[PATCH v6 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface

[Julien Stephan <jstephan@baylibre.com>]

From: Louis Kuo <louis.kuo@mediatek.com>

This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in
some Mediatek SoC, such as the mt8365

Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
Signed-off-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
---
 .../bindings/media/mediatek,mt8365-seninf.yaml     | 259 +++++++++++++++++++++
 MAINTAINERS                                        |   7 +
 2 files changed, 266 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
new file mode 100644
index 000000000000..8bd78ef424ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
@@ -0,0 +1,259 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek, BayLibre
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8365-seninf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Sensor Interface 3.0
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+  - Julien Stephan <jstephan@baylibre.com>
+  - Andy Hsieh <andy.hsieh@mediatek.com>
+
+description:
+  The ISP3.0 SENINF is the CSI-2 and parallel camera sensor interface found in
+  multiple MediaTek SoCs. It can support up to three physical CSI-2 input ports,
+  configured in DPHY (2 or 4 data lanes) or CPHY depending on the SoC.
+  On the output side, SENINF can be connected either to CAMSV instance or
+  to the internal ISP. CAMSV is used to bypass the internal ISP processing
+  in order to connect either an external ISP, or a sensor (RAW, YUV).
+
+properties:
+  compatible:
+    const: mediatek,mt8365-seninf
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Seninf camsys clock
+      - description: Seninf top mux clock
+
+  clock-names:
+    items:
+      - const: camsys
+      - const: top_mux
+
+  phys:
+    minItems: 2
+    maxItems: 2
+    description:
+      phandle to the PHYs connected to CSI0/A, CSI1, CSI0B
+
+  phy-names:
+    description:
+      list of PHYs names
+    minItems: 2
+    maxItems: 2
+    items:
+      enum: [ csi0, csi1, csi0b]
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI0 or CSI0A port
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI1 port
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI2 port
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI0B port
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+              data-lanes:
+                minItems: 1
+                maxItems: 2
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: connection point for cam0
+
+      port@5:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: connection point for cam1
+
+      port@6:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: connection point for camsv0
+
+      port@7:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: connection point for camsv1
+
+      port@8:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: connection point for camsv2
+
+      port@9:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: connection point for camsv3
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+      - port@5
+      - port@6
+      - port@7
+      - port@8
+      - port@9
+
+required:
+  - compatible
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mediatek,mt8365-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mediatek,mt8365-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        csi@15040000 {
+            compatible = "mediatek,mt8365-seninf";
+            reg = <0 0x15040000 0 0x6000>;
+            interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&camsys CLK_CAM_SENIF>,
+                     <&topckgen CLK_TOP_SENIF_SEL>;
+            clock-names = "camsys", "top_mux";
+
+            power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+
+            phys = <&mipi_csi0 PHY_TYPE_DPHY>, <&mipi_csi1>;
+            phy-names = "csi0", "csi1";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    seninf_in1: endpoint {
+                        clock-lanes = <2>;
+                        data-lanes = <1 3 0 4>;
+                        remote-endpoint = <&isp1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                };
+
+                port@2 {
+                    reg = <2>;
+                };
+
+                port@3 {
+                    reg = <3>;
+                };
+
+                port@4 {
+                    reg = <4>;
+                    seninf_camsv1_endpoint: endpoint {
+                        remote-endpoint = <&camsv1_endpoint>;
+                    };
+                };
+
+                port@5 {
+                    reg = <5>;
+                    seninf_camsv2_endpoint: endpoint {
+                        remote-endpoint = <&camsv2_endpoint>;
+                    };
+                };
+
+                port@6 {
+                    reg = <6>;
+                };
+
+                port@7 {
+                    reg = <7>;
+                };
+
+                port@8 {
+                    reg = <8>;
+                };
+
+                port@9 {
+                    reg = <9>;
+                };
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index d6c90161c7bf..6bd7df1c3e08 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14158,6 +14158,13 @@ M:	Sean Wang <sean.wang@mediatek.com>
 S:	Maintained
 F:	drivers/char/hw_random/mtk-rng.c
 
+MEDIATEK ISP3.0 DRIVER
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+M:	Julien Stephan <jstephan@baylibre.com>
+M:	Andy Hsieh <andy.hsieh@mediatek.com>
+S:	Supported
+F:	Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
+
 MEDIATEK SMI DRIVER
 M:	Yong Wu <yong.wu@mediatek.com>
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)

-- 
2.45.1