Re: [PATCH v2 05/10] dt-bindings: iio: adc: adi,ad7606: add supply properties

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 28 Jun 2024 14:48:23 +0000
Guillaume Stols <gstols@baylibre.com> wrote:

> Add voltage supplies
> 
> Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Trivial comment inline. No need to reroll for that though.

> ---
>  Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> index 509970922cda..a1c38a5812f7 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> @@ -35,6 +35,15 @@ properties:
>  
>    avcc-supply: true
>  
> +  vdrive-supply:
> +    description:
> +      Determines the voltage level at which the interface logic pins will
> +      operate.
> +
> +  refin-supply:
> +    description:
> +      The voltage supply for optional external reference voltage.
> +
>    interrupts:
>      description:
>        The BUSY pin falling edge indicates that the conversion is over, and thus
> @@ -106,9 +115,11 @@ required:
>    - reg
>    - spi-cpha
>    - avcc-supply
> +  - vdrive-supply
>    - interrupts
>    - adi,conversion-start-gpios
>  
> +
Unrelated white space change.  Remember to check patches for these.
If whitespace changes are needed have an additional patch that just does
that.

>  allOf:
>    - $ref: /schemas/spi/spi-peripheral-props.yaml#
>  
> @@ -130,6 +141,7 @@ examples:
>              spi-cpha;
>  
>              avcc-supply = <&adc_vref>;
> +            vdrive-supply = <&vdd_supply>;
>  
>              interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
>              interrupt-parent = <&gpio>;
>