[PATCH v2 01/13] arm64: dts: layerscape: rename node 'timer' as 'rtc'

[PATCH v2 01/13] arm64: dts: layerscape: rename node 'timer' as 'rtc'

[Frank Li]

ftm_alarm is rtc. Correct the name as 'rtc' to fix DTB_CHECK warning.

timer@29d0000: $nodename:0: 'timer@29d0000' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$'
        from schema $id: http://devicetree.org/schemas/rtc/fsl,ls-ftm-alarm.yaml

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 4 ++--
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 2 +-
 7 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index b6824d6bc9391..2e1cddc11bf47 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -564,7 +564,7 @@ rcpm: power-controller@1ee2140 {
 			#fsl,rcpm-wakeup-cells = <1>;
 		};
 
-		ftm_alarm0: timer@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1012a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x20000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 744ed5feb8f0b..4188faa59368e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1326,7 +1326,7 @@ rcpm: power-controller@1e34040 {
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,ls1028a-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
@@ -1334,7 +1334,7 @@ ftm_alarm0: timer@2800000 {
 			status = "disabled";
 		};
 
-		ftm_alarm1: timer@2810000 {
+		ftm_alarm1: rtc@2810000 {
 			compatible = "fsl,ls1028a-ftm-alarm";
 			reg = <0x0 0x2810000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 534b832440207..caf765593547b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -990,7 +990,7 @@ rcpm: power-controller@1ee2140 {
 			#fsl,rcpm-wakeup-cells = <1>;
 		};
 
-		ftm_alarm0: timer@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1043a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x20000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 30061c80f1cc1..f8c9489507e7a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -940,7 +940,7 @@ rcpm: power-controller@1ee2140 {
 			#fsl,rcpm-wakeup-cells = <1>;
 		};
 
-		ftm_alarm0: timer@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1046a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x20000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 01c2c2b474205..81b80b6b27d31 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -1041,7 +1041,7 @@ rcpm: power-controller@1e34040 {
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,ls1088a-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 89a5f4d05a7b5..dac33a3eab841 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -1226,7 +1226,7 @@ rcpm: power-controller@1e34040 {
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,ls208xa-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 58c3a3a9744d6..40159f58c6f94 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1086,7 +1086,7 @@ rcpm: power-controller@1e34040 {
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,lx2160a-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
-- 
2.34.1

[PATCH v2 02/13] arm64: dts: layerscape: add platform special compatible string for gpio

[Frank Li]

Add platform special compatible string for all gpio controller to fix
below warning.

 gpio@2300000: compatible: 'oneOf' conditional failed, one must be fixed:
        ['fsl,qoriq-gpio'] is too short
        'fsl,qoriq-gpio' is not one of ['fsl,mpc5121-gpio', 'fsl,mpc5125-gpio', 'fsl,mpc8349-gpio', 'fsl,mpc8572-gpio', 'fsl,mpc8610-gpio', 'fsl,pq3-gpio']
        'fsl,qoriq-gpio' is not one of ['fsl,ls1021a-gpio', 'fsl,ls1028a-gpio', 'fsl,ls1043a-gpio', 'fsl,ls1088a-gpio', 'fsl,ls2080a-gpio']

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 4 ++--
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 8 ++++----
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 8 ++++----
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 2e1cddc11bf47..1b6ab9550cce9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -407,7 +407,7 @@ duart1: serial@21c0600 {
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -417,7 +417,7 @@ gpio0: gpio@2300000 {
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index f8c9489507e7a..524b44f424272 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -589,7 +589,7 @@ duart3: serial@21d0600 {
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -599,7 +599,7 @@ gpio0: gpio@2300000 {
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -609,7 +609,7 @@ gpio1: gpio@2310000 {
 		};
 
 		gpio2: gpio@2320000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -619,7 +619,7 @@ gpio2: gpio@2320000 {
 		};
 
 		gpio3: gpio@2330000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
 			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 40159f58c6f94..da49f274e9d5a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1027,7 +1027,7 @@ QORIQ_CLK_PLL_DIV(8)>,
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -1038,7 +1038,7 @@ gpio0: gpio@2300000 {
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -1049,7 +1049,7 @@ gpio1: gpio@2310000 {
 		};
 
 		gpio2: gpio@2320000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -1060,7 +1060,7 @@ gpio2: gpio@2320000 {
 		};
 
 		gpio3: gpio@2330000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
-- 
2.34.1

[PATCH v2 03/13] arm64: dts: fsl-lx2160a: fix #address-cells for pinctrl-single

[Frank Li]

Change #addres-cells to 1 and #size-cells to 0 to align binding doc
requiremement.

Fix below warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dtb: pinmux@70010012c: #address-cells:0:0: 1 was expected
	from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml#

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index da49f274e9d5a..12b6ec4926456 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1703,8 +1703,8 @@ pcs18: ethernet-phy@0 {
 		pinmux_i2crv: pinmux@70010012c {
 			compatible = "pinctrl-single";
 			reg = <0x00000007 0x0010012c 0x0 0xc>;
-			#address-cells = <2>;
-			#size-cells = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			pinctrl-single,bit-per-mux;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <0x7>;
-- 
2.34.1

[PATCH v2 04/13] arm64: dts: fsl-ls1012a: remove property 'snps,host-vbus-glitches'

[Frank Li]

Workaround already applied unconditional at
commit a6ba1e453174 ("usb: dwc3: apply snps,host-vbus-glitches workaround unconditionally")

Remove it to fix CHECK_DTBS warning:
	usb@2f00000: Unevaluated properties are not allowed ('snps,host-vbus-glitches' was unexpected)

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 1b6ab9550cce9..64e14154d5969 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -501,7 +501,6 @@ usb0: usb@2f00000 {
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-			snps,host-vbus-glitches;
 		};
 
 		sata: sata@3200000 {
-- 
2.34.1

[PATCH v2 05/13] arm64: dts: layerscape: replace node name 'nor' with 'flash'

[Frank Li]

Replace node name 'nor' with 'flash' to fix below CHECK_DTBS warning.
nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts  | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts  | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts  | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts  | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index dda27ed7aaf2b..11b1356e95d5b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -64,7 +64,7 @@ &ifc {
 		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
 		big-endian;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 26f8540cb101b..5f6e57cf91981 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -71,7 +71,7 @@ &ifc {
 		  0x1 0x0 0x0 0x7e800000 0x00010000
 		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 
-		nor@0,0 {
+		flash@0,0 {
 			compatible = "cfi-flash";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index 3b0ed9305f2bd..e5296e51f656f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -151,7 +151,7 @@ &ifc {
 		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
 		big-endian;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index aa52ff73ff9e0..d238a8440a814 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -113,7 +113,7 @@ &ifc {
 		  3 0 0x5 0x20000000 0x00010000>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
 		bank-width = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index e2c94da6d6e82..9178cd61c7869 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -43,7 +43,7 @@ &ifc {
 		  0x2 0x0 0x5 0x30000000 0x00010000
 		  0x3 0x0 0x5 0x20000000 0x00010000>;
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 537cecb13dd08..69cd05a30b853 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -21,7 +21,7 @@ &ifc {
 		  0x2 0x0 0x5 0x30000000 0x00010000
 		  0x3 0x0 0x5 0x20000000 0x00010000>;
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
-- 
2.34.1

[PATCH v2 06/13] arm64: dts: layerscape: remove compatible string 'fsl,fman-xmdio' for fman3

[Frank Li]

Fman3 should use 'fsl,fman-memac-mdio'. 'fsl,fman-xmdio' is for fman2.
Fix below CHECK_DTBS warning.
fman@1a00000: mdio@eb000:compatible: ['fsl,fman-memac-mdio', 'fsl,fman-xmdio'] is too long

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi  | 2 +-
 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi  | 2 +-
 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi  | 2 +-
 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi  | 2 +-
 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi  | 2 +-
 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi  | 2 +-
 arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi       | 4 ++--
 9 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
index dbd2fc3ba790e..65f7b5a50eb51 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -32,7 +32,7 @@ ethernet@f0000 {
 	mdio@f1000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xf1000 0x1000>;
 
 		pcsphy6: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
index 6fc5d25600571..3f70482c98c30 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -32,7 +32,7 @@ ethernet@f2000 {
 	mdio@f3000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xf3000 0x1000>;
 
 		pcsphy7: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
index 4e02276fcf993..78841c1f32527 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -31,7 +31,7 @@ ethernet@e0000 {
 	mdio@e1000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe1000 0x1000>;
 
 		pcsphy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
index 0312fa43fa777..1f43fa6662221 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -31,7 +31,7 @@ ethernet@e2000 {
 	mdio@e3000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe3000 0x1000>;
 
 		pcsphy1: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
index af2df07971dd9..de0aa017701dd 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -31,7 +31,7 @@ ethernet@e4000 {
 	mdio@e5000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe5000 0x1000>;
 
 		pcsphy2: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
index 4ac98dc8b2279..6904aa5d8e547 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -31,7 +31,7 @@ ethernet@e6000 {
 	mdio@e7000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe7000 0x1000>;
 
 		pcsphy3: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
index bd932d8b0160b..a3d29d470297e 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -31,7 +31,7 @@ ethernet@e8000 {
 	mdio@e9000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe9000 0x1000>;
 
 		pcsphy4: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
index 7de1c5203f3e2..01b78c0463a74 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -31,7 +31,7 @@ ethernet@ea000 {
 	mdio@eb000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xeb000 0x1000>;
 
 		pcsphy5: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
index ae1c2abaaf362..b0390b711fef4 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -67,14 +67,14 @@ fman0_oh_0x7: port@87000 {
 	mdio0: mdio@fc000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xfc000 0x1000>;
 	};
 
 	xmdio0: mdio@fd000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xfd000 0x1000>;
 	};
 };
-- 
2.34.1

[PATCH v2 07/13] arm64: dts: layerscaple: add #dma-cells for qdma

[Frank Li]

Add #dma-cells for qdma to fix below warning.
	dma-controller@8380000: '#dma-cells' is a required property

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 1 +
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 +
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
 3 files changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 4188faa59368e..de92af774771d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -828,6 +828,7 @@ qdma: dma-controller@8380000 {
 				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error", "qdma-queue0",
 				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			#dma-cells = <1>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index caf765593547b..acf3eab61b626 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -974,6 +974,7 @@ qdma: dma-controller@8380000 {
 				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error", "qdma-queue0",
 				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			#dma-cells = <1>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 524b44f424272..801c5b77d608f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -925,6 +925,7 @@ qdma: dma-controller@8380000 {
 				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error", "qdma-queue0",
 				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			#dma-cells = <1>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x10000>;
-- 
2.34.1

[PATCH v2 08/13] arm64: dts: layerscape: rename node name "wdt" to "watchdog"

[Frank Li]

Rename node name "wdt" to "watchdog" to fix below warning:

arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dtb:
wdt@c000000: $nodename:0: 'wdt@c000000' does not match '^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 16 ++++++++--------
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 16 ++++++++--------
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 81b80b6b27d31..83236428e4cfd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -880,7 +880,7 @@ pcs7_3: ethernet-phy@3 {
 			};
 		};
 
-		cluster1_core0_watchdog: wdt@c000000 {
+		cluster1_core0_watchdog: watchdog@c000000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -890,7 +890,7 @@ QORIQ_CLK_PLL_DIV(16)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core1_watchdog: wdt@c010000 {
+		cluster1_core1_watchdog: watchdog@c010000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -900,7 +900,7 @@ QORIQ_CLK_PLL_DIV(16)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core2_watchdog: wdt@c020000 {
+		cluster1_core2_watchdog: watchdog@c020000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc020000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -910,7 +910,7 @@ QORIQ_CLK_PLL_DIV(16)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core3_watchdog: wdt@c030000 {
+		cluster1_core3_watchdog: watchdog@c030000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc030000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -920,7 +920,7 @@ QORIQ_CLK_PLL_DIV(16)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core0_watchdog: wdt@c100000 {
+		cluster2_core0_watchdog: watchdog@c100000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -930,7 +930,7 @@ QORIQ_CLK_PLL_DIV(16)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core1_watchdog: wdt@c110000 {
+		cluster2_core1_watchdog: watchdog@c110000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -940,7 +940,7 @@ QORIQ_CLK_PLL_DIV(16)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core2_watchdog: wdt@c120000 {
+		cluster2_core2_watchdog: watchdog@c120000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc120000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -950,7 +950,7 @@ QORIQ_CLK_PLL_DIV(16)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core3_watchdog: wdt@c130000 {
+		cluster2_core3_watchdog: watchdog@c130000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc130000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index dac33a3eab841..fe4755c54af2e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -389,7 +389,7 @@ serial3: serial@21d0600 {
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		cluster1_core0_watchdog: wdt@c000000 {
+		cluster1_core0_watchdog: watchdog@c000000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -399,7 +399,7 @@ QORIQ_CLK_PLL_DIV(4)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core1_watchdog: wdt@c010000 {
+		cluster1_core1_watchdog: watchdog@c010000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -409,7 +409,7 @@ QORIQ_CLK_PLL_DIV(4)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core0_watchdog: wdt@c100000 {
+		cluster2_core0_watchdog: watchdog@c100000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -419,7 +419,7 @@ QORIQ_CLK_PLL_DIV(4)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core1_watchdog: wdt@c110000 {
+		cluster2_core1_watchdog: watchdog@c110000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -429,7 +429,7 @@ QORIQ_CLK_PLL_DIV(4)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster3_core0_watchdog: wdt@c200000 {
+		cluster3_core0_watchdog: watchdog@c200000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc200000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -439,7 +439,7 @@ QORIQ_CLK_PLL_DIV(4)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster3_core1_watchdog: wdt@c210000 {
+		cluster3_core1_watchdog: watchdog@c210000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc210000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -449,7 +449,7 @@ QORIQ_CLK_PLL_DIV(4)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster4_core0_watchdog: wdt@c300000 {
+		cluster4_core0_watchdog: watchdog@c300000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc300000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -459,7 +459,7 @@ QORIQ_CLK_PLL_DIV(4)>,
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster4_core1_watchdog: wdt@c310000 {
+		cluster4_core1_watchdog: watchdog@c310000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc310000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
-- 
2.34.1

[PATCH v2 09/13] arm64: dts: layerscape: change pcie interrupt order

[Frank Li]

Change pcie interrupt order to fix below warning.

arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: pcie@3400000: interrupt-names:0: 'pme' was expected
        from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: pcie@3400000: interrupt-names:1: 'aer' was expected
        from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi |  6 +++---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 18 +++++++++---------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 64e14154d5969..daded853457bc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -535,9 +535,9 @@ pcie1: pcie@3400000 {
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 801c5b77d608f..8ce73a076e77a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -801,9 +801,9 @@ pcie1: pcie@3400000 {
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -840,9 +840,9 @@ pcie2: pcie@3500000 {
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -879,9 +879,9 @@ pcie3: pcie@3600000 {
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
-				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-- 
2.34.1

[PATCH v2 10/13] arm64: dts: layerscape: rename aux_bus to aux-bus

[Frank Li]

Rename aux_bus to aux-bus to fix below CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb:
    aux_bus: $nodename:0: 'aux_bus' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
        from schema $id: http://devicetree.org/schemas/simple-bus.yam

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index acf3eab61b626..364eeeab089bb 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -805,7 +805,7 @@ QORIQ_CLK_PLL_DIV(1)>,
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
 
-		aux_bus: aux_bus {
+		aux_bus: aux-bus {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			compatible = "simple-bus";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 8ce73a076e77a..f2fd8f984dc38 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -715,7 +715,7 @@ QORIQ_CLK_PLL_DIV(2)>,
 					    QORIQ_CLK_PLL_DIV(2)>;
 		};
 
-		aux_bus: aux_bus {
+		aux_bus: aux-bus {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			compatible = "simple-bus";
-- 
2.34.1

[PATCH v2 11/13] arm64: dts: fsl-ls1043a: remove unused clk-name at watchdog node

[Frank Li]

clk-name is undocument property and never used in watchdog driver. Remove
it and fix below CHECK_DTB warning.

arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: watchdog@2ad0000: Unevaluated properties are not allowed ('big-endian', 'clock-names' were unexpected)

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 364eeeab089bb..bfb5841456d76 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -783,7 +783,6 @@ wdog0: watchdog@2ad0000 {
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
-			clock-names = "wdog";
 			big-endian;
 		};
 
-- 
2.34.1

[PATCH v2 12/13] arm64: dts: fsl-ls1046a: rename thermal node name

[Frank Li]

Add thermal subfix for thermal node to fix below CHECK_DTB warnings.

	thermal-zones: '...' do not match any of the regexes:
	'^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$'

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index f2fd8f984dc38..060b74d3ca58d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -122,7 +122,7 @@ reboot {
 	};
 
 	thermal-zones {
-		ddr-controller {
+		ddr-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -142,7 +142,7 @@ ddr-ctrler-crit {
 			};
 		};
 
-		serdes {
+		serdes-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -162,7 +162,7 @@ serdes-crit {
 			};
 		};
 
-		fman {
+		fman-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 2>;
@@ -182,7 +182,7 @@ fman-crit {
 			};
 		};
 
-		core-cluster {
+		core-cluster-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
@@ -213,7 +213,7 @@ map0 {
 			};
 		};
 
-		sec {
+		sec-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 4>;
-- 
2.34.1

[PATCH v2 13/13] arm64: dts: layerscape: rename b(q)man-portals to b(q)man-portals-bus

[Frank Li]

Rename b(q)man-portals to b(q)man-portals-bus to fix below CHECK_DTB
warnings.

arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb:
  bman-portals@508000000: $nodename:0: 'bman-portals@508000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 4 ++--
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index bfb5841456d76..8f8cfc96790cc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -505,11 +505,11 @@ bman: bman@1890000 {
 			memory-region = <&bman_fbpr>;
 		};
 
-		bportals: bman-portals@508000000 {
+		bportals: bman-portals-bus@508000000 {
 			ranges = <0x0 0x5 0x08000000 0x8000000>;
 		};
 
-		qportals: qman-portals@500000000 {
+		qportals: qman-portals-bus@500000000 {
 			ranges = <0x0 0x5 0x00000000 0x8000000>;
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 060b74d3ca58d..200e52622f998 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -409,11 +409,11 @@ bman: bman@1890000 {
 
 		};
 
-		qportals: qman-portals@500000000 {
+		qportals: qman-portals-bus@500000000 {
 			ranges = <0x0 0x5 0x00000000 0x8000000>;
 		};
 
-		bportals: bman-portals@508000000 {
+		bportals: bman-portals-bus@508000000 {
 			ranges = <0x0 0x5 0x08000000 0x8000000>;
 		};
 
-- 
2.34.1

[PATCH v2 00/13] arm64: dts: layerscaple: clean up some simple CHECK_WARNING

[Frank Li]

Change from v1 to v2
- Combine some similar warning to one patch for difference ls chipes.
- Remove arm64: dts: layerscape: add '#power-control-cells' for rcpm
rcpm actually not power-controller, it is wakeup controller, need
better method to fix warning
- Add aux-bus fix
- Add pcie irq order fix
- Add rename to rtc fix
- Add thermal-node name fix
- Add q(b)man-portals node name fix

Frank Li (13):
  arm64: dts: layerscape: rename node 'timer' as 'rtc'
  arm64: dts: layerscape: add platform special compatible string for
    gpio
  arm64: dts: fsl-lx2160a: fix #address-cells for pinctrl-single
  arm64: dts: fsl-ls1012a: remove property 'snps,host-vbus-glitches'
  arm64: dts: layerscape: replace node name 'nor' with 'flash'
  arm64: dts: layerscape: remove compatible string 'fsl,fman-xmdio' for
    fman3
  arm64: dts: layerscaple: add #dma-cells for qdma
  arm64: dts: layerscape: rename node name "wdt" to "watchdog"
  arm64: dts: layerscape: change pcie interrupt order
  arm64: dts: layerscape: rename aux_bus to aux-bus
  arm64: dts: fsl-ls1043a: remove unused clk-name at watchdog node
  arm64: dts: fsl-ls1046a: rename thermal node name
  arm64: dts: layerscape: rename b(q)man-portals to b(q)man-portals-bus

 .../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 13 +++---
 .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi |  5 ++-
 .../boot/dts/freescale/fsl-ls1043a-qds.dts    |  2 +-
 .../boot/dts/freescale/fsl-ls1043a-rdb.dts    |  2 +-
 .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 10 ++---
 .../boot/dts/freescale/fsl-ls1046a-qds.dts    |  2 +-
 .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 45 ++++++++++---------
 .../boot/dts/freescale/fsl-ls1088a-qds.dts    |  2 +-
 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 18 ++++----
 .../boot/dts/freescale/fsl-ls208xa-qds.dtsi   |  2 +-
 .../boot/dts/freescale/fsl-ls208xa-rdb.dtsi   |  2 +-
 .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 18 ++++----
 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 14 +++---
 .../dts/freescale/qoriq-fman3-0-10g-0.dtsi    |  2 +-
 .../dts/freescale/qoriq-fman3-0-10g-1.dtsi    |  2 +-
 .../dts/freescale/qoriq-fman3-0-1g-0.dtsi     |  2 +-
 .../dts/freescale/qoriq-fman3-0-1g-1.dtsi     |  2 +-
 .../dts/freescale/qoriq-fman3-0-1g-2.dtsi     |  2 +-
 .../dts/freescale/qoriq-fman3-0-1g-3.dtsi     |  2 +-
 .../dts/freescale/qoriq-fman3-0-1g-4.dtsi     |  2 +-
 .../dts/freescale/qoriq-fman3-0-1g-5.dtsi     |  2 +-
 .../boot/dts/freescale/qoriq-fman3-0.dtsi     |  4 +-
 22 files changed, 78 insertions(+), 77 deletions(-)

-- 
2.34.1

Re: [PATCH v2 00/13] arm64: dts: layerscaple: clean up some simple CHECK_WARNING

[Shawn Guo]

On Wed, Jun 26, 2024 at 04:28:09PM -0400, Frank Li wrote:
> Change from v1 to v2
> - Combine some similar warning to one patch for difference ls chipes.
> - Remove arm64: dts: layerscape: add '#power-control-cells' for rcpm
> rcpm actually not power-controller, it is wakeup controller, need
> better method to fix warning
> - Add aux-bus fix
> - Add pcie irq order fix
> - Add rename to rtc fix
> - Add thermal-node name fix
> - Add q(b)man-portals node name fix
> 
> Frank Li (13):
>   arm64: dts: layerscape: rename node 'timer' as 'rtc'
>   arm64: dts: layerscape: add platform special compatible string for
>     gpio
>   arm64: dts: fsl-lx2160a: fix #address-cells for pinctrl-single
>   arm64: dts: fsl-ls1012a: remove property 'snps,host-vbus-glitches'
>   arm64: dts: layerscape: replace node name 'nor' with 'flash'
>   arm64: dts: layerscape: remove compatible string 'fsl,fman-xmdio' for
>     fman3
>   arm64: dts: layerscaple: add #dma-cells for qdma
>   arm64: dts: layerscape: rename node name "wdt" to "watchdog"
>   arm64: dts: layerscape: change pcie interrupt order
>   arm64: dts: layerscape: rename aux_bus to aux-bus
>   arm64: dts: fsl-ls1043a: remove unused clk-name at watchdog node
>   arm64: dts: fsl-ls1046a: rename thermal node name
>   arm64: dts: layerscape: rename b(q)man-portals to b(q)man-portals-bus

Applied all, thanks!

Re: [PATCH v2 07/13] arm64: dts: layerscaple: add #dma-cells for qdma

[Rob Herring]

On Wed, Jun 26, 2024 at 2:26 PM Frank Li <Frank.Li@nxp.com> wrote:
>
> Add #dma-cells for qdma to fix below warning.
>         dma-controller@8380000: '#dma-cells' is a required property
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 1 +
>  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 +
>  arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
>  3 files changed, 3 insertions(+)

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH v2 07/13] arm64: dts: layerscaple: add #dma-cells for qdma

[Rob Herring]

On Thu, Jun 27, 2024 at 11:17 AM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Jun 26, 2024 at 2:26 PM Frank Li <Frank.Li@nxp.com> wrote:
> >
> > Add #dma-cells for qdma to fix below warning.
> >         dma-controller@8380000: '#dma-cells' is a required property
> >
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 1 +
> >  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 +
> >  arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
> >  3 files changed, 3 insertions(+)
>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Except for the typo in the subject...

Frank, while I appreciate the great number of reductions in DT
warnings on FSL platforms you and others have been working on, your
work is sloppy with issues you should find yourself.

Rob

Re: [PATCH v2 07/13] arm64: dts: layerscaple: add #dma-cells for qdma

[Frank Li]

On Thu, Jun 27, 2024 at 11:22:57AM -0600, Rob Herring wrote:
> On Thu, Jun 27, 2024 at 11:17 AM Rob Herring <robh@kernel.org> wrote:
> >
> > On Wed, Jun 26, 2024 at 2:26 PM Frank Li <Frank.Li@nxp.com> wrote:
> > >
> > > Add #dma-cells for qdma to fix below warning.
> > >         dma-controller@8380000: '#dma-cells' is a required property
> > >
> > > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > > ---
> > >  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 1 +
> > >  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 +
> > >  arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
> > >  3 files changed, 3 insertions(+)
> >
> > Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> 
> Except for the typo in the subject...
> 
> Frank, while I appreciate the great number of reductions in DT
> warnings on FSL platforms you and others have been working on, your
> work is sloppy with issues you should find yourself.

I found the typo after I sent yesterday. I planned fix it after collect
some comments. It was already in shawn's tree. I hope shawn can help fix
it.

Frank

> 
> Rob

Re: [PATCH v2 07/13] arm64: dts: layerscaple: add #dma-cells for qdma

[Shawn Guo]

On Thu, Jun 27, 2024 at 02:27:29PM -0400, Frank Li wrote:
> On Thu, Jun 27, 2024 at 11:22:57AM -0600, Rob Herring wrote:
> > On Thu, Jun 27, 2024 at 11:17 AM Rob Herring <robh@kernel.org> wrote:
> > >
> > > On Wed, Jun 26, 2024 at 2:26 PM Frank Li <Frank.Li@nxp.com> wrote:
> > > >
> > > > Add #dma-cells for qdma to fix below warning.
> > > >         dma-controller@8380000: '#dma-cells' is a required property
> > > >
> > > > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > > > ---
> > > >  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 1 +
> > > >  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 +
> > > >  arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
> > > >  3 files changed, 3 insertions(+)
> > >
> > > Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> > 
> > Except for the typo in the subject...
> > 
> > Frank, while I appreciate the great number of reductions in DT
> > warnings on FSL platforms you and others have been working on, your
> > work is sloppy with issues you should find yourself.
> 
> I found the typo after I sent yesterday. I planned fix it after collect
> some comments. It was already in shawn's tree. I hope shawn can help fix
> it.

s/layerscaple/layerscape

Fixed it up.  Thanks for spotting it, Rob!

Shawn

Re: [PATCH v2 02/13] arm64: dts: layerscape: add platform special compatible string for gpio

[Rob Herring]

On Wed, Jun 26, 2024 at 2:26 PM Frank Li <Frank.Li@nxp.com> wrote:
>
> Add platform special compatible string for all gpio controller to fix
> below warning.
>
>  gpio@2300000: compatible: 'oneOf' conditional failed, one must be fixed:
>         ['fsl,qoriq-gpio'] is too short
>         'fsl,qoriq-gpio' is not one of ['fsl,mpc5121-gpio', 'fsl,mpc5125-gpio', 'fsl,mpc8349-gpio', 'fsl,mpc8572-gpio', 'fsl,mpc8610-gpio', 'fsl,pq3-gpio']
>         'fsl,qoriq-gpio' is not one of ['fsl,ls1021a-gpio', 'fsl,ls1028a-gpio', 'fsl,ls1043a-gpio', 'fsl,ls1088a-gpio', 'fsl,ls2080a-gpio']
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 4 ++--
>  arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 8 ++++----
>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 8 ++++----
>  3 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> index 2e1cddc11bf47..1b6ab9550cce9 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> @@ -407,7 +407,7 @@ duart1: serial@21c0600 {
>                 };
>
>                 gpio0: gpio@2300000 {
> -                       compatible = "fsl,qoriq-gpio";
> +                       compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
>                         reg = <0x0 0x2300000 0x0 0x10000>;
>                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
>                         gpio-controller;
> @@ -417,7 +417,7 @@ gpio0: gpio@2300000 {
>                 };
>
>                 gpio1: gpio@2310000 {
> -                       compatible = "fsl,qoriq-gpio";
> +                       compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
>                         reg = <0x0 0x2310000 0x0 0x10000>;
>                         interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
>                         gpio-controller;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> index f8c9489507e7a..524b44f424272 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> @@ -589,7 +589,7 @@ duart3: serial@21d0600 {
>                 };
>
>                 gpio0: gpio@2300000 {
> -                       compatible = "fsl,qoriq-gpio";
> +                       compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";

ls1046a isn't documented.

Rob

Re: [PATCH v2 02/13] arm64: dts: layerscape: add platform special compatible string for gpio

[Frank Li]

On Mon, Jul 01, 2024 at 10:43:32AM -0600, Rob Herring wrote:
> On Wed, Jun 26, 2024 at 2:26 PM Frank Li <Frank.Li@nxp.com> wrote:
> >
> > Add platform special compatible string for all gpio controller to fix
> > below warning.
> >
> >  gpio@2300000: compatible: 'oneOf' conditional failed, one must be fixed:
> >         ['fsl,qoriq-gpio'] is too short
> >         'fsl,qoriq-gpio' is not one of ['fsl,mpc5121-gpio', 'fsl,mpc5125-gpio', 'fsl,mpc8349-gpio', 'fsl,mpc8572-gpio', 'fsl,mpc8610-gpio', 'fsl,pq3-gpio']
> >         'fsl,qoriq-gpio' is not one of ['fsl,ls1021a-gpio', 'fsl,ls1028a-gpio', 'fsl,ls1043a-gpio', 'fsl,ls1088a-gpio', 'fsl,ls2080a-gpio']
> >
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 4 ++--
> >  arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 8 ++++----
> >  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 8 ++++----
> >  3 files changed, 10 insertions(+), 10 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> > index 2e1cddc11bf47..1b6ab9550cce9 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> > @@ -407,7 +407,7 @@ duart1: serial@21c0600 {
> >                 };
> >
> >                 gpio0: gpio@2300000 {
> > -                       compatible = "fsl,qoriq-gpio";
> > +                       compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
> >                         reg = <0x0 0x2300000 0x0 0x10000>;
> >                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> >                         gpio-controller;
> > @@ -417,7 +417,7 @@ gpio0: gpio@2300000 {
> >                 };
> >
> >                 gpio1: gpio@2310000 {
> > -                       compatible = "fsl,qoriq-gpio";
> > +                       compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
> >                         reg = <0x0 0x2310000 0x0 0x10000>;
> >                         interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> >                         gpio-controller;
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> > index f8c9489507e7a..524b44f424272 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> > @@ -589,7 +589,7 @@ duart3: serial@21d0600 {
> >                 };
> >
> >                 gpio0: gpio@2300000 {
> > -                       compatible = "fsl,qoriq-gpio";
> > +                       compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
> 
> ls1046a isn't documented.

Sorry, there are local dt-binding update patch, which I forget sent out.
So I have not found this problem when I sent out dts change.

Frank 

> 
> Rob