[PATCH 1/2] arm64: dts: imx8-ss-dma: add #address-cells and #size-cells to LPI2C nodes

[Alexander Stein <alexander.stein@ew.tq-group.com>]

These properties are required by i2c-controller.yaml bindings.
Add them on SoC level, rather than on board level.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index f7a91d43a0ffe..3f521441faf7e 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -303,6 +303,8 @@ adma_pwm_lpcg: clock-controller@5a590000 {
 
 	i2c0: i2c@5a800000 {
 		reg = <0x5a800000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>,
 			 <&i2c0_lpcg IMX_LPCG_CLK_4>;
@@ -315,6 +317,8 @@ i2c0: i2c@5a800000 {
 
 	i2c1: i2c@5a810000 {
 		reg = <0x5a810000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>,
 			 <&i2c1_lpcg IMX_LPCG_CLK_4>;
@@ -327,6 +331,8 @@ i2c1: i2c@5a810000 {
 
 	i2c2: i2c@5a820000 {
 		reg = <0x5a820000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>,
 			 <&i2c2_lpcg IMX_LPCG_CLK_4>;
@@ -339,6 +345,8 @@ i2c2: i2c@5a820000 {
 
 	i2c3: i2c@5a830000 {
 		reg = <0x5a830000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>,
 			 <&i2c3_lpcg IMX_LPCG_CLK_4>;
-- 
2.34.1