[RFC] arm64: dts: ti: introduce a minimal am642 device tree

* [RFC] arm64: dts: ti: introduce a minimal am642 device tree
@ 2022-03-21 15:54 Bryan Brattlof
  2022-03-22 18:14 ` Krzysztof Kozlowski
  2022-03-30 13:55 ` Wadim Egorov
  0 siblings, 2 replies; 11+ messages in thread
From: Bryan Brattlof @ 2022-03-21 15:54 UTC (permalink / raw)
  To: Nishanth Menon, Vignesh Raghavendra, Tero Kristo
  Cc: Rob Herring, Krzysztof Kozlowski, linux-arm-kernel, devicetree,
	linux-kernel, Bryan Brattlof

Texas Instrument's am642 is one of many k3 based, low cost, low power,
chips designed to work in a wide range of applications spanning an even
wider range of industries that TI is actively developing

With its pin-mux and peripheral rich designs, these chips will likely
have a multitude of custom device trees that range wildly from one
another and (hopefully) guarantee an influx of variants into the kernel
in the coming years

With overlays no longer a thing, I wanted to ask for opinions on how
we can best help integrate these dt files as they begin to be developed

I also wanted to introduce a skeletonized (nothing but uart) device tree
to give others a good starting point while developing their projects.

Let me know what you think :)

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 .../devicetree/bindings/arm/ti/k3.yaml        |   1 +
 arch/arm64/boot/dts/ti/Makefile               |   1 +
 arch/arm64/boot/dts/ti/k3-am642-skeleton.dts  | 335 ++++++++++++++++++
 3 files changed, 337 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-skeleton.dts

diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
index 61c6ab4f52e26..e65053d6465bd 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -55,6 +55,7 @@ properties:
       - description: K3 AM642 SoC
         items:
           - enum:
+              - ti,am642-generic
               - ti,am642-evm
               - ti,am642-sk
           - const: ti,am642
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 02e5d80344d00..df7bdf087558c 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb
 
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
 
+dtb-$(CONFIG_ARCH_K3) += k3-am642-skeleton.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
 
diff --git a/arch/arm64/boot/dts/ti/k3-am642-skeleton.dts b/arch/arm64/boot/dts/ti/k3-am642-skeleton.dts
new file mode 100644
index 0000000000000..2b789c9c25ced
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-skeleton.dts
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The absolute minimum DTS file needed for an AM642
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/k3.h>
+#include "k3-am642.dtsi"
+
+/ {
+	compatible = "ti,am642-generic", "ti,am642";
+	model = "Texas Instruments AM642 Generic";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
+	};
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000 0x00000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
+
+/* reserved for mcu firmware */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&mcu_i2c0 {
+	status = "disabled";
+};
+
+&mcu_i2c1 {
+	status = "disabled";
+};
+
+&mcu_gpio_intr {
+	status = "disabled";
+};
+
+&mcu_pmx0 {
+	status = "disabled";
+};
+
+&mcu_uart0 {
+	status = "disabled";
+};
+
+&mcu_uart1 {
+	status = "disabled";
+};
+
+&mcu_spi0 {
+	status = "disabled";
+};
+
+&mcu_spi1 {
+	status = "disabled";
+};
+
+/* dmss */
+
+&fss {
+	status = "disabled";
+};
+
+&main_mcan0 {
+	status = "disabled";
+};
+
+&main_mcan1 {
+	status = "disabled";
+};
+
+&usbss0 {
+	status = "disabled";
+};
+
+&cpsw3g {
+	status = "disabled";
+};
+
+&main_gpio0 {
+	status = "disabled";
+};
+
+&main_gpio1 {
+	status = "disabled";
+};
+
+&main_i2c0 {
+	status = "disabled";
+};
+
+&main_i2c1 {
+	status = "disabled";
+};
+
+&main_i2c2 {
+	status = "disabled";
+};
+
+&main_i2c3 {
+	status = "disabled";
+};
+
+&icssg0 {
+	status = "disabled";
+};
+
+&icssg1 {
+	status = "disabled";
+};
+
+/* gic500 */
+
+&main_gpio_intr {
+	status = "disabled";
+};
+
+&mailbox0_cluster2 {
+	status = "disabled";
+};
+
+&mailbox0_cluster3 {
+	status = "disabled";
+};
+
+&mailbox0_cluster4 {
+	status = "disabled";
+};
+
+&mailbox0_cluster5 {
+	status = "disabled";
+};
+
+&mailbox0_cluster6 {
+	status = "disabled";
+};
+
+&mailbox0_cluster7 {
+	status = "disabled";
+};
+
+&sdhci1 {
+	status = "disabled";
+};
+
+&sdhci0 {
+	status = "disabled";
+};
+
+&pcie0_ep {
+	status = "disabled";
+};
+
+&pcie0_rc {
+	status = "disabled";
+};
+
+&timesync_router {
+	status = "disabled";
+};
+
+&main_pmx0 {
+	/* (optional) for console */
+	main_uart0_pins_default: main-uart0-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0230, PIN_INPUT, 0)  /* (D15) UART0_RXD */
+			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
+		>;
+	};
+};
+
+&epwm0 {
+	status = "disabled";
+};
+
+&epwm1 {
+	status = "disabled";
+};
+
+&epwm2 {
+	status = "disabled";
+};
+
+&epwm3 {
+	status = "disabled";
+};
+
+&epwm4 {
+	status = "disabled";
+};
+
+&epwm5 {
+	status = "disabled";
+};
+
+&epwm6 {
+	status = "disabled";
+};
+
+&epwm7 {
+	status = "disabled";
+};
+
+&epwm8 {
+	status = "disabled";
+};
+
+&ecap0 {
+	status = "disabled";
+};
+
+&ecap1 {
+	status = "disabled";
+};
+
+&ecap2 {
+	status = "disabled";
+};
+
+&main_r5fss0 {
+	status = "disabled";
+};
+
+&main_r5fss1 {
+	status = "disabled";
+};
+
+/* (optional) for console */
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+/* reserved for firmware */
+&main_uart1 {
+	status = "reserved";
+};
+
+&main_uart2 {
+	status = "disabled";
+};
+
+&main_uart3 {
+	status = "disabled";
+};
+
+&main_uart4 {
+	status = "disabled";
+};
+
+&main_uart5 {
+	status = "disabled";
+};
+
+&main_uart6 {
+	status = "disabled";
+};
+
+&main_spi0 {
+	status = "disabled";
+};
+
+&main_spi1 {
+	status = "disabled";
+};
+
+&main_spi2 {
+	status = "disabled";
+};
+
+&main_spi3 {
+	status = "disabled";
+};
+
+&main_spi4 {
+	status = "disabled";
+};
+
+&hwspinlock {
+	status = "disabled";
+};
+
+/* oc_sram */
+
+&main_conf {
+	status = "disabled";
+};
+
+/* dmsc */
+
+&tscadc0 {
+	status = "disabled";
+};
+
+&serdes_wiz0 {
+	status = "disabled";
+};
+
+/* !cbass_main */
+
+/* transceiver1 */
+/* transceiver2 */
+
+&serdes_refclk {
+	status = "disabled";
+};
+
+&cluster0 {
+	/delete-node/ core1;
+};
+
+&pmu {
+	status = "disabled";
+};
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread