Re: [PATCH 3/3] dt-bindings: display: panel: correct Anbernic RG35XX panel example

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 1135 bytes --]

On Wed, Jun 26, 2024 at 11:17:50PM +1200, Ryan Walklin wrote:
> make dt_bindings_check reports that sck-gpios and num-chipselects are
> required for spi nodes, therefore add these to the example.
> 
> Signed-off-by: Ryan Walklin <ryan@testtoast.com>

huh, are you sure it does? It doesn't for me...

> ---
>  .../bindings/display/panel/anbernic,rg35xx-panel.yaml          | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/anbernic,rg35xx-panel.yaml b/Documentation/devicetree/bindings/display/panel/anbernic,rg35xx-panel.yaml
> index a7d5ad0f29389..610601c1594f3 100644
> --- a/Documentation/devicetree/bindings/display/panel/anbernic,rg35xx-panel.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/anbernic,rg35xx-panel.yaml
> @@ -40,6 +40,9 @@ examples:
>          #address-cells = <1>;
>          #size-cells = <0>;
> 
> +        sck-gpios = <&pio 8 9 GPIO_ACTIVE_HIGH>; // PI9
> +        num-chipselects = <1>;
> +
>          panel@0 {
>              compatible = "anbernic,rg35xx-panel";
>              reg = <0>;
> -- 
> 2.45.2
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]