[PATCH 3/5] arm64: dts: rockchip: Pull up sdio pins on RK3588

[Chris Morgan <macroalpha82@gmail.com>]

From: Chris Morgan <macromorgan@hotmail.com>

When using an Ampak derived bcm43456 on an RK3588s based GameForce Ace
the WiFi failed to work properly until I set the SDIO pins from
pull-none to pull-up. This matches the vendor kernel located at [1].
I tested this then on an RK3588s based Indiedroid Nova and did not
observe any adverse effects.

[1] https://github.com/rockchip-linux/kernel/commit/b96485b7af46a99c14f3c4818eb18c7836eb809c

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
index 30db12c4fc82..d1368418502a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
@@ -2449,15 +2449,15 @@ sdiom1_pins: sdiom1-pins {
 				/* sdio_clk_m1 */
 				<3 RK_PA5 2 &pcfg_pull_none>,
 				/* sdio_cmd_m1 */
-				<3 RK_PA4 2 &pcfg_pull_none>,
+				<3 RK_PA4 2 &pcfg_pull_up>,
 				/* sdio_d0_m1 */
-				<3 RK_PA0 2 &pcfg_pull_none>,
+				<3 RK_PA0 2 &pcfg_pull_up>,
 				/* sdio_d1_m1 */
-				<3 RK_PA1 2 &pcfg_pull_none>,
+				<3 RK_PA1 2 &pcfg_pull_up>,
 				/* sdio_d2_m1 */
-				<3 RK_PA2 2 &pcfg_pull_none>,
+				<3 RK_PA2 2 &pcfg_pull_up>,
 				/* sdio_d3_m1 */
-				<3 RK_PA3 2 &pcfg_pull_none>;
+				<3 RK_PA3 2 &pcfg_pull_up>;
 		};
 	};
 
-- 
2.34.1