From: Christian Marangi <ansuelsmth@gmail.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Joern Engel <joern@lazybastard.org>,
Keith Busch <kbusch@kernel.org>, Jens Axboe <axboe@kernel.dk>,
Christoph Hellwig <hch@lst.de>, Sagi Grimberg <sagi@grimberg.me>,
Christian Marangi <ansuelsmth@gmail.com>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
linux-nvme@lists.infradead.org
Subject: [PATCH v2 1/6] dt-bindings: nvme: Document nvme-card compatible
Date: Sun, 4 Aug 2024 19:44:05 +0200 [thread overview]
Message-ID: <20240804174414.18171-2-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20240804174414.18171-1-ansuelsmth@gmail.com>
Document new nvme-card compatible to permit defining fixed-partition in
DT by the use of the block2mtd module to use block devices as MTD.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
.../devicetree/bindings/nvme/nvme-card.yaml | 78 +++++++++++++++++++
1 file changed, 78 insertions(+)
create mode 100644 Documentation/devicetree/bindings/nvme/nvme-card.yaml
diff --git a/Documentation/devicetree/bindings/nvme/nvme-card.yaml b/Documentation/devicetree/bindings/nvme/nvme-card.yaml
new file mode 100644
index 000000000000..20e9a877fac4
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvme/nvme-card.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvme/nvme-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVME Card
+
+maintainers:
+ - Christian Marangi <ansuelsmth@gmail.com>
+
+description: |
+ This documents describes the devicetree bindings for a NVME controller
+ child node describing a nvme-card.
+
+properties:
+ compatible:
+ const: nvme-card
+
+ partitions:
+ $ref: /schemas/mtd/partitions/partitions.yaml
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pcie {
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvme@1,0 {
+ compatible = "pci144d,a809";
+
+ reg = <0x00010000 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ card {
+ compatible = "nvme-card";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootloader@0 {
+ label = "bootloader";
+ reg = <0x00000000 0x00080000>;
+ };
+
+ tclinux@80000 {
+ label = "tclinux";
+ reg = <0x00080000 0x02800000>;
+ };
+
+ tclinux_slave@2880000 {
+ label = "tclinux_slave";
+ reg = <0x02880000 0x02800000>;
+ };
+
+ rootfs_data@5080000 {
+ label = "rootfs_data";
+ reg = <0x5080000 0x00800000>;
+ };
+ };
+ };
+ };
+ };
+ };
--
2.45.2
next prev parent reply other threads:[~2024-08-04 17:44 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-04 17:44 [PATCH v2 0/6] mtd: improve block2mtd + airoha parser Christian Marangi
2024-08-04 17:44 ` Christian Marangi [this message]
2024-08-04 17:44 ` [PATCH v2 2/6] nvme: assign of_node to nvme device Christian Marangi
2024-08-04 17:44 ` [PATCH v2 3/6] dt-bindings: mmc: add property for partitions node in mmc-card node Christian Marangi
2024-08-04 17:44 ` [PATCH v2 4/6] block2mtd: attach device OF node to MTD device Christian Marangi
2024-08-04 17:44 ` [PATCH v2 5/6] dt-bindings: mtd: Add Documentation for Airoha fixed-partitions Christian Marangi
2024-08-04 17:44 ` [PATCH v2 6/6] mtd: parser: add support for Airoha parser Christian Marangi
2024-08-04 22:41 ` kernel test robot
2024-08-04 22:52 ` kernel test robot
2024-08-05 2:54 ` Christian Marangi
2024-08-06 9:23 ` Philip Li
2024-08-06 11:32 ` Christian Marangi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240804174414.18171-2-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=axboe@kernel.dk \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=hch@lst.de \
--cc=joern@lazybastard.org \
--cc=kbusch@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-nvme@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh@kernel.org \
--cc=sagi@grimberg.me \
--cc=tsbogend@alpha.franken.de \
--cc=ulf.hansson@linaro.org \
--cc=vigneshr@ti.com \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).