From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH 1/4] arm64: dts: qcom: msm8998-lenovo-miix-630: enable touchscreen
Date: Mon, 22 Jul 2024 14:57:18 +0300 [thread overview]
Message-ID: <20240722-miix630-support-v1-1-a6483cfe8674@linaro.org> (raw)
In-Reply-To: <20240722-miix630-support-v1-0-a6483cfe8674@linaro.org>
There is no point in keeping touchscreen disabled, enable corresponding
i2c-hid device.
04F3:2608 Touchscreen as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input1
04F3:2608 as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input2
04F3:2608 as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input3
04F3:2608 Stylus as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input4
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../boot/dts/qcom/msm8998-lenovo-miix-630.dts | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
index a105143bee4a..118c55f5bcfd 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
@@ -11,6 +11,24 @@ / {
chassis-type = "convertible";
};
+&blsp1_i2c5 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ tsc1: hid@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ hid-descr-addr = <0x1>;
+
+ interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&i2c5_hid_active>;
+ pinctrl-names = "default";
+
+ wakeup-source;
+ };
+};
+
&blsp1_i2c6 {
status = "okay";
@@ -35,3 +53,13 @@ &remoteproc_mss {
&sdhc2 {
cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
};
+
+&tlmm {
+ i2c5_hid_active: i2c5-hid-active-state {
+ pins = "gpio125";
+ function = "gpio";
+
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+};
--
2.39.2
next prev parent reply other threads:[~2024-07-22 11:57 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-22 11:57 [PATCH 0/4] arm64: dts: qcom: improve Lenovo Miix 630 support Dmitry Baryshkov
2024-07-22 11:57 ` Dmitry Baryshkov [this message]
2024-07-22 23:22 ` [PATCH 1/4] arm64: dts: qcom: msm8998-lenovo-miix-630: enable touchscreen Konrad Dybcio
2024-07-23 1:09 ` Dmitry Baryshkov
2024-07-23 10:01 ` Konrad Dybcio
2024-07-23 10:33 ` Dmitry Baryshkov
2024-07-22 11:57 ` [PATCH 2/4] arm64: dts: qcom: msm8998-lenovo-miix-630: enable aDSP and SLPI Dmitry Baryshkov
2024-07-22 23:23 ` Konrad Dybcio
2024-07-22 11:57 ` [PATCH 3/4] arm64: dts: qcom: msm8998-lenovo-miix-630: enable VolumeUp button Dmitry Baryshkov
2024-07-22 23:24 ` Konrad Dybcio
2024-07-23 11:11 ` Dmitry Baryshkov
2024-07-23 11:15 ` Dmitry Baryshkov
2024-07-22 11:57 ` [PATCH 4/4] arm64: dts: qcom: msm8998-clamshell: enable resin/VolDown Dmitry Baryshkov
2024-07-22 23:24 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240722-miix630-support-v1-1-a6483cfe8674@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_jhugo@quicinc.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).