-06-25 23:34 ` Bryan O'Donoghue
2024-06-28 9:41 ` Bryan O'Donoghue
2024-06-24 12:13 ` [PATCH RFT v3 3/5] media: qcom: camss: Add sc7180 support George Chan via B4 Relay
2024-06-25 23:34 ` Bryan O'Donoghue
2024-06-24 12:13 ` George Chan via B4 Relay [this message]
2024-06-25 23:39 ` [PATCH RFT v3 4/5] media: qcom: camss: Add sc7180 resources Bryan O'Donoghue
2024-06-24 12:13 ` [PATCH RFT v3 5/5] arm64: dts: qcom: sc7180: camss: Add CAMSS block definition George Chan via B4 Relay
2024-06-25 23:49 ` Bryan O'Donoghue
2024-06-25 23:52 ` Bryan O'Donoghue
2024-06-26 5:53 ` george chan
2024-06-26 10:50 ` george chan
2024-06-24 13:50 ` [PATCH RFT v3 0/5] Add sc7180 camss subsys support Bryan O'Donoghue
2024-06-24 15:03 ` george chan
2024-06-25 16:57 ` Konrad Dybcio
2024-06-25 23:45 ` Bryan O'Donoghue
2024-06-26 5:49 ` george chan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240624-b4-sc7180-camss-v3-4-89ece6471431@gmail.com \
--to=devnull+gchan9527.gmail.com@kernel.org \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=gchan9527@gmail.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=todor.too@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).