Re: [PATCH v2 3/3] riscv: dts: thead: add basic spi node

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 4202 bytes --]

Kanak, Drew,

On Mon, Jul 01, 2024 at 05:43:54PM +0530, Kanak Shilledar wrote:
> created spi0 node with fixed clock. the spi0 node
> uses synopsis designware driver and has the following
> compatible "snps,dw-apb-ssi". the spi0 node is connected
> to a SPI NOR flash pad which is left unpopulated on the back
> side of the board.
> 
> Signed-off-by: Kanak Shilledar <kanakshilledar@gmail.com>
> ---
> Changes in v2:
> - Separated from a single patch file
> ---
>  .../boot/dts/thead/th1520-beaglev-ahead.dts      |  9 +++++++++
>  .../boot/dts/thead/th1520-lichee-module-4a.dtsi  |  4 ++++
>  .../riscv/boot/dts/thead/th1520-lichee-pi-4a.dts |  5 +++++

Didn't you say there was a flash on one of these two boards?

>  arch/riscv/boot/dts/thead/th1520.dtsi            | 16 ++++++++++++++++
>  4 files changed, 34 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
> index d9b4de9e4757..3103b74e0288 100644
> --- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
> +++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
> @@ -17,6 +17,7 @@ aliases {
>  		gpio1 = &gpio1;
>  		gpio2 = &gpio2;
>  		gpio3 = &gpio3;
> +		spi0 = &spi0;

"spi" would sort after "serial".

>  		serial0 = &uart0;
>  		serial1 = &uart1;
>  		serial2 = &uart2;
> @@ -52,6 +53,10 @@ &sdhci_clk {
>  	clock-frequency = <198000000>;
>  };
>  
> +&spi_clk {
> +	clock-frequency = <396000000>;
> +};

I'm pretty sceptical about adding more of these fixed clocks, rather
than waiting for the clock driver. Drew, what do you think? Should we
just add one more to your fixup list or would you rather delay? Guess it
depends on how long more you think that clock driver is likely to take.

Thanks,
Conor.

> +
>  &uart_sclk {
>  	clock-frequency = <100000000>;
>  };
> @@ -79,3 +84,7 @@ &sdio0 {
>  &uart0 {
>  	status = "okay";
>  };
> +
> +&spi0 {
> +	status = "okay";
> +};
> diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
> index 1365d3a512a3..6939bd36560c 100644
> --- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
> @@ -33,6 +33,10 @@ &sdhci_clk {
>  	clock-frequency = <198000000>;
>  };
>  
> +&spi_clk {
> +	clock-frequency = <396000000>;
> +};
> +
>  &uart_sclk {
>  	clock-frequency = <100000000>;
>  };
> diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
> index 9a3884a73e13..14b06dd81a9a 100644
> --- a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
> +++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
> @@ -14,6 +14,7 @@ aliases {
>  		gpio1 = &gpio1;
>  		gpio2 = &gpio2;
>  		gpio3 = &gpio3;
> +		spi0 = &spi0;
>  		serial0 = &uart0;
>  		serial1 = &uart1;
>  		serial2 = &uart2;
> @@ -30,3 +31,7 @@ chosen {
>  &uart0 {
>  	status = "okay";
>  };
> +
> +&spi0 {
> +	status = "okay";
> +};
> diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> index d2fa25839012..f962de663e7e 100644
> --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> @@ -140,6 +140,12 @@ apb_clk: apb-clk-clock {
>  		#clock-cells = <0>;
>  	};
>  
> +	spi_clk: spi-clock {
> +		compatible = "fixed-clock";
> +		clock-output-names = "spi_clk";
> +		#clock-cells = <0>;
> +	};
> +
>  	uart_sclk: uart-sclk-clock {
>  		compatible = "fixed-clock";
>  		clock-output-names = "uart_sclk";
> @@ -183,6 +189,16 @@ clint: timer@ffdc000000 {
>  					      <&cpu3_intc 3>, <&cpu3_intc 7>;
>  		};
>  
> +		spi0: spi@ffe700c000 {
> +			compatible = "thead,th1520-spi", "snps,dw-apb-ssi";
> +			reg = <0xff 0xe700c000 0x0 0x1000>;
> +			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&spi_clk>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		uart0: serial@ffe7014000 {
>  			compatible = "snps,dw-apb-uart";
>  			reg = <0xff 0xe7014000 0x0 0x100>;
> -- 
> 2.45.2
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]