From: Conor Dooley <conor@kernel.org>
To: Prabhakar <prabhakar.csengg@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Magnus Damm <magnus.damm@gmail.com>,
linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Biju Das <biju.das.jz@bp.renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH v3 1/3] dt-bindings: mmc: renesas,sdhi: Document RZ/V2H(P) support
Date: Mon, 24 Jun 2024 17:39:09 +0100 [thread overview]
Message-ID: <20240624-request-demeanor-d66965d27935@spud> (raw)
In-Reply-To: <20240624153229.68882-2-prabhakar.mahadev-lad.rj@bp.renesas.com>
[-- Attachment #1: Type: text/plain, Size: 3532 bytes --]
On Mon, Jun 24, 2024 at 04:32:27PM +0100, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> The SD/MMC block on the RZ/V2H(P) ("R9A09G057") SoC is similar to that
> of the R-Car Gen3, but it has some differences:
> - HS400 is not supported.
> - It supports the SD_IOVS bit to control the IO voltage level.
> - It supports fixed address mode.
>
> To accommodate these differences, a SoC-specific 'renesas,sdhi-r9a09g057'
> compatible string is added.
>
> A 'vqmmc-regulator' object is introduced to handle the power enable (PWEN)
> and voltage level switching for the SD/MMC.
>
> Additionally, the 'renesas,sdhi-use-internal-regulator' flag is introduced
> to indicate that an internal regulator is used instead of a
> GPIO-controlled regulator. This flag will help configure the internal
> regulator and avoid special handling when GPIO is used for voltage
> regulation instead of the SD_(IOVS/PWEN) pins.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v2->v3
> - Renamed vqmmc-r9a09g057-regulator object to vqmmc-regulator
> - Added regulator-compatible property for vqmmc-regulator
> - Added 'renesas,sdhi-use-internal-regulator' property
>
> v1->v2
> - Moved vqmmc object in the if block
> - Updated commit message
> ---
> .../devicetree/bindings/mmc/renesas,sdhi.yaml | 30 ++++++++++++++++++-
> 1 file changed, 29 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> index 3d0e61e59856..20769434a422 100644
> --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> @@ -18,6 +18,7 @@ properties:
> - renesas,sdhi-r7s9210 # SH-Mobile AG5
> - renesas,sdhi-r8a73a4 # R-Mobile APE6
> - renesas,sdhi-r8a7740 # R-Mobile A1
> + - renesas,sdhi-r9a09g057 # RZ/V2H(P)
> - renesas,sdhi-sh73a0 # R-Mobile APE6
> - items:
> - enum:
> @@ -118,7 +119,9 @@ allOf:
> properties:
> compatible:
> contains:
> - const: renesas,rzg2l-sdhi
> + enum:
> + - renesas,sdhi-r9a09g057
> + - renesas,rzg2l-sdhi
> then:
> properties:
> clocks:
> @@ -204,6 +207,31 @@ allOf:
> sectioned off to be run by a separate second clock source to allow
> the main core clock to be turned off to save power.
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: renesas,sdhi-r9a09g057
> + then:
> + properties:
Please define properties at the top level and constrain then per
compatible.
Thanks,
Conor.
> + renesas,sdhi-use-internal-regulator:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + Flag to indicate internal regulator is being used instead of GPIO regulator.
> +
> + vqmmc-regulator:
> + type: object
> + description: VQMMC SD regulator
> + $ref: /schemas/regulator/regulator.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + regulator-compatible:
> + pattern: "^vqmmc-r9a09g057-regulator"
> +
> + required:
> + - vqmmc-regulator
> +
> required:
> - compatible
> - reg
> --
> 2.34.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2024-06-24 16:39 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-24 15:32 [PATCH v3 0/3] Add SD/MMC support for Renesas RZ/V2H(P) SoC Prabhakar
2024-06-24 15:32 ` [PATCH v3 1/3] dt-bindings: mmc: renesas,sdhi: Document RZ/V2H(P) support Prabhakar
2024-06-24 16:39 ` Conor Dooley [this message]
2024-06-24 17:26 ` Lad, Prabhakar
2024-06-25 6:57 ` Geert Uytterhoeven
2024-06-25 8:46 ` Lad, Prabhakar
2024-06-25 9:02 ` Geert Uytterhoeven
2024-06-25 9:07 ` Lad, Prabhakar
2024-06-25 9:12 ` Biju Das
2024-06-25 9:19 ` Lad, Prabhakar
2024-06-25 9:47 ` Biju Das
2024-06-25 10:35 ` Lad, Prabhakar
2024-06-24 15:32 ` [PATCH v3 2/3] mmc: tmio: Use MMC core APIs to control the vqmmc regulator Prabhakar
2024-06-26 7:45 ` claudiu beznea
2024-06-24 15:32 ` [PATCH v3 3/3] mmc: renesas_sdhi: Add support for RZ/V2H(P) SoC Prabhakar
2024-06-26 7:49 ` claudiu beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240624-request-demeanor-d66965d27935@spud \
--to=conor@kernel.org \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fabrizio.castro.jz@renesas.com \
--cc=geert+renesas@glider.be \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.csengg@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).