[PATCH can-next v2 09/20] can: rockchip_canfd: rkcanfd_handle_rx_int_one(): implement workaround for erratum 5: check for empty FIFO

[Marc Kleine-Budde <mkl@pengutronix.de>]

The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:

| Erratum 5: Counters related to the TXFIFO and RXFIFO exhibit
| abnormal counting behavior.
|
| Due to a bug in the cross-asynchronous logic of the enable signals
| for rx_fifo_cnt and txe_fifo_frame_cnt counters, the counts of these
| two counters become inaccurate. This issue has resulted in the
| inability to use the TXFIFO and RXFIFO functions.

The errata sheet mentioned above states that only the rk3568v2 is
affected by this erratum, but tests with the rk3568v2 and rk3568v3
show that the RX_FIFO_CNT is sometimes too high. This leads to CAN
frames being read from the FIFO, which is then already empty.

Further tests on the rk3568v2 and rk3568v3 show that in this
situation (i.e. empty FIFO) all elements of the FIFO
header (frameinfo, id, ts) contain the same data.

On the rk3568v2 and rk3568v3, this problem only occurs extremely
rarely with the standard clock of 300 MHz, but almost immediately at
80 MHz.

To workaround this problem, check for empty FIFO with
rkcanfd_fifo_header_empty() in rkcanfd_handle_rx_int_one() and exit
early.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/rockchip/rockchip_canfd-rx.c | 14 ++++++++++++++
 drivers/net/can/rockchip/rockchip_canfd.h    | 22 ++++++++++++++++++++++
 2 files changed, 36 insertions(+)

diff --git a/drivers/net/can/rockchip/rockchip_canfd-rx.c b/drivers/net/can/rockchip/rockchip_canfd-rx.c
index 5398aff0d180..609282359bca 100644
--- a/drivers/net/can/rockchip/rockchip_canfd-rx.c
+++ b/drivers/net/can/rockchip/rockchip_canfd-rx.c
@@ -47,6 +47,16 @@ rkcanfd_fifo_header_to_cfd_header(const struct rkcanfd_priv *priv,
 	return len + cfd->len;
 }
 
+static inline bool
+rkcanfd_fifo_header_empty(const struct rkcanfd_fifo_header *header)
+{
+	/* Erratum 5: If the FIFO is empty, we read the same value for
+	 * all elements.
+	 */
+	return header->frameinfo == header->id &&
+		header->frameinfo == header->ts;
+}
+
 static int rkcanfd_handle_rx_int_one(struct rkcanfd_priv *priv)
 {
 	struct net_device_stats *stats = &priv->ndev->stats;
@@ -63,6 +73,10 @@ static int rkcanfd_handle_rx_int_one(struct rkcanfd_priv *priv)
 	rkcanfd_read_rep(priv, RKCANFD_REG_RX_FIFO_RDATA,
 			 cfd->data, sizeof(cfd->data));
 
+	/* Erratum 5: Counters for TXEFIFO and RXFIFO may be wrong */
+	if (rkcanfd_fifo_header_empty(header))
+		return 0;
+
 	len = rkcanfd_fifo_header_to_cfd_header(priv, header, cfd);
 
 	/* Drop any received CAN-FD frames if CAN-FD mode is not
diff --git a/drivers/net/can/rockchip/rockchip_canfd.h b/drivers/net/can/rockchip/rockchip_canfd.h
index 3dafb5e68dc5..c775e75a2740 100644
--- a/drivers/net/can/rockchip/rockchip_canfd.h
+++ b/drivers/net/can/rockchip/rockchip_canfd.h
@@ -315,6 +315,28 @@
 
 /* Erratum 5: Counters related to the TXFIFO and RXFIFO exhibit
  * abnormal counting behavior.
+ *
+ * The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
+ * states that only the rk3568v2 is affected by this erratum, but
+ * tests with the rk3568v2 and rk3568v3 show that the RX_FIFO_CNT is
+ * sometimes too high. This leads to CAN frames being read from the
+ * FIFO, which is then already empty.
+ *
+ * Further tests on the rk3568v2 and rk3568v3 show that in this
+ * situation (i.e. empty FIFO) all elements of the FIFO header
+ * (frameinfo, id, ts) contain the same data.
+ *
+ * On the rk3568v2 and rk3568v3, this problem only occurs extremely
+ * rarely with the standard clock of 300 MHz, but almost immediately
+ * at 80 MHz.
+ *
+ * To workaround this problem, check for empty FIFO with
+ * rkcanfd_fifo_header_empty() in rkcanfd_handle_rx_int_one() and exit
+ * early.
+ *
+ * To reproduce:
+ * assigned-clocks = <&cru CLK_CANx>;
+ * assigned-clock-rates = <80000000>;
  */
 #define RKCANFD_QUIRK_RK3568_ERRATUM_5 BIT(4)
 

-- 
2.43.0