From: Bjorn Helgaas <helgaas@kernel.org>
To: Stanimir Varbanov <svarbanov@suse.de>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rpi-kernel@lists.infradead.org, linux-pci@vger.kernel.org,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Florian Fainelli <florian.fainelli@broadcom.com>,
Jim Quinlan <jim2101024@gmail.com>,
Nicolas Saenz Julienne <nsaenz@kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Lorenzo Pieralisi <lpieralisi@kernel.org>,
kw@linux.com, Philipp Zabel <p.zabel@pengutronix.de>,
Andrea della Porta <andrea.porta@suse.com>,
Phil Elwell <phil@raspberrypi.com>,
Jonathan Bell <jonathan@raspberrypi.com>
Subject: Re: [PATCH 5/7] PCI: brcmstb: add phy_controllable flag
Date: Wed, 26 Jun 2024 10:27:12 -0500 [thread overview]
Message-ID: <20240626152712.GA1467478@bhelgaas> (raw)
In-Reply-To: <20240626104544.14233-6-svarbanov@suse.de>
Match the capitalization of the subject line, s/add/Add/ as in
previous patch.
On Wed, Jun 26, 2024 at 01:45:42PM +0300, Stanimir Varbanov wrote:
> Not all PCIe can control the phy block, add a flag
> in config structure to take that fact into account.
>
> Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
> ---
> drivers/pci/controller/pcie-brcmstb.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index 4ca509502336..ff8e5e672ff0 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -224,6 +224,7 @@ enum pcie_type {
> struct pcie_cfg_data {
> const int *offsets;
> const enum pcie_type type;
> + bool phy_controllable;
> void (*perst_set)(struct brcm_pcie *pcie, u32 val);
> void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
> };
> @@ -1301,11 +1302,17 @@ static int brcm_phy_cntl(struct brcm_pcie *pcie, const int start)
>
> static inline int brcm_phy_start(struct brcm_pcie *pcie)
> {
> + if (!pcie->cfg->phy_controllable)
> + return 0;
> +
> return pcie->rescal ? brcm_phy_cntl(pcie, 1) : 0;
> }
>
> static inline int brcm_phy_stop(struct brcm_pcie *pcie)
> {
> + if (!pcie->cfg->phy_controllable)
> + return 0;
> +
> return pcie->rescal ? brcm_phy_cntl(pcie, 0) : 0;
> }
>
> @@ -1498,6 +1505,7 @@ static const int pcie_offsets_bmips_7425[] = {
> static const struct pcie_cfg_data generic_cfg = {
> .offsets = pcie_offsets,
> .type = GENERIC,
> + .phy_controllable = true,
> .perst_set = brcm_pcie_perst_set_generic,
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> };
> @@ -1505,6 +1513,7 @@ static const struct pcie_cfg_data generic_cfg = {
> static const struct pcie_cfg_data bcm7425_cfg = {
> .offsets = pcie_offsets_bmips_7425,
> .type = BCM7425,
> + .phy_controllable = true,
> .perst_set = brcm_pcie_perst_set_generic,
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> };
> @@ -1512,6 +1521,7 @@ static const struct pcie_cfg_data bcm7425_cfg = {
> static const struct pcie_cfg_data bcm7435_cfg = {
> .offsets = pcie_offsets,
> .type = BCM7435,
> + .phy_controllable = true,
> .perst_set = brcm_pcie_perst_set_generic,
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> };
> @@ -1519,6 +1529,7 @@ static const struct pcie_cfg_data bcm7435_cfg = {
> static const struct pcie_cfg_data bcm4908_cfg = {
> .offsets = pcie_offsets,
> .type = BCM4908,
> + .phy_controllable = true,
> .perst_set = brcm_pcie_perst_set_4908,
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> };
> @@ -1532,6 +1543,7 @@ static const int pcie_offset_bcm7278[] = {
> static const struct pcie_cfg_data bcm7278_cfg = {
> .offsets = pcie_offset_bcm7278,
> .type = BCM7278,
> + .phy_controllable = true,
> .perst_set = brcm_pcie_perst_set_7278,
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278,
> };
> @@ -1539,6 +1551,7 @@ static const struct pcie_cfg_data bcm7278_cfg = {
> static const struct pcie_cfg_data bcm2711_cfg = {
> .offsets = pcie_offsets,
> .type = BCM2711,
> + .phy_controllable = true,
> .perst_set = brcm_pcie_perst_set_generic,
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> };
> --
> 2.43.0
>
next prev parent reply other threads:[~2024-06-26 15:27 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-26 10:45 [PATCH 0/7] Add PCIe support for bcm2712 Stanimir Varbanov
2024-06-26 10:45 ` [PATCH 1/7] dt-bindings: interrupt-controller: Add bcm2712 MSI-X DT bindings Stanimir Varbanov
2024-06-26 11:31 ` Florian Fainelli
2024-07-02 9:39 ` Stanimir Varbanov
2024-06-26 11:35 ` Florian Fainelli
2024-07-02 9:58 ` Stanimir Varbanov
2024-06-28 22:05 ` Rob Herring
2024-07-19 16:22 ` Stanimir Varbanov
2024-06-26 10:45 ` [PATCH 2/7] dt-bindings: PCI: brcmstb: Update bindings for PCIe on bcm2712 Stanimir Varbanov
2024-06-28 22:06 ` Rob Herring (Arm)
2024-06-26 10:45 ` [PATCH 3/7] irqchip: Add Broadcom bcm2712 MSI-X interrupt controller Stanimir Varbanov
2024-06-27 12:12 ` Thomas Gleixner
2024-07-18 15:54 ` Stanimir Varbanov
2024-06-26 10:45 ` [PATCH 4/7] PCI: brcmstb: Reuse config structure Stanimir Varbanov
2024-06-26 10:45 ` [PATCH 5/7] PCI: brcmstb: add phy_controllable flag Stanimir Varbanov
2024-06-26 15:27 ` Bjorn Helgaas [this message]
2024-06-26 10:45 ` [PATCH 6/7] PCI: brcmstb: Add bcm2712 support Stanimir Varbanov
2024-06-26 10:45 ` [PATCH 7/7] arm64: dts: broadcom: bcm2712: Add PCIe DT nodes Stanimir Varbanov
2024-06-26 11:28 ` Florian Fainelli
2024-06-26 11:31 ` [PATCH 0/7] Add PCIe support for bcm2712 Florian Fainelli
2024-07-02 10:05 ` Stanimir Varbanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240626152712.GA1467478@bhelgaas \
--to=helgaas@kernel.org \
--cc=andrea.porta@suse.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=florian.fainelli@broadcom.com \
--cc=jim2101024@gmail.com \
--cc=jonathan@raspberrypi.com \
--cc=krzk+dt@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=nsaenz@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=phil@raspberrypi.com \
--cc=robh@kernel.org \
--cc=svarbanov@suse.de \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).