[PATCH v1] dt-bindings: pinctrl: npcm8xx: add missing pin group and mux function

[PATCH v1] dt-bindings: pinctrl: npcm8xx: add missing pin group and mux function

[Tomer Maimon]

Add the following missing pin group and mux function:
smb6b, smb6c, smb6d, smb7b, smb7c, smb7d, bu4, bu4b, bu5, bu5b, bu6,
gpo187.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
 .../pinctrl/nuvoton,npcm845-pinctrl.yaml      | 22 ++++++++++---------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
index b55d9c316659..f3c3f910a51f 100644
--- a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
@@ -85,11 +85,12 @@ patternProperties:
                   smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
                   sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
                   mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
-                  scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1,
-                  spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den,
-                  smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix,
-                  spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4,
-                  hgpio5, hgpio6, hgpio7 ]
+                  scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c,
+                  smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2,
+	  	  spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio,
+		  wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0,
+		  hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4,
+		  bu4b, bu5, bu5b, bu6, gpo187 ]
 
       function:
         description:
@@ -109,11 +110,12 @@ patternProperties:
                 smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
                 sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
                 mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
-                scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1,
-                spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den,
-                smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix,
-                spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4,
-                hgpio5, hgpio6, hgpio7 ]
+                scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c,
+                smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2,
+	  	spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio,
+		wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0,
+		hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4,
+		bu4b, bu5, bu5b, bu6, gpo187 ]
 
     dependencies:
       groups: [ function ]
-- 
2.34.1

Re: [PATCH v1] dt-bindings: pinctrl: npcm8xx: add missing pin group and mux function

[Rob Herring (Arm)]

On Thu, 27 Jun 2024 21:23:12 +0300, Tomer Maimon wrote:
> Add the following missing pin group and mux function:
> smb6b, smb6c, smb6d, smb7b, smb7c, smb7d, bu4, bu4b, bu5, bu5b, bu6,
> gpo187.
> 
> Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
> ---
>  .../pinctrl/nuvoton,npcm845-pinctrl.yaml      | 22 ++++++++++---------
>  1 file changed, 12 insertions(+), 10 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml:90:1: [error] syntax error: found character '\t' that cannot start any token (syntax)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240627182312.86382-1-tmaimon77@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.