devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Varshini Rajendran <varshini.rajendran@microchip.com>
To: <robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
	<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<claudiu.beznea@tuxon.dev>, <mturquette@baylibre.com>,
	<sboyd@kernel.org>, <tglx@linutronix.de>, <lee@kernel.org>,
	<sre@kernel.org>, <p.zabel@pengutronix.de>,
	<richard.genoud@bootlin.com>, <radu_nicolae.pirea@upb.ro>,
	<gregkh@linuxfoundation.org>, <jirislaby@kernel.org>,
	<linux@armlinux.org.uk>, <matthias.bgg@gmail.com>,
	<angelogioacchino.delregno@collabora.com>, <ychuang3@nuvoton.com>,
	<schung@nuvoton.com>, <mihai.sain@microchip.com>,
	<varshini.rajendran@microchip.com>, <andrei.simion@microchip.com>,
	<arnd@arndb.de>, <Jason@zx2c4.com>, <dharma.b@microchip.com>,
	<rdunlap@infradead.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	<linux-pm@vger.kernel.org>, <linux-spi@vger.kernel.org>,
	<linux-serial@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>
Subject: [PATCH v6 00/27] Add support for sam9x7 SoC family
Date: Mon, 29 Jul 2024 12:26:03 +0530	[thread overview]
Message-ID: <20240729065603.1986074-1-varshini.rajendran@microchip.com> (raw)

This patch series adds support for the new SoC family - sam9x7.
 - The device tree, configs and drivers are added
 - Clock driver for sam9x7 is added
 - Support for basic peripherals is added
 - Target board SAM9X75 Curiosity is added

 Changes in v6:
 --------------

 - Addressed all the review comments in the patches
 - Picked up all Acked-by and Reviewed-by tags
 - Reverted the IRQ patch to that of version 3 of the same series
 - All the specific changes are captured in the corresponding patches

 Changes in v5:
 --------------

 - Addressed all the review comments in the patches
 - Picked up all Acked-by and Reviewed-by tags
 - Dropped applied patches from the series
 - Addressed the ABI breakage reported in the IRQ patch
 - All the specific changes are captured in the corresponding patches

 Changes in v4:
 --------------

 - Addressed all the review comments in the patches
 - Picked up all Acked-by and Reviewed-by tags
 - Dropped applied patches from the series
 - Added pwm node and related dt binding documentation
 - Added support for exporting some clocks to DT
 - Dropped USB related patches and changes. See NOTE.
 - All the specific changes are captured in the corresponding patches

 NOTE: Owing to the discussion here
 https://lore.kernel.org/linux-devicetree/CAL_JsqJ9PrX6fj-EbffeJce09MXs=B7t+KS_kOinxaRx38=WxA@mail.gmail.com/
 the USB related changes are dropped from this series in order to enable
 us to work on the mentioned issues before adding new compatibles as
 said. The issues/warnings will be addressed in subsequent patches.
 After which the USB related support for sam9x7 SoCs will be added. Hope
 this works out fine.

 Changes in v3:
 --------------

 - Fixed the DT documentation errors pointed out in v2.
 - Dropped Acked-by tag in tcb DT doc patch as it had to be adapted
   according to sam9x7 correctly.
 - Picked by the previously missed tags.
 - Dropped this patch "dt-bindings: usb: generic-ehci: Document clock-names
   property" as the warning was not found while validating DT-schema for
   at91-sam9x75_curiosity.dtb.
 - Dropped redundant words in the commit message.
 - Fixed the CHECK_DTBS warnings validated against
   at91-sam9x75_curiosity.dtb.
 - Renamed dt nodes according to naming convention.
 - Dropped unwanted status property in dts.
 - Removed nodes that are not in use from the board dts.
 - Removed spi DT doc patch from the series as it was already applied
   and a fix patch was applied subsequently. Added a patch to remove the
   compatible to adapt sam9x7.
 - Added sam9x7 compatibles in usb dt documentation.


 Changes in v2:
 --------------

 - Added sam9x7 specific compatibles in DT with fallbacks
 - Documented all the newly added DT compatible strings
 - Added device tree for the target board sam9x75 curiosity and
   documented the same in the DT bindings documentation
 - Removed the dt nodes that are not supported at the moment
 - Removed the configs added by previous version that are not supported
   at the moment
 - Fixed all the corrections in the commit message
 - Changed all the instances of copyright year to 2023
 - Added sam9x7 flag in PIT64B configuration
 - Moved macro definitions to header file
 - Added another divider in mck characteristics in the pmc driver
 - Fixed the memory leak in the pmc driver
 - Dropped patches that are no longer needed
 - Picked up Acked-by and Reviewed-by tags


Hari Prasath (1):
  irqchip/atmel-aic5: Add support for sam9x7 aic

Varshini Rajendran (26):
  dt-bindings: atmel-sysreg: add sam9x7
  dt-bindings: mfd: syscon: add microchip's sam9x7 sfr
  dt-bindings: atmel-ssc: add microchip,sam9x7-ssc
  dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7.
  dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x7 compatible
  ARM: at91: pm: add support for sam9x7 SoC family
  ARM: at91: pm: add sam9x7 SoC init config
  ARM: at91: add support in SoC driver for new sam9x7
  dt-bindings: clocks: atmel,at91sam9x5-sckc: add sam9x7
  dt-bindings: clocks: atmel,at91rm9200-pmc: add sam9x7 clock controller
  clk: at91: clk-sam9x60-pll: re-factor to support individual core freq
    outputs
  clk: at91: sam9x7: add support for HW PLL freq dividers
  clk: at91: sama7g5: move mux table macros to header file
  dt-bindings: clock: at91: Allow PLLs to be exported and referenced in
    DT
  clk: at91: sam9x7: add sam9x7 pmc driver
  dt-bindings: interrupt-controller: Add support for sam9x7 aic
  power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7
  power: reset: at91-reset: add reset support for sam9x7 SoC
  power: reset: at91-reset: add sdhwc support for sam9x7 SoC
  dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
  dt-bindings: power: reset: atmel,sama5d2-shdwc: add sam9x7
  ARM: at91: Kconfig: add config flag for SAM9X7 SoC
  ARM: configs: at91: enable config flags for sam9x7 SoC family
  ARM: dts: at91: sam9x7: add device tree for SoC
  dt-bindings: arm: add sam9x75 curiosity board
  ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board

 .../devicetree/bindings/arm/atmel-at91.yaml   |    6 +
 .../devicetree/bindings/arm/atmel-sysregs.txt |    6 +-
 .../bindings/clock/atmel,at91rm9200-pmc.yaml  |    2 +
 .../bindings/clock/atmel,at91sam9x5-sckc.yaml |    4 +-
 .../interrupt-controller/atmel,aic.yaml       |    1 +
 .../devicetree/bindings/mfd/syscon.yaml       |  188 +--
 .../devicetree/bindings/misc/atmel-ssc.txt    |    1 +
 .../power/reset/atmel,sama5d2-shdwc.yaml      |    3 +
 .../reset/atmel,at91sam9260-reset.yaml        |    4 +
 .../bindings/serial/atmel,at91-usart.yaml     |    9 +-
 .../soc/microchip/atmel,at91rm9200-tcb.yaml   |   20 +-
 arch/arm/boot/dts/microchip/Makefile          |    3 +
 .../dts/microchip/at91-sam9x75_curiosity.dts  |  312 +++++
 arch/arm/boot/dts/microchip/sam9x7.dtsi       | 1226 +++++++++++++++++
 arch/arm/configs/at91_dt_defconfig            |    1 +
 arch/arm/mach-at91/Kconfig                    |   22 +-
 arch/arm/mach-at91/Makefile                   |    1 +
 arch/arm/mach-at91/generic.h                  |    2 +
 arch/arm/mach-at91/pm.c                       |   29 +
 arch/arm/mach-at91/sam9x7.c                   |   33 +
 drivers/clk/at91/Makefile                     |    1 +
 drivers/clk/at91/clk-sam9x60-pll.c            |   42 +-
 drivers/clk/at91/pmc.h                        |   18 +
 drivers/clk/at91/sam9x60.c                    |    7 +
 drivers/clk/at91/sam9x7.c                     |  946 +++++++++++++
 drivers/clk/at91/sama7g5.c                    |   42 +-
 drivers/irqchip/irq-atmel-aic5.c              |   10 +
 drivers/power/reset/Kconfig                   |    4 +-
 drivers/power/reset/at91-sama5d2_shdwc.c      |    1 +
 drivers/soc/atmel/soc.c                       |   23 +
 drivers/soc/atmel/soc.h                       |    9 +
 include/dt-bindings/clock/at91.h              |    4 +
 32 files changed, 2840 insertions(+), 140 deletions(-)
 create mode 100644 arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
 create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi
 create mode 100644 arch/arm/mach-at91/sam9x7.c
 create mode 100644 drivers/clk/at91/sam9x7.c

-- 
2.25.1


             reply	other threads:[~2024-07-29  6:56 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-29  6:56 Varshini Rajendran [this message]
2024-07-29  7:05 ` [PATCH v6 01/27] dt-bindings: atmel-sysreg: add sam9x7 Varshini Rajendran
2024-07-29  7:06 ` [PATCH v6 02/27] dt-bindings: mfd: syscon: add microchip's sam9x7 sfr Varshini Rajendran
2024-07-30 16:50   ` Rob Herring
2024-07-29  7:06 ` [PATCH v6 03/27] dt-bindings: atmel-ssc: add microchip,sam9x7-ssc Varshini Rajendran
2024-07-29  7:06 ` [PATCH v6 04/27] dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7 Varshini Rajendran
2024-07-29  7:06 ` [PATCH v6 05/27] dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x7 compatible Varshini Rajendran
2024-07-30 19:04   ` Rob Herring
2024-07-29  7:07 ` [PATCH v6 09/27] dt-bindings: clocks: atmel,at91sam9x5-sckc: add sam9x7 Varshini Rajendran
2024-07-29  7:07 ` [PATCH v6 10/27] dt-bindings: clocks: atmel,at91rm9200-pmc: add sam9x7 clock controller Varshini Rajendran
2024-07-29  7:08 ` [PATCH v6 14/27] dt-bindings: clock: at91: Allow PLLs to be exported and referenced in DT Varshini Rajendran
2024-07-29  7:08 ` [PATCH v6 16/27] dt-bindings: interrupt-controller: Add support for sam9x7 aic Varshini Rajendran
2024-07-29 16:24   ` Rob Herring
2024-07-29  7:09 ` [PATCH v6 21/27] dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 Varshini Rajendran
2024-07-29  7:09 ` [PATCH v6 22/27] dt-bindings: power: reset: atmel,sama5d2-shdwc: " Varshini Rajendran
2024-07-29  7:09 ` [PATCH v6 25/27] ARM: dts: at91: sam9x7: add device tree for SoC Varshini Rajendran
2024-07-31  8:30   ` Krzysztof Kozlowski
2024-08-27  9:50     ` Varshini.Rajendran
2024-08-27 12:48       ` Krzysztof Kozlowski
2024-08-28  8:25         ` Varshini.Rajendran
2024-08-28 11:49           ` Krzysztof Kozlowski
2024-09-02  6:34             ` Varshini.Rajendran
2024-07-29  7:09 ` [PATCH v6 26/27] dt-bindings: arm: add sam9x75 curiosity board Varshini Rajendran
2024-07-29  7:10 ` [PATCH v6 27/27] ARM: dts: microchip: sam9x75_curiosity: " Varshini Rajendran
2024-07-29  8:17 ` [PATCH v6 00/27] Add support for sam9x7 SoC family Andrei.Simion
2024-07-29  8:57   ` Varshini.Rajendran
2024-07-29 18:52 ` Rob Herring (Arm)
2024-08-09  6:24 ` claudiu beznea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240729065603.1986074-1-varshini.rajendran@microchip.com \
    --to=varshini.rajendran@microchip.com \
    --cc=Jason@zx2c4.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andrei.simion@microchip.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=arnd@arndb.de \
    --cc=claudiu.beznea@tuxon.dev \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dharma.b@microchip.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jirislaby@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=matthias.bgg@gmail.com \
    --cc=mihai.sain@microchip.com \
    --cc=mturquette@baylibre.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=p.zabel@pengutronix.de \
    --cc=radu_nicolae.pirea@upb.ro \
    --cc=rdunlap@infradead.org \
    --cc=richard.genoud@bootlin.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=schung@nuvoton.com \
    --cc=sre@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=ychuang3@nuvoton.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).