[PATCH net-next 2/2] dt-bindings: net: dsa: vsc73xx: add {rx,tx}-internal-delay-ps

[Pawel Dembicki <paweldembicki@gmail.com>]

Add a schema validator to vitesse,vsc73xx.yaml for MAC-level RGMII delays
in the CPU port. Additionally, valid values for VSC73XX were defined,
and a common definition for the RX and TX valid range was created.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
 .../bindings/net/dsa/vitesse,vsc73xx.yaml     | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml
index b99d7a694b70..f0fb31ad5d60 100644
--- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml
@@ -52,6 +52,25 @@ properties:
 allOf:
   - $ref: dsa.yaml#/$defs/ethernet-ports
 
+patternProperties:
+  "^(ethernet-)?ports$":
+    additionalProperties: true
+    patternProperties:
+      "^(ethernet-)?port@6$":
+        allOf:
+          - if:
+              properties:
+                phy-mode:
+                  contains:
+                    enum:
+                      - rgmii
+            then:
+              properties:
+                rx-internal-delay-ps:
+                  $ref: "#/$defs/internal-delay-ps"
+                tx-internal-delay-ps:
+                  $ref: "#/$defs/internal-delay-ps"
+
 # This checks if reg is a chipselect so the device is on an SPI
 # bus, the if-clause will fail if reg is a tuple such as for a
 # platform device.
@@ -67,6 +86,14 @@ required:
   - compatible
   - reg
 
+$defs:
+  internal-delay-ps:
+    description:
+      Disable tunable delay lines using 0 ps, or enable them and select
+      the phase between 1400 ps and 2000 ps in increments of 300 ps.
+    enum:
+      [0, 1400, 1700, 2000]
+
 unevaluatedProperties: false
 
 examples:
@@ -108,6 +135,8 @@ examples:
             reg = <6>;
             ethernet = <&gmac1>;
             phy-mode = "rgmii";
+            rx-internal-delay-ps = <0>;
+            tx-internal-delay-ps = <0>;
             fixed-link {
               speed = <1000>;
               full-duplex;
@@ -150,6 +179,8 @@ examples:
           ethernet-port@6 {
             reg = <6>;
             ethernet = <&enet0>;
+            rx-internal-delay-ps = <0>;
+            tx-internal-delay-ps = <0>;
             phy-mode = "rgmii";
             fixed-link {
               speed = <1000>;
-- 
2.34.1