From: Chris Packham <chris.packham@alliedtelesis.co.nz>
To: tglx@linutronix.de, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, tsbogend@alpha.franken.de,
daniel.lezcano@linaro.org, paulburton@kernel.org,
peterz@infradead.org, mail@birger-koblitz.de, bert@biot.com,
john@phrozen.org, sander@svanheule.net
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-mips@vger.kernel.org, kabel@kernel.org,
ericwouds@gmail.com,
Chris Packham <chris.packham@alliedtelesis.co.nz>
Subject: [PATCH v2 0/8] mips: Support for RTL9302C
Date: Mon, 24 Jun 2024 13:22:52 +1200 [thread overview]
Message-ID: <20240624012300.1713290-1-chris.packham@alliedtelesis.co.nz> (raw)
This series adds basic support for the RTL9302C reference board. Currently the
focus is on the CPU block stuff. I hope to get around to the DSA switch driver
eventually but this is a small start that lets me boot a mainline kernel on the
board I have. I initialiy started with code from openwrt but have paired it
down to just the clocksource driver and devicetree.
The first two patches in this series are fixing some complaints from make
dtbs_check for some existing realtek dts files. They can be applied on their
own if desired.
Chris Packham (8):
mips: dts: realtek: use "serial" instead of "uart" in node name
mips: dts: realtek: add device_type property to cpu node
dt-bindings: mips: realtek: Add rtl930x-soc compatible
dt-bindings: timer: Add schema for realtek,otto-timer
dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc
clocksource: realtek: Add timer driver for rtl-otto platforms
mips: generic: add fdt fixup for Realtek reference board
mips: dts: realtek: Add RTL9302C board
.../realtek,rtl-intc.yaml | 17 +-
.../devicetree/bindings/mips/realtek-rtl.yaml | 4 +
.../bindings/timer/realtek,otto-timer.yaml | 66 ++++
arch/mips/boot/dts/realtek/Makefile | 1 +
arch/mips/boot/dts/realtek/rtl838x.dtsi | 1 +
arch/mips/boot/dts/realtek/rtl83xx.dtsi | 4 +-
arch/mips/boot/dts/realtek/rtl9302c.dts | 73 +++++
arch/mips/boot/dts/realtek/rtl930x.dtsi | 79 +++++
arch/mips/generic/Makefile | 1 +
arch/mips/generic/board-realtek.c | 81 +++++
drivers/clocksource/Kconfig | 11 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-rtl-otto.c | 287 ++++++++++++++++++
include/linux/cpuhotplug.h | 1 +
14 files changed, 624 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/realtek,otto-timer.yaml
create mode 100644 arch/mips/boot/dts/realtek/rtl9302c.dts
create mode 100644 arch/mips/boot/dts/realtek/rtl930x.dtsi
create mode 100644 arch/mips/generic/board-realtek.c
create mode 100644 drivers/clocksource/timer-rtl-otto.c
--
2.45.2
next reply other threads:[~2024-06-24 1:23 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-24 1:22 Chris Packham [this message]
2024-06-24 1:22 ` [PATCH v2 1/8] mips: dts: realtek: use "serial" instead of "uart" in node name Chris Packham
2024-06-24 1:22 ` [PATCH v2 2/8] mips: dts: realtek: add device_type property to cpu node Chris Packham
2024-06-24 1:22 ` [PATCH v2 3/8] dt-bindings: mips: realtek: Add rtl930x-soc compatible Chris Packham
2024-06-24 4:48 ` Krzysztof Kozlowski
2024-06-24 5:00 ` Chris Packham
2024-06-26 7:12 ` Krzysztof Kozlowski
2024-06-26 21:01 ` Chris Packham
2024-06-27 6:59 ` Krzysztof Kozlowski
2024-06-24 1:22 ` [PATCH v2 4/8] dt-bindings: timer: Add schema for realtek,otto-timer Chris Packham
2024-06-24 4:49 ` Krzysztof Kozlowski
2024-06-24 5:21 ` Chris Packham
2024-06-26 7:13 ` Krzysztof Kozlowski
2024-06-26 21:07 ` Chris Packham
2024-06-24 1:22 ` [PATCH v2 5/8] dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc Chris Packham
2024-06-24 4:50 ` Krzysztof Kozlowski
2024-06-24 1:22 ` [PATCH v2 6/8] clocksource: realtek: Add timer driver for rtl-otto platforms Chris Packham
2024-06-26 21:22 ` kernel test robot
2024-06-24 1:22 ` [PATCH v2 7/8] mips: generic: add fdt fixup for Realtek reference board Chris Packham
2024-06-24 1:23 ` [PATCH v2 8/8] mips: dts: realtek: Add RTL9302C board Chris Packham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240624012300.1713290-1-chris.packham@alliedtelesis.co.nz \
--to=chris.packham@alliedtelesis.co.nz \
--cc=bert@biot.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=ericwouds@gmail.com \
--cc=john@phrozen.org \
--cc=kabel@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mail@birger-koblitz.de \
--cc=paulburton@kernel.org \
--cc=peterz@infradead.org \
--cc=robh@kernel.org \
--cc=sander@svanheule.net \
--cc=tglx@linutronix.de \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).