[PATCH v7 0/5] arm64: dts: add description for solidrun cn9130 som and clearfog boards

[Josua Mayer <josua@solid-run.com>]

SolidRun CN9130 SoM is a mostly pin-comptible replacement for Armada 388
SoM used in Clearfog and Clearfog Pro boards.

1. Add new binding for compatible strings closely matching the original.

2. Add device-tree includes for SoM and carrier shared design.

3. Add device-tree for both Clearfog Base and Pro.

While dtbs_check is happy with LED descriptions behind dsa switch,
functionally they require supporting code by Andrew Lunn:
https://lore.kernel.org/r/20240401-v6-8-0-net-next-mv88e6xxx-leds-v4-v3-0-221b3fa55f78@lunn.ch

NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE:
CN9130 SoM has a different footprint from Armada 388 SoM.
Components on the carrier board below the SoM may collide causing
damage, such as on Clearfog Base.

Signed-off-by: Josua Mayer <josua@solid-run.com>
---
Changes in v7:
- dropped dt-bindings for usb phy and adc which were picked into their
  respective trees
- Link to v6: https://lore.kernel.org/r/20240602-cn9130-som-v6-0-89393e86d4c7@solid-run.com

Changes in v6:
- add device-tree for cn9132 clearfog and CEX-7 module
- add dt compatible for tla2021 adc
  --> I don't plan to submit a driver patch because I can't test it
  --> might share untested patch
- add dt property for swapping d+-/d- on cp110 utmi phy
  --> I plan to submit a driver patch, already prototyped
- removed duplicate node reference / status=okay for cp0_utmi from
  cn9131-cf-solidwan.dts
- rebased on 6.10-rc1
- Link to v5: https://lore.kernel.org/r/20240509-cn9130-som-v5-0-95493eb5c79d@solid-run.com

Changes in v5:
- replaced *-gpio properties with preferred *-gpios
  (Reported-by: robh@kernel.org)
- removed fixed-regulator regulator-oc-protection-microamp properties
  This property is intended to set a configurable over-current limit to
  a particular value. The physical component however is not
  configurable, remove the property.
- kept all review tags since the changes were minor, hope that is okay
  with everybody.
- Link to v4: https://lore.kernel.org/r/20240502-cn9130-som-v4-0-0a2e2f1c70d8@solid-run.com

Changes in v4:
- Picked up reviewed-by tags by Andrew Lunn.
- fixed a typo and changed 3-line comment into single-line comment
  for clearfog-base/-pro dts, but kept review tags since change was
  minor.
- Updated SFP led labels to use "sfp?:colour" without "color" property,
  to avoid duplicate labels while reflecting they are each dual-colour.
- Link to v3: https://lore.kernel.org/r/20240414-cn9130-som-v3-0-350a67d44e0a@solid-run.com

Changes in v3:
- picked up acked-by for dt-bindings
- skipped acked-by for dts because additional changes were made:
  - moved legacy netdev aliases to carrier dts
  - fix status property style errors
  - add pinctrl for secondary spi chip-select on mikrobus header (& som)
  - specify spi bus frequency limits for som
- Added CN9131 SolidWAN board
- Link to v2: https://lore.kernel.org/r/20240404-cn9130-som-v2-0-3af2229c7d2d@solid-run.com

Changes in v2:
- rewrote dt bindings dropping unnecessary compatibles
  (Reported-By: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>)
- added bindings for two additional boards (cn9131/9132)
  support planned for the coming weeks, mostly serves
  illustrational purposes, to understand cn913x variants
- cf-pro: add description for LEDs behind DSA switch
- cf-base: add description for LEDs behind PHYs
  (Reported-By: Andrew Lunn <andrew@lunn.ch>)
- Link to v1: https://lore.kernel.org/r/20240321-cn9130-som-v1-0-711127a409ae@solid-run.com

---
Josua Mayer (5):
      dt-bindings: arm64: marvell: add solidrun cn9130 som based boards
      dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board
      arm64: dts: add description for solidrun cn9130 som and clearfog boards
      arm64: dts: add description for solidrun cn9131 solidwan board
      arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board

 .../bindings/arm/marvell/armada-7k-8k.yaml         |  18 +
 arch/arm64/boot/dts/marvell/Makefile               |   4 +
 arch/arm64/boot/dts/marvell/cn9130-cf-base.dts     | 178 ++++++
 arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts      | 375 +++++++++++
 arch/arm64/boot/dts/marvell/cn9130-cf.dtsi         | 197 ++++++
 arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi     | 160 +++++
 arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts | 637 ++++++++++++++++++
 arch/arm64/boot/dts/marvell/cn9132-clearfog.dts    | 673 +++++++++++++++++++
 arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi    | 712 +++++++++++++++++++++
 9 files changed, 2954 insertions(+)
---
base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0
change-id: 20240318-cn9130-som-848e86acb0ac

Sincerely,
-- 
Josua Mayer <josua@solid-run.com>