[PATCH 3/6] arm64: dts: qcom: sc7280: Add IMX577 camera sensor

[Vikram Sharma <quic_vikramsa@quicinc.com>]

Add support for IMX577 camera sensor for SC7280 SoC.

Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com>
Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 9ac251fec262..1c99ee09a11a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -5167,6 +5167,39 @@ cci3_sleep: cci3-sleep-state {
 				bias-pull-down;
 			};
 
+			cam2_default: cam2-default {
+				rst {
+					pins = "gpio78"; /*cam3*/
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				mclk {
+					pins = "gpio67"; /*cam3*/
+					function = "cam_mclk";
+					drive-strength = <2>; /*RB5 was 16 and i changed to 2 here*/
+					bias-disable;
+				};
+			};
+
+			cam2_suspend: cam2-suspend {
+				rst {
+					pins = "gpio78"; /*cam3*/
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+					output-low;
+				};
+
+				mclk {
+					pins = "gpio67"; /*cam3*/
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
 			dp_hot_plug_det: dp-hot-plug-det-state {
 				pins = "gpio47";
 				function = "dp_hot";

-- 
2.25.1