[PATCH v3 0/2] leds: leds-pca995x: Add support for NXP PCA9956B

[Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@kernel.org>]

This series adds support for NXP PCA9956B to the pca995x driver. This
chip is similar to the others but has 24 instead of 16 outputs and a
slightly different register layout. Datasheet available at [1].

[1]: https://www.nxp.com/docs/en/data-sheet/PCA9956B.pdf

Signed-off-by: Pieterjan Camerlynck <pieterjanca@gmail.com>
---
Changes in v3:
- restore PCA995X_MAX_OUTPUTS and increase to 24
- restore secondary for loop in pca995x_probe()
- remove parenthesis around (chipdef->pwm_base)
- Link to v2: https://lore.kernel.org/r/20240710-pca995x-v2-0-8fafb6e4b7d5@gmail.com

Thank you for the review Marek Vasut.

Changes in v2:
- define seperate const struct pca995x_chipdef for each chip
- remove chip enum
- Link to v1: https://lore.kernel.org/r/20240710-pca995x-v1-0-545015603000@gmail.com

---
Pieterjan Camerlynck (2):
      dt-bindings: leds: pca995x: Add new nxp,pca9956b compatible
      leds: leds-pca995x: Add support for NXP PCA9956B

 .../devicetree/bindings/leds/nxp,pca995x.yaml      |  6 ++-
 drivers/leds/leds-pca995x.c                        | 59 ++++++++++++++--------
 2 files changed, 43 insertions(+), 22 deletions(-)
---
base-commit: 82d01fe6ee52086035b201cfa1410a3b04384257
change-id: 20240709-pca995x-d7c5f97f6ebc

Best regards,
-- 
Pieterjan Camerlynck <pieterjanca@gmail.com>