[PATCH V3 3/4] arm64: dts: allwinner: h616: Change RG35XX Series from r_rsb to r_i2c

[Chris Morgan <macroalpha82@gmail.com>]

From: Chris Morgan <macromorgan@hotmail.com>

Change the Anbernic RG35XX series to use the r_i2c bus for the PMIC
instead of the r_rsb bus. This is to keep the device tree consistent
as there are at least 3 devices (the RG35XX-SP, RG28XX, and RG40XX-H)
that have an external RTC on the r_i2c bus.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 .../boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
index ee30584b6ad7..e2bbd22bd80a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
@@ -201,12 +201,12 @@ &pio {
 	vcc-pi-supply = <&reg_cldo3>;
 };
 
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp717: pmic@3a3 {
+	axp717: pmic@34 {
 		compatible = "x-powers,axp717";
-		reg = <0x3a3>;
+		reg = <0x34>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
 		interrupt-parent = <&nmi_intc>;
-- 
2.34.1