[PATCH v2 1/2] ARM: dts: broadcom: bcm21664: Move chosen node into Garnet DTS

[Artur Weber <aweber.kernel@gmail.com>]

The serial console settings in the chosen node are device-specific,
not SoC-specific. Move the chosen node out of bcm21664.dtsi and into
the only DTS that uses it, bcm21664-garnet.dts.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
 arch/arm/boot/dts/broadcom/bcm21664-garnet.dts | 4 ++++
 arch/arm/boot/dts/broadcom/bcm21664.dtsi       | 4 ----
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts
index 8789fae178bf..4f8ddc1b3ab7 100644
--- a/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts
+++ b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts
@@ -11,6 +11,10 @@ / {
 	model = "BCM21664 Garnet board";
 	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
 
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
diff --git a/arch/arm/boot/dts/broadcom/bcm21664.dtsi b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
index fa73600e883e..c1ad5123bad4 100644
--- a/arch/arm/boot/dts/broadcom/bcm21664.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
@@ -12,10 +12,6 @@ / {
 	compatible = "brcm,bcm21664";
 	interrupt-parent = <&gic>;
 
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;

-- 
2.45.2