[PATCH RESEND 0/2] Introduce ASUS Vivobook S 15

[PATCH RESEND 0/2] Introduce ASUS Vivobook S 15

[Xilin Wu via B4 Relay]

ASUS Vivobook S 15 is a laptop based on the Qualcomm Snapdragon X Elite
SoC (X1E78100). This series adds initial support for the device.

Currently working features:

- CPU frequency scaling up to 3.4GHz
- NVMe storage on PCIe 6a (capable of Gen4x4, currently limited to Gen4x2)
- Keyboard and touchpad
- WCN7850 Wi-Fi
- Two Type-C ports on the left side
- internal eDP display
- ADSP and CDSP remoteprocs

Some features which can get working with out of tree patches:

- GPU [1]
- Bluetooth [2]

Notably not working features:

- Battery monitoring via battmgr
- Orientation switching and altmode on the Type-C ports (USB4 retimer driver needed?)
- Two USB Type-A ports on the right side (dwc3 multiport controller)
- Front camera
- SD card slot
- HDMI connector (using a Parade PS186 DP 1.4 to HDMI 2.0 converter) 
- USB4 and the retimer (Parade PS8830?)
- Anything using the EC

Dump of the ACPI tables could be found here: [3]

[1] https://lore.kernel.org/all/20240623110753.141400-1-quic_akhilpo@quicinc.com/
[2] https://git.codelinaro.org/abel.vesa/linux/-/commits/topic/b4/x1e80100-bt
[3] https://github.com/aarch64-laptops/build/pull/103

Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
---
Changes in v2:
- EDITME: describe what is new in this series revision.
- EDITME: use bulletpoints and terse descriptions.
- Link to v1: https://lore.kernel.org/r/20240628-asus-vivobook-s15-v1-0-2a1e4571b8ab@gmail.com

---
Xilin Wu (2):
      dt-bindings: arm: qcom: Add ASUS Vivobook S 15
      arm64: dts: qcom: Add device tree for ASUS Vivobook S 15

 Documentation/devicetree/bindings/arm/qcom.yaml    |   1 +
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 .../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts   | 613 +++++++++++++++++++++
 3 files changed, 615 insertions(+)
---
base-commit: 642a16ca7994a50d7de85715996a8ce171a5bdfb
change-id: 20240628-asus-vivobook-s15-72a497863168

Best regards,
-- 
Xilin Wu <wuxilin123@gmail.com>

[PATCH RESEND 1/2] dt-bindings: arm: qcom: Add ASUS Vivobook S 15

[Xilin Wu via B4 Relay]

From: Xilin Wu <wuxilin123@gmail.com>

Add the compatible for this device.

Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index ec1c10a12470..8342e3f2523f 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -1036,6 +1036,7 @@ properties:
 
       - items:
           - enum:
+              - asus,vivobook-s15
               - qcom,x1e80100-crd
               - qcom,x1e80100-qcp
           - const: qcom,x1e80100

-- 
2.45.2

[PATCH RESEND 2/2] arm64: dts: qcom: Add device tree for ASUS Vivobook S 15

[Xilin Wu via B4 Relay]

From: Xilin Wu <wuxilin123@gmail.com>

ASUS Vivobook S 15 is a laptop based on the Qualcomm Snapdragon X Elite
SoC (X1E78100).

Add the device tree for the laptop with support for the following features:

- CPU frequency scaling up to 3.4GHz
- NVMe storage on PCIe 6a (capable of Gen4x4, currently limited to Gen4x2)
- Keyboard and touchpad
- WCN7850 Wi-Fi
- Two Type-C ports on the left side (USB3 only in one orientation)
- internal eDP display
- ADSP and CDSP remoteprocs

Further details could be found in the cover letter.

Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 .../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts   | 613 +++++++++++++++++++++
 2 files changed, 614 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5576c7d6ea06..fe08b6be565d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -258,5 +258,6 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-hdk-display-card.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-vivobook-s15.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-qcp.dtb
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
new file mode 100644
index 000000000000..65cb3b0bd109
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -0,0 +1,613 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	model = "ASUS Vivobook S 15";
+	compatible = "asus,vivobook-s15", "qcom,x1e80100";
+	chassis-type = "laptop";
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+    /* PS8830 USB4 Retimer? @ 0x8 */
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+    /* PS8830 USB4 Retimer? @ 0x8 */
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+    /* EC? @ 0x5b, 0x76 */
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+    /* PS8830 USB4 Retimer? @ 0x8 */
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp3 {
+	compatible = "qcom,x1e80100-dp";
+	/delete-property/ #sound-dai-cells;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss_dp3_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie6a_default>;
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn",
+			"qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn",
+			"qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+	status = "disabled";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie6a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+		    pins = "gpio154";
+		    function = "gpio";
+		    drive-strength = <2>;
+		    bias-pull-up;
+	    };
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-disable;
+	};
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};

-- 
2.45.2

Re: [PATCH RESEND 0/2] Introduce ASUS Vivobook S 15

[Rob Herring (Arm)]

On Fri, 28 Jun 2024 19:49:33 +0800, Xilin Wu wrote:
> ASUS Vivobook S 15 is a laptop based on the Qualcomm Snapdragon X Elite
> SoC (X1E78100). This series adds initial support for the device.
> 
> Currently working features:
> 
> - CPU frequency scaling up to 3.4GHz
> - NVMe storage on PCIe 6a (capable of Gen4x4, currently limited to Gen4x2)
> - Keyboard and touchpad
> - WCN7850 Wi-Fi
> - Two Type-C ports on the left side
> - internal eDP display
> - ADSP and CDSP remoteprocs
> 
> Some features which can get working with out of tree patches:
> 
> - GPU [1]
> - Bluetooth [2]
> 
> Notably not working features:
> 
> - Battery monitoring via battmgr
> - Orientation switching and altmode on the Type-C ports (USB4 retimer driver needed?)
> - Two USB Type-A ports on the right side (dwc3 multiport controller)
> - Front camera
> - SD card slot
> - HDMI connector (using a Parade PS186 DP 1.4 to HDMI 2.0 converter)
> - USB4 and the retimer (Parade PS8830?)
> - Anything using the EC
> 
> Dump of the ACPI tables could be found here: [3]
> 
> [1] https://lore.kernel.org/all/20240623110753.141400-1-quic_akhilpo@quicinc.com/
> [2] https://git.codelinaro.org/abel.vesa/linux/-/commits/topic/b4/x1e80100-bt
> [3] https://github.com/aarch64-laptops/build/pull/103
> 
> Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
> ---
> Changes in v2:
> - EDITME: describe what is new in this series revision.
> - EDITME: use bulletpoints and terse descriptions.
> - Link to v1: https://lore.kernel.org/r/20240628-asus-vivobook-s15-v1-0-2a1e4571b8ab@gmail.com
> 
> ---
> Xilin Wu (2):
>       dt-bindings: arm: qcom: Add ASUS Vivobook S 15
>       arm64: dts: qcom: Add device tree for ASUS Vivobook S 15
> 
>  Documentation/devicetree/bindings/arm/qcom.yaml    |   1 +
>  arch/arm64/boot/dts/qcom/Makefile                  |   1 +
>  .../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts   | 613 +++++++++++++++++++++
>  3 files changed, 615 insertions(+)
> ---
> base-commit: 642a16ca7994a50d7de85715996a8ce171a5bdfb
> change-id: 20240628-asus-vivobook-s15-72a497863168
> 
> Best regards,
> --
> Xilin Wu <wuxilin123@gmail.com>
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y qcom/x1e80100-asus-vivobook-s15.dtb' for 20240628-asus-vivobook-s15-v1-0-92cb39f3f166@gmail.com:

arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dtb: domain-idle-states: cluster-sleep-0: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dtb: domain-idle-states: cluster-sleep-1: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dtb: thermal-sensor@c271000: compatible: 'oneOf' conditional failed, one must be fixed:
	['qcom,x1e80100-tsens', 'qcom,tsens-v2'] is too long
	'qcom,x1e80100-tsens' is not one of ['qcom,ipq8064-tsens', 'qcom,msm8960-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,mdm9607-tsens', 'qcom,msm8226-tsens', 'qcom,msm8909-tsens', 'qcom,msm8916-tsens', 'qcom,msm8939-tsens', 'qcom,msm8974-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,msm8956-tsens', 'qcom,msm8976-tsens', 'qcom,qcs404-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,msm8953-tsens', 'qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,qcm2290-tsens', 'qcom,sa8775p-tsens', 'qcom,sc7180-tsens', 'qcom,sc7280-tsens', 'qcom,sc8180x-tsens', 'qcom,sc8280xp-tsens', 'qcom,sdm630-tsens', 'qcom,sdm845-tsens', 'qcom,sm6115-tsens', 'qcom,sm6350-tsens', 'qcom,sm6375-tsens', 'qcom,sm8150-tsens', 'qcom,sm8250-tsens', 'qcom,sm8350-tsens', 'qcom,sm8450-tsens', 'qcom,sm8550-tsens', 'qcom,sm8650-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,ipq8074-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,ipq9574-tsens']
	'qcom,tsens-v0_1' was expected
	'qcom,tsens-v1' was expected
	'qcom,ipq8074-tsens' was expected
	from schema $id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml#
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dtb: /soc@0/thermal-sensor@c271000: failed to match any schema with compatible: ['qcom,x1e80100-tsens', 'qcom,tsens-v2']
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dtb: thermal-sensor@c272000: compatible: 'oneOf' conditional failed, one must be fixed:
	['qcom,x1e80100-tsens', 'qcom,tsens-v2'] is too long
	'qcom,x1e80100-tsens' is not one of ['qcom,ipq8064-tsens', 'qcom,msm8960-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,mdm9607-tsens', 'qcom,msm8226-tsens', 'qcom,msm8909-tsens', 'qcom,msm8916-tsens', 'qcom,msm8939-tsens', 'qcom,msm8974-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,msm8956-tsens', 'qcom,msm8976-tsens', 'qcom,qcs404-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,msm8953-tsens', 'qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,qcm2290-tsens', 'qcom,sa8775p-tsens', 'qcom,sc7180-tsens', 'qcom,sc7280-tsens', 'qcom,sc8180x-tsens', 'qcom,sc8280xp-tsens', 'qcom,sdm630-tsens', 'qcom,sdm845-tsens', 'qcom,sm6115-tsens', 'qcom,sm6350-tsens', 'qcom,sm6375-tsens', 'qcom,sm8150-tsens', 'qcom,sm8250-tsens', 'qcom,sm8350-tsens', 'qcom,sm8450-tsens', 'qcom,sm8550-tsens', 'qcom,sm8650-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,ipq8074-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,ipq9574-tsens']
	'qcom,tsens-v0_1' was expected
	'qcom,tsens-v1' was expected
	'qcom,ipq8074-tsens' was expected
	from schema $id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml#
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dtb: /soc@0/thermal-sensor@c272000: failed to match any schema with compatible: ['qcom,x1e80100-tsens', 'qcom,tsens-v2']
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dtb: thermal-sensor@c273000: compatible: 'oneOf' conditional failed, one must be fixed:
	['qcom,x1e80100-tsens', 'qcom,tsens-v2'] is too long
	'qcom,x1e80100-tsens' is not one of ['qcom,ipq8064-tsens', 'qcom,msm8960-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,mdm9607-tsens', 'qcom,msm8226-tsens', 'qcom,msm8909-tsens', 'qcom,msm8916-tsens', 'qcom,msm8939-tsens', 'qcom,msm8974-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,msm8956-tsens', 'qcom,msm8976-tsens', 'qcom,qcs404-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,msm8953-tsens', 'qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,qcm2290-tsens', 'qcom,sa8775p-tsens', 'qcom,sc7180-tsens', 'qcom,sc7280-tsens', 'qcom,sc8180x-tsens', 'qcom,sc8280xp-tsens', 'qcom,sdm630-tsens', 'qcom,sdm845-tsens', 'qcom,sm6115-tsens', 'qcom,sm6350-tsens', 'qcom,sm6375-tsens', 'qcom,sm8150-tsens', 'qcom,sm8250-tsens', 'qcom,sm8350-tsens', 'qcom,sm8450-tsens', 'qcom,sm8550-tsens', 'qcom,sm8650-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,ipq8074-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,ipq9574-tsens']
	'qcom,tsens-v0_1' was expected
	'qcom,tsens-v1' was expected
	'qcom,ipq8074-tsens' was expected
	from schema $id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml#
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dtb: /soc@0/thermal-sensor@c273000: failed to match any schema with compatible: ['qcom,x1e80100-tsens', 'qcom,tsens-v2']
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dtb: thermal-sensor@c274000: compatible: 'oneOf' conditional failed, one must be fixed:
	['qcom,x1e80100-tsens', 'qcom,tsens-v2'] is too long
	'qcom,x1e80100-tsens' is not one of ['qcom,ipq8064-tsens', 'qcom,msm8960-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,mdm9607-tsens', 'qcom,msm8226-tsens', 'qcom,msm8909-tsens', 'qcom,msm8916-tsens', 'qcom,msm8939-tsens', 'qcom,msm8974-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,msm8956-tsens', 'qcom,msm8976-tsens', 'qcom,qcs404-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,msm8953-tsens', 'qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,qcm2290-tsens', 'qcom,sa8775p-tsens', 'qcom,sc7180-tsens', 'qcom,sc7280-tsens', 'qcom,sc8180x-tsens', 'qcom,sc8280xp-tsens', 'qcom,sdm630-tsens', 'qcom,sdm845-tsens', 'qcom,sm6115-tsens', 'qcom,sm6350-tsens', 'qcom,sm6375-tsens', 'qcom,sm8150-tsens', 'qcom,sm8250-tsens', 'qcom,sm8350-tsens', 'qcom,sm8450-tsens', 'qcom,sm8550-tsens', 'qcom,sm8650-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,ipq8074-tsens']
	'qcom,x1e80100-tsens' is not one of ['qcom,ipq9574-tsens']
	'qcom,tsens-v0_1' was expected
	'qcom,tsens-v1' was expected
	'qcom,ipq8074-tsens' was expected
	from schema $id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml#
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dtb: /soc@0/thermal-sensor@c274000: failed to match any schema with compatible: ['qcom,x1e80100-tsens', 'qcom,tsens-v2']
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dtb: pci@1bf8000: Unevaluated properties are not allowed ('vddpe-3v3-supply' was unexpected)
	from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dtb: usb@a2f8800: interrupt-names: ['pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#

Re: [PATCH RESEND 0/2] Introduce ASUS Vivobook S 15

[Elliot Berman]

On Fri, Jun 28, 2024 at 07:49:33PM +0800, Xilin Wu via B4 Relay wrote:
> ASUS Vivobook S 15 is a laptop based on the Qualcomm Snapdragon X Elite
> SoC (X1E78100). This series adds initial support for the device.
> 
> Currently working features:
> 
> - CPU frequency scaling up to 3.4GHz
> - NVMe storage on PCIe 6a (capable of Gen4x4, currently limited to Gen4x2)
> - Keyboard and touchpad
> - WCN7850 Wi-Fi
> - Two Type-C ports on the left side
> - internal eDP display
> - ADSP and CDSP remoteprocs
> 
> Some features which can get working with out of tree patches:
> 
> - GPU [1]
> - Bluetooth [2]
> 
> Notably not working features:
> 
> - Battery monitoring via battmgr
> - Orientation switching and altmode on the Type-C ports (USB4 retimer driver needed?)
> - Two USB Type-A ports on the right side (dwc3 multiport controller)
> - Front camera
> - SD card slot
> - HDMI connector (using a Parade PS186 DP 1.4 to HDMI 2.0 converter) 
> - USB4 and the retimer (Parade PS8830?)
> - Anything using the EC
> 
> Dump of the ACPI tables could be found here: [3]
> 
> [1] https://lore.kernel.org/all/20240623110753.141400-1-quic_akhilpo@quicinc.com/
> [2] https://git.codelinaro.org/abel.vesa/linux/-/commits/topic/b4/x1e80100-bt
> [3] https://github.com/aarch64-laptops/build/pull/103
> 
> Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
> ---
> Changes in v2:
> - EDITME: describe what is new in this series revision.
> - EDITME: use bulletpoints and terse descriptions.

Please update with comment about fixing the makefile, it is v2 and not
RESEND. (don't send v3 now, but please fix in future version)

> - Link to v1: https://lore.kernel.org/r/20240628-asus-vivobook-s15-v1-0-2a1e4571b8ab@gmail.com
> 
> ---
> Xilin Wu (2):
>       dt-bindings: arm: qcom: Add ASUS Vivobook S 15
>       arm64: dts: qcom: Add device tree for ASUS Vivobook S 15
> 
>  Documentation/devicetree/bindings/arm/qcom.yaml    |   1 +
>  arch/arm64/boot/dts/qcom/Makefile                  |   1 +
>  .../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts   | 613 +++++++++++++++++++++
>  3 files changed, 615 insertions(+)
> ---
> base-commit: 642a16ca7994a50d7de85715996a8ce171a5bdfb
> change-id: 20240628-asus-vivobook-s15-72a497863168
> 
> Best regards,
> -- 
> Xilin Wu <wuxilin123@gmail.com>
> 
> 
>