From: Drew Fustini <drew@pdp7.com>
To: Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Thomas Bonnefille <thomas.bonnefille@bootlin.com>,
Kanak Shilledar <kanakshilledar@gmail.com>,
Jisheng Zhang <jszhang@kernel.org>, Guo Ren <guoren@kernel.org>,
Fu Wei <wefu@redhat.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Drew Fustini <drew@pdp7.com>,
Drew Fustini <dfustini@tenstorrent.com>
Subject: [PATCH 4/6] riscv: dts: thead: update TH1520 dma and timer nodes to use clock controller
Date: Thu, 01 Aug 2024 11:38:08 -0700 [thread overview]
Message-ID: <20240801-th1520-clk-dts-v1-4-71077a0614b8@pdp7.com> (raw)
In-Reply-To: <20240801-th1520-clk-dts-v1-0-71077a0614b8@pdp7.com>
From: Drew Fustini <dfustini@tenstorrent.com>
Change the dma-controller and timer nodes to use the APB clock provided
by the AP_SUBSYS clock controller.
Remove apb_clk reference from BeagleV Ahead and LPI4a dts.
Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
---
arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 4 ----
.../boot/dts/thead/th1520-lichee-module-4a.dtsi | 4 ----
arch/riscv/boot/dts/thead/th1520.dtsi | 24 ++++++++--------------
3 files changed, 9 insertions(+), 23 deletions(-)
diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index 5169a718f79c..425f07d73b32 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -45,10 +45,6 @@ &osc_32k {
clock-frequency = <32768>;
};
-&apb_clk {
- clock-frequency = <62500000>;
-};
-
&spi_clk {
clock-frequency = <396000000>;
};
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
index be982a3ac18c..077dbbe4abb6 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -25,10 +25,6 @@ &osc_32k {
clock-frequency = <32768>;
};
-&apb_clk {
- clock-frequency = <62500000>;
-};
-
&spi_clk {
clock-frequency = <396000000>;
};
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index f3b2f8236096..6ea5cabbcf60 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -216,12 +216,6 @@ osc_32k: 32k-oscillator {
#clock-cells = <0>;
};
- apb_clk: apb-clk-clock {
- compatible = "fixed-clock";
- clock-output-names = "apb_clk";
- #clock-cells = <0>;
- };
-
spi_clk: spi-clock {
compatible = "fixed-clock";
clock-output-names = "spi_clk";
@@ -422,7 +416,7 @@ dmac0: dma-controller@ffefc00000 {
compatible = "snps,axi-dma-1.01a";
reg = <0xff 0xefc00000 0x0 0x1000>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb_clk>, <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>, <&clk CLK_PERI_APB_PCLK>;
clock-names = "core-clk", "cfgr-clk";
#dma-cells = <1>;
dma-channels = <4>;
@@ -437,7 +431,7 @@ dmac0: dma-controller@ffefc00000 {
timer0: timer@ffefc32000 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32000 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -446,7 +440,7 @@ timer0: timer@ffefc32000 {
timer1: timer@ffefc32014 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32014 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -455,7 +449,7 @@ timer1: timer@ffefc32014 {
timer2: timer@ffefc32028 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32028 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -464,7 +458,7 @@ timer2: timer@ffefc32028 {
timer3: timer@ffefc3203c {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc3203c 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -495,7 +489,7 @@ uart5: serial@fff7f0c000 {
timer4: timer@ffffc33000 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc33000 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -504,7 +498,7 @@ timer4: timer@ffffc33000 {
timer5: timer@ffffc33014 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc33014 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -513,7 +507,7 @@ timer5: timer@ffffc33014 {
timer6: timer@ffffc33028 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc33028 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -522,7 +516,7 @@ timer6: timer@ffffc33028 {
timer7: timer@ffffc3303c {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc3303c 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
--
2.34.1
next prev parent reply other threads:[~2024-08-01 18:38 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-01 18:38 [PATCH 0/6] riscv: dts: thead: Enable TH1520 AP_SUBSYS clock controller Drew Fustini
2024-08-01 18:38 ` [PATCH 1/6] riscv: dts: thead: Add " Drew Fustini
2024-08-01 18:38 ` [PATCH 2/6] riscv: dts: thead: change TH1520 uart nodes to use " Drew Fustini
2024-08-01 18:38 ` [PATCH 3/6] riscv: dts: thead: change TH1520 mmc " Drew Fustini
2024-08-01 18:38 ` Drew Fustini [this message]
2024-08-01 18:38 ` [PATCH 5/6] riscv: dts: thead: add clock to TH1520 gpio nodes Drew Fustini
2024-08-01 18:38 ` [PATCH 6/6] riscv: dts: thead: change TH1520 SPI node to use clock controller Drew Fustini
2024-08-08 18:22 ` [PATCH 0/6] riscv: dts: thead: Enable TH1520 AP_SUBSYS " Drew Fustini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240801-th1520-clk-dts-v1-4-71077a0614b8@pdp7.com \
--to=drew@pdp7.com \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dfustini@tenstorrent.com \
--cc=emil.renner.berthing@canonical.com \
--cc=guoren@kernel.org \
--cc=jszhang@kernel.org \
--cc=kanakshilledar@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
--cc=thomas.bonnefille@bootlin.com \
--cc=wefu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).