From: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
To: Chester Lin <chester62515@gmail.com>,
Matthias Brugger <mbrugger@suse.com>,
Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
NXP S32 Linux Team <s32@nxp.com>,
Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
Subject: [PATCH v2] arm64: dts: s32g: add the pinctrl node
Date: Wed, 24 Jul 2024 16:24:15 +0300 [thread overview]
Message-ID: <20240724132415.1700386-1-andrei.stefanescu@oss.nxp.com> (raw)
Add the pinctrl node in the device tree in order to enable the
S32G2/S32G3 pinctrl driver to probe.
Signed-off-by: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
---
V2 -> V1: moved the pinctrl node before the uart1 one to sort based
on the reg value, removed the status property, renamed the
jtag_pins node and jtag_grp* subnodes
arch/arm64/boot/dts/freescale/s32g2.dtsi | 50 +++++++++++++++++++++++
arch/arm64/boot/dts/freescale/s32g3.dtsi | 52 +++++++++++++++++++++++-
2 files changed, 101 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index fc19ae2e8d3b..fa054bfe7d5c 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -114,6 +114,56 @@ soc@0 {
#size-cells = <1>;
ranges = <0 0 0 0x80000000>;
+ pinctrl: pinctrl@4009c240 {
+ compatible = "nxp,s32g2-siul2-pinctrl";
+ /* MSCR0-MSCR101 registers on siul2_0 */
+ reg = <0x4009c240 0x198>,
+ /* MSCR112-MSCR122 registers on siul2_1 */
+ <0x44010400 0x2c>,
+ /* MSCR144-MSCR190 registers on siul2_1 */
+ <0x44010480 0xbc>,
+ /* IMCR0-IMCR83 registers on siul2_0 */
+ <0x4009ca40 0x150>,
+ /* IMCR119-IMCR397 registers on siul2_1 */
+ <0x44010c1c 0x45c>,
+ /* IMCR430-IMCR495 registers on siul2_1 */
+ <0x440110f8 0x108>;
+
+ jtag_pins: jtag-pins {
+ jtag-grp0 {
+ pinmux = <0x0>;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <166>;
+ };
+
+ jtag-grp1 {
+ pinmux = <0x11>;
+ slew-rate = <166>;
+ };
+
+ jtag-grp2 {
+ pinmux = <0x40>;
+ input-enable;
+ bias-pull-down;
+ slew-rate = <166>;
+ };
+
+ jtag-grp3 {
+ pinmux = <0x23c0>,
+ <0x23d0>,
+ <0x2320>;
+ };
+
+ jtag-grp4 {
+ pinmux = <0x51>;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <166>;
+ };
+ };
+ };
+
uart0: serial@401c8000 {
compatible = "nxp,s32g2-linflexuart",
"fsl,s32v234-linflexuart";
diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
index c1b08992754b..b4226a9143c8 100644
--- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright 2021-2023 NXP
+ * Copyright 2021-2024 NXP
*
* Authors: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
* Ciprian Costea <ciprianmarian.costea@nxp.com>
@@ -171,6 +171,56 @@ soc@0 {
#size-cells = <1>;
ranges = <0 0 0 0x80000000>;
+ pinctrl: pinctrl@4009c240 {
+ compatible = "nxp,s32g2-siul2-pinctrl";
+ /* MSCR0-MSCR101 registers on siul2_0 */
+ reg = <0x4009c240 0x198>,
+ /* MSCR112-MSCR122 registers on siul2_1 */
+ <0x44010400 0x2c>,
+ /* MSCR144-MSCR190 registers on siul2_1 */
+ <0x44010480 0xbc>,
+ /* IMCR0-IMCR83 registers on siul2_0 */
+ <0x4009ca40 0x150>,
+ /* IMCR119-IMCR397 registers on siul2_1 */
+ <0x44010c1c 0x45c>,
+ /* IMCR430-IMCR495 registers on siul2_1 */
+ <0x440110f8 0x108>;
+
+ jtag_pins: jtag-pins {
+ jtag-grp0 {
+ pinmux = <0x0>;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <166>;
+ };
+
+ jtag-grp1 {
+ pinmux = <0x11>;
+ slew-rate = <166>;
+ };
+
+ jtag-grp2 {
+ pinmux = <0x40>;
+ input-enable;
+ bias-pull-down;
+ slew-rate = <166>;
+ };
+
+ jtag-grp3 {
+ pinmux = <0x23c0>,
+ <0x23d0>,
+ <0x2320>;
+ };
+
+ jtag-grp4 {
+ pinmux = <0x51>;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <166>;
+ };
+ };
+ };
+
uart0: serial@401c8000 {
compatible = "nxp,s32g3-linflexuart",
"fsl,s32v234-linflexuart";
--
2.45.2
next reply other threads:[~2024-07-24 13:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-24 13:24 Andrei Stefanescu [this message]
2024-07-26 16:53 ` [PATCH v2] arm64: dts: s32g: add the pinctrl node Matthias Brugger
2024-08-13 2:00 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240724132415.1700386-1-andrei.stefanescu@oss.nxp.com \
--to=andrei.stefanescu@oss.nxp.com \
--cc=chester62515@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=ghennadi.procopciuc@oss.nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mbrugger@suse.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=s32@nxp.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox