From: Tomer Maimon <tmaimon77@gmail.com>
To: <linus.walleij@linaro.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<avifishman70@gmail.com>, <tali.perry1@gmail.com>,
<joel@jms.id.au>, <venture@google.com>, <yuenn@google.com>,
<benjaminfair@google.com>
Cc: <openbmc@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>,
Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v2 4/7] pinctrl: nuvoton: npcm8xx: add gpi35 and gpi36
Date: Tue, 16 Jul 2024 22:40:05 +0300 [thread overview]
Message-ID: <20240716194008.3502068-5-tmaimon77@gmail.com> (raw)
In-Reply-To: <20240716194008.3502068-1-tmaimon77@gmail.com>
This patch adds support for GPIO pins GPI35 and GPI36 on the Nuvoton
NPCM8xx BMC SoC.
The pins are configured for only for input.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c b/drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c
index 7985400de12a..4e02d1a68f39 100644
--- a/drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c
+++ b/drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c
@@ -316,8 +316,8 @@ static struct irq_chip npcmgpio_irqchip = {
GPIOCHIP_IRQ_RESOURCE_HELPERS,
};
-static const int gpi36_pins[] = { 58 };
-static const int gpi35_pins[] = { 58 };
+static const int gpi36_pins[] = { 36 };
+static const int gpi35_pins[] = { 35 };
static const int tp_jtag3_pins[] = { 44, 62, 45, 46 };
static const int tp_uart_pins[] = { 50, 51 };
@@ -1358,6 +1358,8 @@ static const struct npcm8xx_pincfg pincfg[] = {
NPCM8XX_PINCFG(32, spi0cs1, MFSEL1, 3, smb14b, MFSEL7, 26, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
NPCM8XX_PINCFG(33, i3c4, MFSEL6, 10, none, NONE, 0, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
NPCM8XX_PINCFG(34, i3c4, MFSEL6, 10, none, NONE, 0, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
+ NPCM8XX_PINCFG(35, gpi35, MFSEL5, 16, none, NONE, 0, none, NONE, 0, none, NONE, 0, none, NONE, 0, 0),
+ NPCM8XX_PINCFG(36, gpi36, MFSEL5, 18, none, NONE, 0, none, NONE, 0, none, NONE, 0, none, NONE, 0, 0),
NPCM8XX_PINCFG(37, smb3c, I2CSEGSEL, 12, smb23, MFSEL5, 31, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
NPCM8XX_PINCFG(38, smb3c, I2CSEGSEL, 12, smb23, MFSEL5, 31, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
NPCM8XX_PINCFG(39, smb3b, I2CSEGSEL, 11, smb22, MFSEL5, 30, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
@@ -1603,6 +1605,8 @@ static const struct pinctrl_pin_desc npcm8xx_pins[] = {
PINCTRL_PIN(32, "GPIO32/SMB14B_SCL/SPI0_nCS1"),
PINCTRL_PIN(33, "GPIO33/I3C4_SCL"),
PINCTRL_PIN(34, "GPIO34/I3C4_SDA"),
+ PINCTRL_PIN(35, "MCBPCK/GPI35_AHB2PCI_DIS"),
+ PINCTRL_PIN(36, "SYSBPCK/GPI36"),
PINCTRL_PIN(37, "GPIO37/SMB3C_SDA/SMB23_SDA"),
PINCTRL_PIN(38, "GPIO38/SMB3C_SCL/SMB23_SCL"),
PINCTRL_PIN(39, "GPIO39/SMB3B_SDA/SMB22_SDA"),
@@ -2037,7 +2041,7 @@ static int npcm8xx_gpio_request_enable(struct pinctrl_dev *pctldev,
const unsigned int *pin = &offset;
int mode = fn_gpio;
- if (pin[0] >= 183 && pin[0] <= 189)
+ if ((pin[0] >= 183 && pin[0] <= 189) || pin[0] == 35 || pin[0] == 36)
mode = pincfg[pin[0]].fn0;
npcm8xx_setfunc(npcm->gcr_regmap, &offset, 1, mode);
--
2.34.1
next prev parent reply other threads:[~2024-07-16 20:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-16 19:40 [PATCH v2 0/7] pinctrl: npcm8xx: pin configuration changes Tomer Maimon
2024-07-16 19:40 ` [PATCH v2 1/7] dt-bindings: pinctrl: npcm8xx: remove non-existent groups and functions Tomer Maimon
2024-07-23 2:26 ` Rob Herring (Arm)
2024-08-05 7:33 ` Linus Walleij
2024-07-16 19:40 ` [PATCH v2 2/7] pinctrl: nuvoton: npcm8xx: remove non-existent pins, groups, functions Tomer Maimon
2024-07-16 19:40 ` [PATCH v2 3/7] pinctrl: nuvoton: npcm8xx: clear polarity before set both edge Tomer Maimon
2024-07-16 19:40 ` Tomer Maimon [this message]
2024-07-16 19:40 ` [PATCH v2 5/7] pinctrl: nuvoton: npcm8xx: add pin 250 to DDR pins group Tomer Maimon
2024-07-16 19:40 ` [PATCH v2 6/7] pinctrl: nuvoton: npcm8xx: modify clkrun and serirq pin configuration Tomer Maimon
2024-07-16 19:40 ` [PATCH v2 7/7] pinctrl: nuvoton: npcm8xx: modify pins flags Tomer Maimon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240716194008.3502068-5-tmaimon77@gmail.com \
--to=tmaimon77@gmail.com \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh@kernel.org \
--cc=tali.perry1@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).