From: Tomer Maimon <tmaimon77@gmail.com>
To: <linus.walleij@linaro.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<avifishman70@gmail.com>, <tali.perry1@gmail.com>,
<joel@jms.id.au>, <venture@google.com>, <yuenn@google.com>,
<benjaminfair@google.com>
Cc: <openbmc@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>,
Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v2 1/7] dt-bindings: pinctrl: npcm8xx: remove non-existent groups and functions
Date: Tue, 16 Jul 2024 22:40:02 +0300 [thread overview]
Message-ID: <20240716194008.3502068-2-tmaimon77@gmail.com> (raw)
In-Reply-To: <20240716194008.3502068-1-tmaimon77@gmail.com>
Remove non-existent smb4den and lpcclk groups and functions from Nuvoton
NPCM8XX Pin controller binding documentation.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
.../pinctrl/nuvoton,npcm845-pinctrl.yaml | 70 +++++++++----------
1 file changed, 34 insertions(+), 36 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
index 814b9598edd1..8cd1f442240e 100644
--- a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
@@ -71,51 +71,49 @@ patternProperties:
One or more groups of pins to mux to a certain function
items:
enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
- smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b,
- smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
- smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3,
- spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2,
- spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2,
- bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen,
- r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3,
- fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
- fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2,
- pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2,
- ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2,
- smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
- sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
- mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
- scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c,
- smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2,
- spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio,
- wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0,
- hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4,
- bu4b, bu5, bu5b, bu6, gpo187 ]
+ smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4b, smb4c, smb15,
+ smb16, smb17, smb18, smb19, smb20, smb21, smb22, smb23,
+ smb23b, smb4d, smb14, smb5, smb4, smb3, spi0cs1, spi0cs2,
+ spi0cs3, spi1cs0, spi1cs1, spi1cs2, spi1cs3, spi1cs23, smb3c,
+ smb3b, bmcuart0a, uart1, jtag2, bmcuart1, uart2, sg1mdio,
+ bmcuart0b, r1err, r1md, r1oen, r2oen, rmii3, r3oen, smb3d,
+ fanin0, fanin1, fanin2, fanin3, fanin4, fanin5, fanin6,
+ fanin7, fanin8, fanin9, fanin10, fanin11, fanin12, fanin13,
+ fanin14, fanin15, pwm0, pwm1, pwm2, pwm3, r2, r2err, r2md,
+ r3rxer, ga20kbc, smb5d, lpc, espi, rg2, ddr, i3c0, i3c1,
+ i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2, smb2c, smb2b, smb1c,
+ smb1b, smb8, smb9, smb10, smb11, sd1, sd1pwr, pwm4, pwm5,
+ pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd,
+ mmcrst, clkout, serirq, scipme, smi, smb6, smb6b, smb6c,
+ smb6d, smb7, smb7b, smb7c, smb7d, spi1, faninx, r1, spi3,
+ spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c,
+ smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13,
+ spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4,
+ hgpio5, hgpio6, hgpio7, bu4, bu4b, bu5, bu5b, bu6, gpo187 ]
function:
description:
The function that a group of pins is muxed to
- enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
- smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b,
- smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
- smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3,
- spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2,
- spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2,
- bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen,
- r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3,
- fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
+ enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi, smb5b,
+ smb5c, lkgpo0, pspi, jm1, jm2, smb4b, smb4c, smb15, smb16,
+ smb17, smb18, smb19, smb20, smb21, smb22, smb23, smb23b, smb4d,
+ smb14, smb5, smb4, smb3, spi0cs1, spi0cs2, spi0cs3, spi1cs0,
+ spi1cs1, spi1cs2, spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a,
+ uart1, jtag2, bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md,
+ r1oen, r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2,
+ fanin3, fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2,
pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2,
ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2,
smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
- mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
- scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c,
- smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2,
- spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio,
- wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0,
- hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4,
- bu4b, bu5, bu5b, bu6, gpo187 ]
+ mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, scipme, smi,
+ smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c, smb7d, spi1,
+ faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi,
+ smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2,
+ smb12, smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2,
+ hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4, bu4b, bu5, bu5b,
+ bu6, gpo187 ]
dependencies:
groups: [ function ]
--
2.34.1
next prev parent reply other threads:[~2024-07-16 20:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-16 19:40 [PATCH v2 0/7] pinctrl: npcm8xx: pin configuration changes Tomer Maimon
2024-07-16 19:40 ` Tomer Maimon [this message]
2024-07-23 2:26 ` [PATCH v2 1/7] dt-bindings: pinctrl: npcm8xx: remove non-existent groups and functions Rob Herring (Arm)
2024-08-05 7:33 ` Linus Walleij
2024-07-16 19:40 ` [PATCH v2 2/7] pinctrl: nuvoton: npcm8xx: remove non-existent pins, groups, functions Tomer Maimon
2024-07-16 19:40 ` [PATCH v2 3/7] pinctrl: nuvoton: npcm8xx: clear polarity before set both edge Tomer Maimon
2024-07-16 19:40 ` [PATCH v2 4/7] pinctrl: nuvoton: npcm8xx: add gpi35 and gpi36 Tomer Maimon
2024-07-16 19:40 ` [PATCH v2 5/7] pinctrl: nuvoton: npcm8xx: add pin 250 to DDR pins group Tomer Maimon
2024-07-16 19:40 ` [PATCH v2 6/7] pinctrl: nuvoton: npcm8xx: modify clkrun and serirq pin configuration Tomer Maimon
2024-07-16 19:40 ` [PATCH v2 7/7] pinctrl: nuvoton: npcm8xx: modify pins flags Tomer Maimon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240716194008.3502068-2-tmaimon77@gmail.com \
--to=tmaimon77@gmail.com \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh@kernel.org \
--cc=tali.perry1@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).