From: Jayesh Choudhary <j-choudhary@ti.com>
To: <linux-kernel@vger.kernel.org>, <nm@ti.com>, <vigneshr@ti.com>,
<j-luthra@ti.com>, <j-choudhary@ti.com>
Cc: <kristo@kernel.org>, <robh@kernel.org>, <krzk+dt@kernel.org>,
<conor+dt@kernel.org>, <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <u-kumar1@ti.com>
Subject: [PATCH v2 1/3] arm64: dts: ti: k3-j784s4-main: Add McASP nodes
Date: Wed, 26 Jun 2024 15:46:43 +0530 [thread overview]
Message-ID: <20240626101645.36764-2-j-choudhary@ti.com> (raw)
In-Reply-To: <20240626101645.36764-1-j-choudhary@ti.com>
Add McASP 0-4 instances and keep them disabled because several
required properties are missing as they are board specific.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 90 ++++++++++++++++++++++
1 file changed, 90 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index a3e91ff87b4a..7e10be314684 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -2683,4 +2683,94 @@ dss_ports: ports {
*/
};
};
+
+ mcasp0: mcasp@2b00000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x00 0x02b00000 0x00 0x2000>,
+ <0x00 0x02b08000 0x00 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+ dma-names = "tx", "rx";
+ clocks = <&k3_clks 265 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 265 0>;
+ assigned-clock-parents = <&k3_clks 265 1>;
+ power-domains = <&k3_pds 265 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ mcasp1: mcasp@2b10000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x00 0x02b10000 0x00 0x2000>,
+ <0x00 0x02b18000 0x00 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+ dma-names = "tx", "rx";
+ clocks = <&k3_clks 266 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 266 0>;
+ assigned-clock-parents = <&k3_clks 266 1>;
+ power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@2b20000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x00 0x02b20000 0x00 0x2000>,
+ <0x00 0x02b28000 0x00 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+ dma-names = "tx", "rx";
+ clocks = <&k3_clks 267 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 267 0>;
+ assigned-clock-parents = <&k3_clks 267 1>;
+ power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ mcasp3: mcasp@2b30000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x00 0x02b30000 0x00 0x2000>,
+ <0x00 0x02b38000 0x00 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+ dma-names = "tx", "rx";
+ clocks = <&k3_clks 268 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 268 0>;
+ assigned-clock-parents = <&k3_clks 268 1>;
+ power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ mcasp4: mcasp@2b40000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x00 0x02b40000 0x00 0x2000>,
+ <0x00 0x02b48000 0x00 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
+ dma-names = "tx", "rx";
+ clocks = <&k3_clks 269 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 269 0>;
+ assigned-clock-parents = <&k3_clks 269 1>;
+ power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
};
--
2.25.1
next prev parent reply other threads:[~2024-06-26 10:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-26 10:16 [PATCH v2 0/3] Enable audio for J784S4-EVM platform Jayesh Choudhary
2024-06-26 10:16 ` Jayesh Choudhary [this message]
2024-06-26 10:16 ` [PATCH v2 2/3] arm64: dts: ti: k3-j784s4-main: Add audio_refclk node Jayesh Choudhary
2024-06-26 10:16 ` [PATCH v2 3/3] arm64: dts: ti: k3-j784s4-evm: Enable analog audio support Jayesh Choudhary
2024-07-04 7:55 ` [PATCH v2 0/3] Enable audio for J784S4-EVM platform Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240626101645.36764-2-j-choudhary@ti.com \
--to=j-choudhary@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=j-luthra@ti.com \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).