From: Hironori KIKUCHI <kikuchan98@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Hironori KIKUCHI <kikuchan98@gmail.com>,
Jagan Teki <jagan@amarulasolutions.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <quic_jesszhan@quicinc.com>,
Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org
Subject: [PATCH v2 3/3] drm/panel: st7701: Add Anbernic RG28XX panel support
Date: Fri, 28 Jun 2024 14:10:17 +0900 [thread overview]
Message-ID: <20240628051019.975172-4-kikuchan98@gmail.com> (raw)
In-Reply-To: <20240628051019.975172-1-kikuchan98@gmail.com>
The Anbernic RG28XX is a handheld gaming device with a 2.8 inch 480x640
display. Add support for the display panel.
This panel is driven by a variant of ST7701 driver IC internally,
confirmed by dumping and analyzing its BSP initialization sequence
by using a logic analyzer. It is very similar to the existing
densitron,dmt028vghmcmi-1a panel, but differs in some unknown
register values. Besides, it is connected via SPI, so add a new entry
for the panel.
Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
---
drivers/gpu/drm/panel/panel-sitronix-st7701.c | 151 ++++++++++++++++++
1 file changed, 151 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7701.c b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
index 07980f010bb..8450a4317c1 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7701.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
@@ -471,6 +471,55 @@ static void rg_arc_gip_sequence(struct st7701 *st7701)
msleep(120);
}
+static void rg28xx_gip_sequence(struct st7701 *st7701)
+{
+ st7701_switch_cmd_bkx(st7701, true, 3);
+ ST7701_WRITE(st7701, 0xEF, 0x08);
+
+ st7701_switch_cmd_bkx(st7701, true, 0);
+ ST7701_WRITE(st7701, 0xC3, 0x02, 0x10, 0x02);
+ ST7701_WRITE(st7701, 0xC7, 0x04);
+ ST7701_WRITE(st7701, 0xCC, 0x10);
+
+ st7701_switch_cmd_bkx(st7701, true, 1);
+ ST7701_WRITE(st7701, 0xEE, 0x42);
+ ST7701_WRITE(st7701, 0xE0, 0x00, 0x00, 0x02);
+
+ ST7701_WRITE(st7701, 0xE1, 0x04, 0xA0, 0x06, 0xA0, 0x05, 0xA0, 0x07, 0xA0,
+ 0x00, 0x44, 0x44);
+ ST7701_WRITE(st7701, 0xE2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00);
+ ST7701_WRITE(st7701, 0xE3, 0x00, 0x00, 0x22, 0x22);
+ ST7701_WRITE(st7701, 0xE4, 0x44, 0x44);
+ ST7701_WRITE(st7701, 0xE5, 0x0C, 0x90, 0xA0, 0xA0, 0x0E, 0x92, 0xA0, 0xA0,
+ 0x08, 0x8C, 0xA0, 0xA0, 0x0A, 0x8E, 0xA0, 0xA0);
+ ST7701_WRITE(st7701, 0xE6, 0x00, 0x00, 0x22, 0x22);
+ ST7701_WRITE(st7701, 0xE7, 0x44, 0x44);
+ ST7701_WRITE(st7701, 0xE8, 0x0D, 0x91, 0xA0, 0xA0, 0x0F, 0x93, 0xA0, 0xA0,
+ 0x09, 0x8D, 0xA0, 0xA0, 0x0B, 0x8F, 0xA0, 0xA0);
+ ST7701_WRITE(st7701, 0xEB, 0x00, 0x00, 0xE4, 0xE4, 0x44, 0x00, 0x40);
+ ST7701_WRITE(st7701, 0xED, 0xFF, 0xF5, 0x47, 0x6F, 0x0B, 0xA1, 0xBA, 0xFF,
+ 0xFF, 0xAB, 0x1A, 0xB0, 0xF6, 0x74, 0x5F, 0xFF);
+ ST7701_WRITE(st7701, 0xEF, 0x08, 0x08, 0x08, 0x45, 0x3F, 0x54);
+
+ st7701_switch_cmd_bkx(st7701, false, 0);
+
+ st7701_switch_cmd_bkx(st7701, true, 3);
+ ST7701_WRITE(st7701, 0xE6, 0x16);
+ ST7701_WRITE(st7701, 0xE8, 0x00, 0x0E);
+
+ st7701_switch_cmd_bkx(st7701, false, 0);
+ ST7701_WRITE(st7701, MIPI_DCS_SET_ADDRESS_MODE, 0x10);
+ ST7701_WRITE(st7701, MIPI_DCS_EXIT_SLEEP_MODE);
+ msleep(120);
+
+ st7701_switch_cmd_bkx(st7701, true, 3);
+ ST7701_WRITE(st7701, 0xE8, 0x00, 0x0C);
+ msleep(10);
+ ST7701_WRITE(st7701, 0xE8, 0x00, 0x00);
+ st7701_switch_cmd_bkx(st7701, false, 0);
+}
+
static int st7701_prepare(struct drm_panel *panel)
{
struct st7701 *st7701 = panel_to_st7701(panel);
@@ -986,6 +1035,106 @@ static const struct st7701_panel_desc rg_arc_desc = {
.gip_sequence = rg_arc_gip_sequence,
};
+static const struct drm_display_mode rg28xx_mode = {
+ .clock = 22325,
+
+ .hdisplay = 480,
+ .hsync_start = 480 + 40,
+ .hsync_end = 480 + 40 + 4,
+ .htotal = 480 + 40 + 4 + 20,
+
+ .vdisplay = 640,
+ .vsync_start = 640 + 2,
+ .vsync_end = 640 + 2 + 40,
+ .vtotal = 640 + 2 + 40 + 16,
+
+ .width_mm = 44,
+ .height_mm = 58,
+
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct st7701_panel_desc rg28xx_desc = {
+ .mode = &rg28xx_mode,
+
+ .panel_sleep_delay = 80,
+
+ .pv_gamma = {
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC0_MASK, 0),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC4_MASK, 0x10),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC8_MASK, 0x17),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC16_MASK, 0xd),
+
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC24_MASK, 0x11),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC52_MASK, 0x6),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC80_MASK, 0x5),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC108_MASK, 0x8),
+
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC147_MASK, 0x7),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC175_MASK, 0x1f),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC203_MASK, 0x4),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC231_MASK, 0x11),
+
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC239_MASK, 0xe),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC247_MASK, 0x29),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC251_MASK, 0x30),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC255_MASK, 0x1f)
+ },
+ .nv_gamma = {
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC0_MASK, 0),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC4_MASK, 0xd),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC8_MASK, 0x14),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC16_MASK, 0xe),
+
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC24_MASK, 0x11),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC52_MASK, 0x6),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC80_MASK, 0x4),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC108_MASK, 0x8),
+
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC147_MASK, 0x8),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC175_MASK, 0x20),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC203_MASK, 0x5),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC231_MASK, 0x13),
+
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC239_MASK, 0x13),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC247_MASK, 0x26),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC251_MASK, 0x30),
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
+ CFIELD_PREP(ST7701_CMD2_BK0_GAMCTRL_VC255_MASK, 0x1f)
+ },
+ .nlinv = 7,
+ .vop_uv = 4800000,
+ .vcom_uv = 1512500,
+ .vgh_mv = 15000,
+ .vgl_mv = -11730,
+ .avdd_mv = 6600,
+ .avcl_mv = -4400,
+ .gamma_op_bias = OP_BIAS_MIDDLE,
+ .input_op_bias = OP_BIAS_MIN,
+ .output_op_bias = OP_BIAS_MIN,
+ .t2d_ns = 1600,
+ .t3d_ns = 10400,
+ .eot_en = true,
+ .gip_sequence = rg28xx_gip_sequence,
+};
+
static void st7701_cleanup(void *data)
{
struct st7701 *st7701 = (struct st7701 *)data;
@@ -1120,11 +1269,13 @@ static const struct of_device_id st7701_dsi_of_match[] = {
MODULE_DEVICE_TABLE(of, st7701_dsi_of_match);
static const struct of_device_id st7701_spi_of_match[] = {
+ { .compatible = "anbernic,rg28xx-panel", .data = &rg28xx_desc },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, st7701_spi_of_match);
static const struct spi_device_id st7701_spi_ids[] = {
+ { "rg28xx-panel" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(spi, st7701_spi_ids);
--
2.45.2
next prev parent reply other threads:[~2024-06-28 5:11 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-28 5:10 [PATCH v2 0/3] drm/panel: st7701: Add Anbernic RG28XX panel support Hironori KIKUCHI
2024-06-28 5:10 ` [PATCH v2 1/3] dt-bindings: display: st7701: Add Anbernic RG28XX panel Hironori KIKUCHI
2024-06-28 16:27 ` Conor Dooley
2024-06-29 8:26 ` Hironori KIKUCHI
2024-06-30 14:17 ` Conor Dooley
2024-07-01 17:28 ` Hironori KIKUCHI
2024-07-02 15:34 ` Conor Dooley
2024-06-28 5:10 ` [PATCH v2 2/3] drm/panel: st7701: Add support for SPI for configuration Hironori KIKUCHI
2024-06-28 8:22 ` Neil Armstrong
2024-06-29 8:25 ` Hironori KIKUCHI
2024-06-28 5:10 ` Hironori KIKUCHI [this message]
2024-06-28 8:22 ` [PATCH v2 3/3] drm/panel: st7701: Add Anbernic RG28XX panel support Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240628051019.975172-4-kikuchan98@gmail.com \
--to=kikuchan98@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jagan@amarulasolutions.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_jesszhan@quicinc.com \
--cc=robh@kernel.org \
--cc=sam@ravnborg.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).