From: Frank Li <Frank.Li@nxp.com>
To: krzk@kernel.org
Cc: Frank.Li@nxp.com, alexandre.belloni@bootlin.com,
conor+dt@kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, krzk+dt@kernel.org,
linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org,
miquel.raynal@bootlin.com, robh@kernel.org
Subject: [PATCH v2 1/1] dt-bindings: i3c: add header for generic I3C flags
Date: Mon, 15 Jul 2024 18:53:51 -0400 [thread overview]
Message-ID: <20240715225351.3237284-1-Frank.Li@nxp.com> (raw)
From: Carlos Song <carlos.song@nxp.com>
Add header file for generic I3C flags to avoid hard code in dts file.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <frank.li@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v1 to v2
- use full path for include header
- s/MIT/BSD-2-Clause/
---
Documentation/devicetree/bindings/i3c/i3c.yaml | 5 ++++-
MAINTAINERS | 1 +
include/dt-bindings/i3c/i3c.h | 16 ++++++++++++++++
3 files changed, 21 insertions(+), 1 deletion(-)
create mode 100644 include/dt-bindings/i3c/i3c.h
diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml
index 113957ebe9f1d..e25fa72fd7857 100644
--- a/Documentation/devicetree/bindings/i3c/i3c.yaml
+++ b/Documentation/devicetree/bindings/i3c/i3c.yaml
@@ -91,6 +91,7 @@ patternProperties:
- const: 0
- description: |
Shall encode the I3C LVR (Legacy Virtual Register):
+ See include/dt-bindings/i3c/i3c.h
bit[31:8]: unused/ignored
bit[7:5]: I2C device index. Possible values:
* 0: I2C device has a 50 ns spike filter
@@ -153,6 +154,8 @@ additionalProperties: true
examples:
- |
+ #include <dt-bindings/i3c/i3c.h>
+
i3c@d040000 {
compatible = "cdns,i3c-master";
clocks = <&coreclock>, <&i3csysclock>;
@@ -166,7 +169,7 @@ examples:
/* I2C device. */
eeprom@57 {
compatible = "atmel,24c01";
- reg = <0x57 0x0 0x10>;
+ reg = <0x57 0x0 (I2C_FM | I2C_FILTER)>;
pagesize = <0x8>;
};
diff --git a/MAINTAINERS b/MAINTAINERS
index 3c4fdf74a3f9d..f0ce22e04d467 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10479,6 +10479,7 @@ F: Documentation/ABI/testing/sysfs-bus-i3c
F: Documentation/devicetree/bindings/i3c/
F: Documentation/driver-api/i3c
F: drivers/i3c/
+F: include/dt-bindings/i3c/
F: include/linux/i3c/
IBM Operation Panel Input Driver
diff --git a/include/dt-bindings/i3c/i3c.h b/include/dt-bindings/i3c/i3c.h
new file mode 100644
index 0000000000000..373439218bba6
--- /dev/null
+++ b/include/dt-bindings/i3c/i3c.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef _DT_BINDINGS_I3C_I3C_H
+#define _DT_BINDINGS_I3C_I3C_H
+
+#define I2C_FM (1 << 4)
+#define I2C_FM_PLUS (0 << 4)
+
+#define I2C_FILTER (0 << 5)
+#define I2C_NO_FILTER_HIGH_FREQUENCY (1 << 5)
+#define I2C_NO_FILTER_LOW_FREQUENCY (2 << 5)
+
+#endif
--
2.34.1
next reply other threads:[~2024-07-15 22:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-15 22:53 Frank Li [this message]
2024-07-16 6:17 ` [PATCH v2 1/1] dt-bindings: i3c: add header for generic I3C flags Krzysztof Kozlowski
2024-07-23 23:51 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240715225351.3237284-1-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).