From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp.gentoo.org (woodpecker.gentoo.org [140.211.166.183]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id B31A113791C; Fri, 5 Jul 2024 06:38:45 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=140.211.166.183 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720161527; cv=none; b=fU1JW+0sWXVHS3HLNHBaKSCu00aMyRP1tdMSi3GrKLGfcDL9/dD7I9ZsYFk9U07jVgBjq1cZLVAB1mkAZ5qLP5XyM784OtRBiXeTL1wgXK5u7pGBGE9YZ0QHX2HCmxxO/3TkvkDpAzr98NfZ1oVPufT5TNvV3LCDIrwNFxFLrtM= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720161527; c=relaxed/simple; bh=kdH8halGy+gunnKXeuUui3NGUp2HJvl+znuYTEqUXFw=; h=Date:From:To:Cc:Subject:Message-ID:References:MIME-Version: Content-Type:Content-Disposition:In-Reply-To; b=isE3ZeKtcIT80L7T49gSukuvfHwu/bGs9Bd+tr7JDX73zv62I29c4nKtqOYwnuhxiSOKFFwijU6NcUhwZAtqKiJ9ruKCS6bdbQoFUmzoTs4jdqCr88tCzCQVC7fFKln7tWhdMFCEa4ZSVbS/snBZd4KnpPWXIERfhMTKmnOu4iI= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gentoo.org; spf=pass smtp.mailfrom=gentoo.org; arc=none smtp.client-ip=140.211.166.183 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gentoo.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gentoo.org Date: Fri, 5 Jul 2024 06:38:39 +0000 From: Yixun Lan To: Jisheng Zhang Cc: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Conor Dooley , Paul Walmsley , Palmer Dabbelt , Albert Ou , Daniel Lezcano , Thomas Gleixner , Samuel Holland , Anup Patel , Greg Kroah-Hartman , Jiri Slaby , Lubomir Rintel , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Yangyu Chen , Inochi Amaoto , linux-serial@vger.kernel.org, linux-riscv@lists.infradead.org, Meng Zhang Subject: Re: [PATCH v3 08/11] riscv: dts: add initial SpacemiT K1 SoC device tree Message-ID: <20240705063839.GA3042186@ofsar> References: <20240703-k1-01-basic-dt-v3-0-12f73b47461e@gentoo.org> <20240703-k1-01-basic-dt-v3-8-12f73b47461e@gentoo.org> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: On 21:46 Thu 04 Jul , Jisheng Zhang wrote: > On Wed, Jul 03, 2024 at 02:55:11PM +0000, Yixun Lan wrote: > > From: Yangyu Chen > > > > Banana Pi BPI-F3 motherboard is powered by SpacemiT K1[1]. > > > > Key features: > > - 4 cores per cluster, 2 clusters on chip > > - UART IP is Intel XScale UART > > > > Some key considerations: > > - ISA string is inferred from vendor documentation[2] > > - Cluster topology is inferred from datasheet[1] and L2 in vendor dts[3] > > - No coherent DMA on this board > > Inferred by taking vendor ethernet and MMC drivers to the mainline > > kernel. Without dma-noncoherent in soc node, the driver fails. > > - No cache nodes now > > The parameters from vendor dts are likely to be wrong. It has 512 > > sets for a 32KiB L1 Cache. In this case, each set is 64B in size. > > When the size of the cache line is 64B, it is a directly mapped > > cache rather than a set-associative cache, the latter is commonly > > used. Thus, I didn't use the parameters from vendor dts. > > > > Currently only support booting into console with only uart, other > > features will be added soon later. > > > > Link: https://docs.banana-pi.org/en/BPI-F3/SpacemiT_K1_datasheet [1] > > Link: https://developer.spacemit.com/#/documentation?token=BWbGwbx7liGW21kq9lucSA6Vnpb [2] > > Link: https://gitee.com/bianbu-linux/linux-6.1/blob/bl-v1.0.y/arch/riscv/boot/dts/spacemit/k1-x.dtsi [3] > > Signed-off-by: Yangyu Chen > > Signed-off-by: Yixun Lan > > --- > > arch/riscv/boot/dts/spacemit/k1.dtsi | 376 +++++++++++++++++++++++++++++++++++ > > 1 file changed, 376 insertions(+) > > > > diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi > > new file mode 100644 > > index 0000000000000..a076e35855a2e > > --- /dev/null > > +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi > > @@ -0,0 +1,376 @@ > > +// SPDX-License-Identifier: GPL-2.0 OR MIT > > +/* > > + * Copyright (C) 2024 Yangyu Chen > > + */ > > + > > +/dts-v1/; > > +/ { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + model = "SpacemiT K1"; > > + compatible = "spacemit,k1"; > > + > > + aliases { > > + serial0 = &uart0; > > + serial1 = &uart2; > > + serial2 = &uart3; > > + serial3 = &uart4; > > + serial4 = &uart5; > > + serial5 = &uart6; > > + serial6 = &uart7; > > + serial7 = &uart8; > > + serial8 = &uart9; > > + }; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + timebase-frequency = <24000000>; > > + > > + cpu-map { > > + cluster0 { > > + core0 { > > + cpu = <&cpu_0>; > > + }; > > + core1 { > > + cpu = <&cpu_1>; > > + }; > > + core2 { > > + cpu = <&cpu_2>; > > + }; > > + core3 { > > + cpu = <&cpu_3>; > > + }; > > + }; > > + > > + cluster1 { > > + core0 { > > + cpu = <&cpu_4>; > > + }; > > + core1 { > > + cpu = <&cpu_5>; > > + }; > > + core2 { > > + cpu = <&cpu_6>; > > + }; > > + core3 { > > + cpu = <&cpu_7>; > > + }; > > + }; > > + }; > > + > > + cpu_0: cpu@0 { > > + compatible = "spacemit,x60", "riscv"; > > + device_type = "cpu"; > > + reg = <0>; > > + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt"; > > + riscv,isa-base = "rv64i"; > > + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", > > + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", > > + "zifencei", "zihintpause", "zihpm", "zfh", "zba", > > + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", > > + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; > > + riscv,cbom-block-size = <64>; > > + riscv,cbop-block-size = <64>; > > + riscv,cboz-block-size = <64>; > > + mmu-type = "riscv,sv39"; > > + > > + cpu0_intc: interrupt-controller { > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + }; > > + }; > > + > > + cpu_1: cpu@1 { > > + compatible = "spacemit,x60", "riscv"; > > + device_type = "cpu"; > > + reg = <1>; > > + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt"; > > + riscv,isa-base = "rv64i"; > > + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", > > + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", > > + "zifencei", "zihintpause", "zihpm", "zfh", "zba", > > + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", > > + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; > > + riscv,cbom-block-size = <64>; > > + riscv,cbop-block-size = <64>; > > + riscv,cboz-block-size = <64>; > > + mmu-type = "riscv,sv39"; > > + > > + cpu1_intc: interrupt-controller { > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + }; > > + }; > > + > > + cpu_2: cpu@2 { > > + compatible = "spacemit,x60", "riscv"; > > + device_type = "cpu"; > > + reg = <2>; > > + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt"; > > + riscv,isa-base = "rv64i"; > > + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", > > + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", > > + "zifencei", "zihintpause", "zihpm", "zfh", "zba", > > + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", > > + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; > > + riscv,cbom-block-size = <64>; > > + riscv,cbop-block-size = <64>; > > + riscv,cboz-block-size = <64>; > > + mmu-type = "riscv,sv39"; > > + > > + cpu2_intc: interrupt-controller { > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + }; > > + }; > > + > > + cpu_3: cpu@3 { > > + compatible = "spacemit,x60", "riscv"; > > + device_type = "cpu"; > > + reg = <3>; > > + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt"; > > + riscv,isa-base = "rv64i"; > > + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", > > + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", > > + "zifencei", "zihintpause", "zihpm", "zfh", "zba", > > + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", > > + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; > > + riscv,cbom-block-size = <64>; > > + riscv,cbop-block-size = <64>; > > + riscv,cboz-block-size = <64>; > > + mmu-type = "riscv,sv39"; > > + > > + cpu3_intc: interrupt-controller { > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + }; > > + }; > > + > > + cpu_4: cpu@4 { > > + compatible = "spacemit,x60", "riscv"; > > + device_type = "cpu"; > > + reg = <4>; > > + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt"; > > + riscv,isa-base = "rv64i"; > > + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", > > + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", > > + "zifencei", "zihintpause", "zihpm", "zfh", "zba", > > + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", > > + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; > > + riscv,cbom-block-size = <64>; > > + riscv,cbop-block-size = <64>; > > + riscv,cboz-block-size = <64>; > > + mmu-type = "riscv,sv39"; > > + > > + cpu4_intc: interrupt-controller { > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + }; > > + }; > > + > > + cpu_5: cpu@5 { > > + compatible = "spacemit,x60", "riscv"; > > + device_type = "cpu"; > > + reg = <5>; > > + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt"; > > + riscv,isa-base = "rv64i"; > > + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", > > + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", > > + "zifencei", "zihintpause", "zihpm", "zfh", "zba", > > + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", > > + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; > > + riscv,cbom-block-size = <64>; > > + riscv,cbop-block-size = <64>; > > + riscv,cboz-block-size = <64>; > > + mmu-type = "riscv,sv39"; > > + > > + cpu5_intc: interrupt-controller { > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + }; > > + }; > > + > > + cpu_6: cpu@6 { > > + compatible = "spacemit,x60", "riscv"; > > + device_type = "cpu"; > > + reg = <6>; > > + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt"; > > + riscv,isa-base = "rv64i"; > > + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", > > + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", > > + "zifencei", "zihintpause", "zihpm", "zfh", "zba", > > + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", > > + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; > > + riscv,cbom-block-size = <64>; > > + riscv,cbop-block-size = <64>; > > + riscv,cboz-block-size = <64>; > > + mmu-type = "riscv,sv39"; > > + > > + cpu6_intc: interrupt-controller { > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + }; > > + }; > > + > > + cpu_7: cpu@7 { > > + compatible = "spacemit,x60", "riscv"; > > + device_type = "cpu"; > > + reg = <7>; > > + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt"; > > + riscv,isa-base = "rv64i"; > > + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom", > > + "zicbop", "zicboz", "zicntr", "zicond", "zicsr", > > + "zifencei", "zihintpause", "zihpm", "zfh", "zba", > > + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt", > > + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt"; > > + riscv,cbom-block-size = <64>; > > + riscv,cbop-block-size = <64>; > > + riscv,cboz-block-size = <64>; > > + mmu-type = "riscv,sv39"; > > + > > + cpu7_intc: interrupt-controller { > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + }; > > + }; > > + > > + }; > > + > > + soc { > > + compatible = "simple-bus"; > > + interrupt-parent = <&plic>; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + dma-noncoherent; > > + ranges; > > + > > + uart0: serial@d4017000 { > > + compatible = "spacemit,k1-uart", "intel,xscale-uart"; > > no, this is not a correct hw modeling. The doc on spacemit says > all the uart support 64 bytes FIFO, declaring xscale only makes > use of 32 bytes FIFO. yes, I also noticed it's 64 bytes FIFO > > IIRC, 8250_pxa is a xscale uart with 64 bytes FIFO, so this should be > "mrvl,pxa-uart" or "mrvl,mmp-uart" for mrvl,pxa-uart, I think you imply to use drivers/tty/serial/8250/8250_pxa.c, which turn out doesn't work on k1 SoC, for the record, we need to adjust drivers/tty/serial/8250/Kconfig to enable the driver for ARCH_SPACEMIT, and change uart compatible to "spacemit,k1-uart", "mrvl,pxa-uart" for mrvl,mmp-uart, I see two choices, one using 8250_pxa.c which has same result as mrvl,pxa-uart, another choice would using the driver of 8250_of.c and it work as same as "intel,xscale-uart", I don't see any difference.. P.S: there is possibly a side problem that "mrvl,mmp-uart" from 8250_of.c doesn't really compatile with "mrvl,mmp-uart" from 8250_pxa.c, but I think it's another story > > > + reg = <0x0 0xd4017000 0x0 0x100>; > > + interrupts = <42>; > > + clock-frequency = <14857000>; > > once clk is ready, you will remove this property and add clk phandles, yes, this is exactly the plan > so why not bring clk, pinctrl, reset before hand? > No, we want to have an initial minimal working environment with initramfs + console, and start from there to work with clk, pinctrl, reset, it will help us to debug and work in parallel Note, I have no objection, if maintainer consider to merge this patch series on condition that clk, pinctrl, reset are also ready.. > > + reg-shift = <2>; > > + reg-io-width = <4>; > > + status = "disabled"; > > + }; > > + > > + uart2: serial@d4017100 { > > + compatible = "spacemit,k1-uart", "intel,xscale-uart"; > > + reg = <0x0 0xd4017100 0x0 0x100>; > > + interrupts = <44>; > > + clock-frequency = <14857000>; > > + reg-shift = <2>; > > + reg-io-width = <4>; > > + status = "disabled"; > > + }; > > + > > + uart3: serial@d4017200 { > > + compatible = "spacemit,k1-uart", "intel,xscale-uart"; > > + reg = <0x0 0xd4017200 0x0 0x100>; > > + interrupts = <45>; > > + clock-frequency = <14857000>; > > + reg-shift = <2>; > > + reg-io-width = <4>; > > + status = "disabled"; > > + }; > > + > > + uart4: serial@d4017300 { > > + compatible = "spacemit,k1-uart", "intel,xscale-uart"; > > + reg = <0x0 0xd4017300 0x0 0x100>; > > + interrupts = <46>; > > + clock-frequency = <14857000>; > > + reg-shift = <2>; > > + reg-io-width = <4>; > > + status = "disabled"; > > + }; > > + > > + uart5: serial@d4017400 { > > + compatible = "spacemit,k1-uart", "intel,xscale-uart"; > > + reg = <0x0 0xd4017400 0x0 0x100>; > > + interrupts = <47>; > > + clock-frequency = <14857000>; > > + reg-shift = <2>; > > + reg-io-width = <4>; > > + status = "disabled"; > > + }; > > + > > + uart6: serial@d4017500 { > > + compatible = "spacemit,k1-uart", "intel,xscale-uart"; > > + reg = <0x0 0xd4017500 0x0 0x100>; > > + interrupts = <48>; > > + clock-frequency = <14857000>; > > + reg-shift = <2>; > > + reg-io-width = <4>; > > + status = "disabled"; > > + }; > > + > > + uart7: serial@d4017600 { > > + compatible = "spacemit,k1-uart", "intel,xscale-uart"; > > + reg = <0x0 0xd4017600 0x0 0x100>; > > + interrupts = <49>; > > + clock-frequency = <14857000>; > > + reg-shift = <2>; > > + reg-io-width = <4>; > > + status = "disabled"; > > + }; > > + > > + uart8: serial@d4017700 { > > + compatible = "spacemit,k1-uart", "intel,xscale-uart"; > > + reg = <0x0 0xd4017700 0x0 0x100>; > > + interrupts = <50>; > > + clock-frequency = <14857000>; > > + reg-shift = <2>; > > + reg-io-width = <4>; > > + status = "disabled"; > > + }; > > + > > + uart9: serial@d4017800 { > > + compatible = "spacemit,k1-uart", "intel,xscale-uart"; > > + reg = <0x0 0xd4017800 0x0 0x100>; > > + interrupts = <51>; > > + clock-frequency = <14857000>; > > + reg-shift = <2>; > > + reg-io-width = <4>; > > + status = "disabled"; > > + }; > > + > > + plic: interrupt-controller@e0000000 { > > + compatible = "spacemit,k1-plic", "sifive,plic-1.0.0"; > > + reg = <0x0 0xe0000000 0x0 0x4000000>; > > + interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>, > > + <&cpu1_intc 11>, <&cpu1_intc 9>, > > + <&cpu2_intc 11>, <&cpu2_intc 9>, > > + <&cpu3_intc 11>, <&cpu3_intc 9>, > > + <&cpu4_intc 11>, <&cpu4_intc 9>, > > + <&cpu5_intc 11>, <&cpu5_intc 9>, > > + <&cpu6_intc 11>, <&cpu6_intc 9>, > > + <&cpu7_intc 11>, <&cpu7_intc 9>; > > + interrupt-controller; > > + #address-cells = <0>; > > + #interrupt-cells = <1>; > > + riscv,ndev = <159>; > > + }; > > + > > + clint: timer@e4000000 { > > + compatible = "spacemit,k1-clint", "sifive,clint0"; > > + reg = <0x0 0xe4000000 0x0 0x10000>; > > + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, > > + <&cpu1_intc 3>, <&cpu1_intc 7>, > > + <&cpu2_intc 3>, <&cpu2_intc 7>, > > + <&cpu3_intc 3>, <&cpu3_intc 7>, > > + <&cpu4_intc 3>, <&cpu4_intc 7>, > > + <&cpu5_intc 3>, <&cpu5_intc 7>, > > + <&cpu6_intc 3>, <&cpu6_intc 7>, > > + <&cpu7_intc 3>, <&cpu7_intc 7>; > > + }; > > + }; > > +}; > > > > -- > > 2.45.2 > > > > > > _______________________________________________ > > linux-riscv mailing list > > linux-riscv@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-riscv -- Yixun Lan (dlan) Gentoo Linux Developer GPG Key ID AABEFD55