devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Spencer Hill <shill@d3engineering.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
	 Sakari Ailus <sakari.ailus@linux.intel.com>,
	 Spencer Hill <shill@d3engineering.com>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	 Sascha Hauer <s.hauer@pengutronix.de>,
	 Pengutronix Kernel Team <kernel@pengutronix.de>,
	 Fabio Estevam <festevam@gmail.com>,
	 Dave Stevenson <dave.stevenson@raspberrypi.com>,
	 Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	 devicetree@vger.kernel.org, imx@lists.linux.dev,
	 linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] media: dt-bindings: Add Sony IMX728
Date: Fri, 28 Jun 2024 17:17:00 -0400	[thread overview]
Message-ID: <20240628-imx728-driver-v2-1-80efa6774286@d3engineering.com> (raw)
In-Reply-To: <20240628-imx728-driver-v2-0-80efa6774286@d3engineering.com>

Add bindings for Sony IMX728.

Signed-off-by: Spencer Hill <shill@d3engineering.com>
---
 .../devicetree/bindings/media/i2c/sony,imx728.yaml | 119 +++++++++++++++++++++
 MAINTAINERS                                        |   7 ++
 2 files changed, 126 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml
new file mode 100644
index 000000000000..1b14dbcc473a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx728.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX728 Camera Sensor
+
+maintainers:
+  - Spencer Hill <shill@d3engineering.com>
+
+description:
+  The Sony IMX728 is a 1/1.72-Inch CMOS Solid-state image sensor with a
+  color square pixel array and 8.39M active pixels. It is programmed
+  through an I2C interface.
+
+  The sensor can output up to 3840x2160 at a maximum of 45 frames/s over
+  a CSI-2 serial interface. It supports RAW24/20/16/12 and 10.
+
+properties:
+  compatible:
+    enum:
+      - sony,imx728
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Clock frequency from 18 to 30MHz
+    maxItems: 1
+
+  clock-names:
+    const: inck
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Specifier for the GPIO connected to the XCLR (System Reset) pin.
+
+  avdd-supply:
+    description: Analog power supply (3.3V)
+
+  dvdd-supply:
+    description: Digital core power supply (1.1V)
+
+  ovdd-supply:
+    description: Digital I/O power supply (1.8V)
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: ../video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                - const: 1
+                - const: 2
+              - items:
+                - const: 1
+                - const: 2
+                - const: 3
+                - const: 4
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        clock-frequency = <400000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@1a {
+            compatible = "sony,imx728";
+            reg = <0x1a>;
+
+            clocks = <&fixed_clock>;
+            clock-names = "inck";
+
+            reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+
+            avdd-supply = <&camera_vdda_3v3>;
+            dvdd-supply = <&camera_vddd_1v1>;
+            ovdd-supply = <&camera_vddo_1v8>;
+
+            port {
+                camera1: endpoint {
+                    remote-endpoint = <&csi2_phy0>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <800000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index ef6be9d95143..a2811249ac8c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20589,6 +20589,13 @@ T:     git git://linuxtv.org/media_tree.git
 F:     Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
 F:     drivers/media/i2c/imx415.c

+SONY IMX728 SENSOR DRIVER
+M:     Spencer Hill <shill@d3engineering.com>
+L:     linux-media@vger.kernel.org
+S:     Maintained
+F:     Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml
+F:     drivers/media/i2c/imx728.c
+
 SONY MEMORYSTICK SUBSYSTEM
 M:     Maxim Levitsky <maximlevitsky@gmail.com>
 M:     Alex Dubov <oakad@yahoo.com>

--
2.43.0

Please be aware that this email includes email addresses outside of the organization.

  reply	other threads:[~2024-06-28 21:17 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-28 21:16 [PATCH v2 0/2] media: i2c: Add driver for Sony IMX728 Spencer Hill
2024-06-28 21:17 ` Spencer Hill [this message]
2024-07-01  9:36   ` [PATCH v2 1/2] media: dt-bindings: Add " Krzysztof Kozlowski
2024-07-02  6:56     ` Krzysztof Kozlowski
2024-07-01 19:28   ` Rob Herring (Arm)
2024-06-28 21:17 ` [PATCH v2 2/2] media: i2c: Add driver for " Spencer Hill
2024-06-29 20:51   ` Kieran Bingham
2024-06-30  6:15   ` Markus Elfring
2024-07-01  9:25   ` Alexander Stein
2024-07-01 14:00     ` Dave Stevenson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240628-imx728-driver-v2-1-80efa6774286@d3engineering.com \
    --to=shill@d3engineering.com \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=conor+dt@kernel.org \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sakari.ailus@linux.intel.com \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).