devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	imx@lists.linux.dev (open list:ARM/FREESCALE IMX / MXC ARM
	ARCHITECTURE),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE),
	linux-kernel@vger.kernel.org (open list)
Cc: imx@lists.linux.dev
Subject: [PATCH v2 5/7] arm64: dts: imx95-19x19-evk: add flexspi and child node
Date: Mon,  1 Jul 2024 16:07:26 -0400	[thread overview]
Message-ID: <20240701200728.1887467-5-Frank.Li@nxp.com> (raw)
In-Reply-To: <20240701200728.1887467-1-Frank.Li@nxp.com>

Add flexspi and child flash node.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v1 to v2
- move gpio pinctrl inder flash@0
- add reset-gpios
---
 .../boot/dts/freescale/imx95-19x19-evk.dts    | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 660e623f4f964..2b820a961c173 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -163,6 +163,25 @@ sound-wm8962 {
 	};
 };
 
+&flexspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexspi1_reset>;
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <200000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
 &lpi2c4 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -336,6 +355,28 @@ &wdog3 {
 };
 
 &scmi_iomuxc {
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B			0x3fe
+			IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK			0x3fe
+			IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS			0x3fe
+			IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0		0x3fe
+			IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1		0x3fe
+			IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2		0x3fe
+			IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3		0x3fe
+			IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4		0x3fe
+			IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5		0x3fe
+			IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6		0x3fe
+			IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7		0x3fe
+		>;
+	};
+
+	pinctrl_flexspi1_reset: flexspi1-reset-grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11			0x3fe
+		>;
+	};
+
 	pinctrl_hp: hpgrp {
 		fsl,pins = <
 			IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11		0x31e
-- 
2.34.1


  parent reply	other threads:[~2024-07-01 20:07 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-01 20:07 [PATCH v2 1/7] arm64: dts: imx95: add edma[1..3] nodes Frank Li
2024-07-01 20:07 ` [PATCH v2 2/7] arm64: dts: imx95: add sai[1..6], xcvr and micfill Frank Li
2024-07-01 20:07 ` [PATCH v2 3/7] arm64: dts: imx95-19x19-evk: Add audio related nodes Frank Li
2024-07-01 20:07 ` [PATCH v2 4/7] arm64: dts: imx95: add flexspi node Frank Li
2024-07-01 20:07 ` Frank Li [this message]
2024-07-01 20:07 ` [PATCH v2 6/7] arm64: dts: imx95: add thermal_zone label Frank Li
2024-07-01 20:07 ` [PATCH v2 7/7] arm64: dts: imx95-19x19-evk: add pwm fan control Frank Li
2024-08-05  8:08 ` [PATCH v2 1/7] arm64: dts: imx95: add edma[1..3] nodes Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240701200728.1887467-5-Frank.Li@nxp.com \
    --to=frank.li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).