[PATCH v2 7/7] arm64: dts: imx95-19x19-evk: add pwm fan control

[Frank Li <Frank.Li@nxp.com>]

Add pwm fan and overwrite default thermal nodes.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v1 to v2
- Add tpm6 node
---
 .../boot/dts/freescale/imx95-19x19-evk.dts    | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 2b820a961c173..37a1d4ca1b207 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/pwm/pwm.h>
 #include "imx95.dtsi"
 
 / {
@@ -31,6 +32,13 @@ memory@80000000 {
 		reg = <0x0 0x80000000 0 0x80000000>;
 	};
 
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		pwms = <&tpm6 2 4000000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <64 128 192 255>;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -463,6 +471,12 @@ IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0			0x31e
 		>;
 	};
 
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO19__TPM6_CH2			0x51e
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX      0x31e
@@ -566,3 +580,50 @@ IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
 		>;
 	};
 };
+
+&thermal_zones {
+	a55-thermal {
+		trips {
+			atrip2: trip2 {
+				temperature = <55000>;
+				hysteresis = <2000>;
+				type = "active";
+			};
+
+			atrip3: trip3 {
+				temperature = <65000>;
+				hysteresis = <2000>;
+				type = "active";
+			};
+
+			atrip4: trip4 {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map1 {
+				trip = <&atrip2>;
+				cooling-device = <&fan0 0 1>;
+			};
+
+			map2 {
+				trip = <&atrip3>;
+				cooling-device = <&fan0 1 2>;
+			};
+
+			map3 {
+				trip = <&atrip4>;
+				cooling-device = <&fan0 2 3>;
+			};
+		};
+	};
+};
+
+&tpm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm6>;
+	status = "okay";
+};
-- 
2.34.1