[PATCH 6/6] arm64: dts: x1e80100-qcp: fix wsa soundwire port mapping

[Srinivas Kandagatla <srinivas.kandagatla@linaro.org>]

Existing way of allocating ports dynamically is linear starting from 1 to
MAX_PORTS. This will not work for x1e80100 as the master ports are
are not mapped in the same order.

Without this fix only one speaker in a pair of speakers will function.

After this fix along with WSA codec changes both the speakers starts
working.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 4edec3212dde..79563ae34890 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -749,6 +749,7 @@ left_spkr: speaker@0,0 {
 		sound-name-prefix = "SpkrLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
 	};
 
 	/* WSA8845, Right Speaker */
@@ -760,6 +761,7 @@ right_spkr: speaker@0,1 {
 		sound-name-prefix = "SpkrRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
 	};
 };
 

-- 
2.25.1