From: Liu Ying <victor.liu@nxp.com>
To: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org
Cc: p.zabel@pengutronix.de, airlied@gmail.com, daniel@ffwll.ch,
maarten.lankhorst@linux.intel.com, mripard@kernel.org,
tzimmermann@suse.de, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, tglx@linutronix.de,
vkoul@kernel.org, kishon@kernel.org, aisheng.dong@nxp.com,
agx@sigxcpu.org, francesco@dolcini.it, frank.li@nxp.com
Subject: [DO NOT MERGE PATCH v2 16/16] arm64: dts: imx8qxp-mek: Add MX8-DLVDS-LCD1 display module support
Date: Fri, 12 Jul 2024 17:32:43 +0800 [thread overview]
Message-ID: <20240712093243.2108456-17-victor.liu@nxp.com> (raw)
In-Reply-To: <20240712093243.2108456-1-victor.liu@nxp.com>
MX8-DLVDS-LCD1 display module integrates a KOE TX26D202VM0BWA LCD panel
and a touch IC. Add an overlay to support the LCD panel on i.MX8qxp
MEK. mipi_lvds_0_ldb channel0 and mipi_lvds_1_ldb channel1 send odd
and even pixels to the panel respectively.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
v2:
* New patch. (Francesco)
arch/arm64/boot/dts/freescale/Makefile | 4 +
.../imx8qxp-mek-mx8-dlvds-lcd1-lvds0-odd.dtso | 183 ++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 30 +++
3 files changed, 217 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-mek-mx8-dlvds-lcd1-lvds0-odd.dtso
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index f04c22b7de72..289e4b2b4f20 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -234,6 +234,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+
+imx8qxp-mek-mx8-dlvds-lcd1-lvds0-odd-dtbs += imx8qxp-mek.dtb imx8qxp-mek-mx8-dlvds-lcd1-lvds0-odd.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek-mx8-dlvds-lcd1-lvds0-odd.dtb
+
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek-mx8-dlvds-lcd1-lvds0-odd.dtso b/arch/arm64/boot/dts/freescale/imx8qxp-mek-mx8-dlvds-lcd1-lvds0-odd.dtso
new file mode 100644
index 000000000000..7ddd90e68754
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek-mx8-dlvds-lcd1-lvds0-odd.dtso
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+&{/} {
+ panel-lvds0 {
+ compatible = "koe,tx26d202vm0bwa";
+ backlight = <&backlight_lvds1>;
+ power-supply = <®_vcc_per_3v3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dual-lvds-odd-pixels;
+
+ panel_lvds0_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dual-lvds-even-pixels;
+
+ panel_lvds1_in: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+ };
+};
+
+&backlight_lvds1 {
+ status = "okay";
+};
+
+&dc0_framegen0 {
+ assigned-clocks = <&clk IMX_SC_R_DC_0_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_DC_0 IMX_SC_PM_CLK_MISC0>;
+ assigned-clock-parents = <0>,
+ <&clk IMX_SC_R_DC_0_PLL_0 IMX_SC_PM_CLK_PLL>;
+ assigned-clock-rates = <940320000>;
+};
+
+&dc0_pixel_link0 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ status = "okay";
+ };
+ };
+};
+
+&dc0_pc {
+ status = "okay";
+
+ channel@0 {
+ status = "okay";
+ };
+};
+
+&mipi_lvds_0_ldb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fsl,companion-ldb = <&mipi_lvds_1_ldb>;
+ status = "okay";
+
+ channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "okay";
+
+ port@1 {
+ reg = <1>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_lvds0_in>;
+ };
+ };
+ };
+};
+
+&mipi_lvds_0_phy {
+ status = "okay";
+};
+
+&mipi_lvds_0_pxl2dpi {
+ fsl,companion-pxl2dpi = <&mipi_lvds_1_pxl2dpi>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
+ status = "okay";
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+ status = "okay";
+ };
+ };
+ };
+};
+
+&mipi_lvds_1_ldb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ channel@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ status = "okay";
+
+ port@1 {
+ reg = <1>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_lvds1_in>;
+ };
+ };
+ };
+};
+
+&mipi_lvds_1_phy {
+ status = "okay";
+};
+
+&mipi_lvds_1_pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_mipi_lvds1>;
+ status = "okay";
+};
+
+&mipi_lvds_1_pxl2dpi {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mipi_lvds_1_pxl2dpi_dc0_pixel_link0: endpoint@1 {
+ status = "okay";
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_lvds_1_pxl2dpi_mipi_lvds_1_ldb_ch1: endpoint@1 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index bf88f189c6fe..6389c32eb910 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -16,11 +16,35 @@ chosen {
stdout-path = &lpuart0;
};
+ backlight_lvds1: backlight-lvds1 {
+ compatible = "pwm-backlight";
+ pwms = <&mipi_lvds_1_pwm 0 100000 0>;
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <100>;
+ power-supply = <®_vcc_12v0>;
+ status = "disabled";
+ };
+
memory@80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0 0x40000000>;
};
+ reg_vcc_12v0: regulator-vcc-12v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_12V0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ reg_vcc_per_3v3: regulator-vcc-per-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_PER_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_usdhc2_vmmc: usdhc2-vmmc {
compatible = "regulator-fixed";
regulator-name = "SD1_SPWR";
@@ -497,6 +521,12 @@ IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020
>;
};
+ pinctrl_pwm_mipi_lvds1: mipilvds1pwmgrp {
+ fsl,pins = <
+ IMX8QXP_MIPI_DSI1_GPIO0_00_MIPI_DSI1_PWM0_OUT 0x00000020
+ >;
+ };
+
pinctrl_typec: typecgrp {
fsl,pins = <
IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021
--
2.34.1
prev parent reply other threads:[~2024-07-12 9:26 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-12 9:32 [PATCH v2 00/16] Add Freescale i.MX8qxp Display Controller support Liu Ying
2024-07-12 9:32 ` [PATCH v2 01/16] dt-bindings: display: imx: Add some i.MX8qxp Display Controller processing units Liu Ying
2024-07-22 22:38 ` Rob Herring
2024-07-23 9:49 ` Liu Ying
2024-07-12 9:32 ` [PATCH v2 02/16] dt-bindings: display: imx: Add i.MX8qxp Display Controller display engine Liu Ying
2024-07-22 22:57 ` Rob Herring
2024-07-23 9:51 ` Liu Ying
2024-07-12 9:32 ` [PATCH v2 03/16] dt-bindings: display: imx: Add i.MX8qxp Display Controller pixel engine Liu Ying
2024-07-12 9:32 ` [PATCH v2 04/16] dt-bindings: interrupt-controller: Add i.MX8qxp Display Controller interrupt controller Liu Ying
2024-07-22 23:06 ` Rob Herring (Arm)
2024-07-12 9:32 ` [PATCH v2 05/16] dt-bindings: display: imx: Add i.MX8qxp Display Controller Liu Ying
2024-07-12 9:32 ` [PATCH v2 06/16] drm/imx: Add i.MX8qxp Display Controller display engine Liu Ying
2024-07-27 16:11 ` Dmitry Baryshkov
2024-07-30 6:25 ` Liu Ying
2024-07-31 11:54 ` Dmitry Baryshkov
2024-08-05 3:23 ` Liu Ying
2024-07-12 9:32 ` [PATCH v2 07/16] drm/imx: Add i.MX8qxp Display Controller pixel engine Liu Ying
2024-07-27 16:13 ` Dmitry Baryshkov
2024-07-30 6:55 ` Liu Ying
2024-07-30 7:44 ` Krzysztof Kozlowski
2024-07-30 9:42 ` Liu Ying
2024-07-30 10:20 ` Krzysztof Kozlowski
2024-07-31 5:53 ` Liu Ying
2024-07-12 9:32 ` [PATCH v2 08/16] drm/imx: Add i.MX8qxp Display Controller interrupt controller Liu Ying
2024-07-12 9:32 ` [PATCH v2 09/16] drm/imx: Add i.MX8qxp Display Controller KMS Liu Ying
2024-07-12 9:55 ` Markus Elfring
2024-07-27 16:30 ` Dmitry Baryshkov
2024-07-30 8:31 ` Liu Ying
2024-07-31 13:51 ` Dmitry Baryshkov
2024-08-05 5:01 ` Liu Ying
2024-07-12 9:32 ` [PATCH v2 10/16] MAINTAINERS: Add maintainer for i.MX8qxp Display Controller Liu Ying
2024-07-12 9:32 ` [DO NOT MERGE PATCH v2 11/16] dt-bindings: phy: mixel,mipi-dsi-phy: Allow assigned-clock* properties Liu Ying
2024-07-22 23:09 ` Rob Herring
2024-07-23 10:00 ` Liu Ying
2024-07-12 9:32 ` [DO NOT MERGE PATCH v2 12/16] dt-bindings: firmware: imx: Add SCU controlled display pixel link nodes Liu Ying
2024-07-12 9:32 ` [DO NOT MERGE PATCH v2 13/16] arm64: dts: imx8qxp: Add display controller subsystem Liu Ying
2024-07-12 9:32 ` [DO NOT MERGE PATCH v2 14/16] arm64: dts: imx8qxp: Add MIPI-LVDS combo subsystems Liu Ying
2024-07-12 9:32 ` [DO NOT MERGE PATCH v2 15/16] arm64: dts: imx8qxp-mek: Enable display controller Liu Ying
2024-07-12 9:32 ` Liu Ying [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240712093243.2108456-17-victor.liu@nxp.com \
--to=victor.liu@nxp.com \
--cc=agx@sigxcpu.org \
--cc=airlied@gmail.com \
--cc=aisheng.dong@nxp.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=festevam@gmail.com \
--cc=francesco@dolcini.it \
--cc=frank.li@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tglx@linutronix.de \
--cc=tzimmermann@suse.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).