Re: [PATCH v4 09/10] dt-bindings: opp: v2-qcom-level: Update minItems for oloop-vadj & cloop-vadj

[Rob Herring <robh@kernel.org>]

On Wed, Jul 03, 2024 at 02:46:50PM +0530, Varadarajan Narayanan wrote:
> Since IPQ9574 has only one CPR thread it will specify
> only one voltage adjustment value. Hence update min items
> accordingly for oloop-vadj and cloop-vadj. Without
> constraining min items, dt_binding_check gives errors
> 
> 	opp-table-cpr4:opp-0:qcom,opp-cloop-vadj:0: [0] is too short
> 	opp-table-cpr4:opp-0:qcom,opp-oloop-vadj:0: [0] is too short
> 
> 	Failed validating 'minItems' in schema . . .
> 		{'maxItems': 2, 'minItems': 2}
> 
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> v4: Fix dt_bindings_check error
> ---
>  Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml | 2 ++
>  1 file changed, 2 insertions(+)

This is going to need to be rolled into your dependency because it needs 
the same fix.

> 
> diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
> index b203ea01b17a..1c1a9e12d57a 100644
> --- a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
> +++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
> @@ -39,6 +39,7 @@ patternProperties:
>            An array of per-thread values representing the closed-loop
>            voltage adjustment value associated with this OPP node.
>          $ref: /schemas/types.yaml#/definitions/int32-array
> +        minItems: 1
>          maxItems: 2
>  
>        qcom,opp-oloop-vadj:
> @@ -46,6 +47,7 @@ patternProperties:
>            An array of per-thread values representing the open-loop
>            voltage adjustment value associated with this OPP node.
>          $ref: /schemas/types.yaml#/definitions/int32-array
> +        minItems: 1
>          maxItems: 2
>  
>      required:
> -- 
> 2.34.1
>