Re: [PATCH v3 1/7] dt-bindings: connector: add GE SUNH hotplug addon connector

[Luca Ceresoli <luca.ceresoli@bootlin.com>]

Hello,

On Fri, 09 Aug 2024 17:34:49 +0200
Luca Ceresoli <luca.ceresoli@bootlin.com> wrote:

> Add bindings for the GE SUNH add-on connector. This is a physical,
> hot-pluggable connector that allows to attach and detach at runtime an
> add-on adding peripherals on non-discoverable busses.
> 
> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

...

> +examples:
> +  # This is the description of the connector as it should appear in the
> +  # main DTS describing the "main" board up to the connector.

The comment from now on has outdated content referring to v2 and which I
forgot to remove before sending v3:

>      This is
> +  # supposed to be used together with the overlays in the two following
> +  # examples. The addon_connector and hotplug_conn_dsi_out labels are
> +  # referenced by the overlays in those examples.

Fixed locally.

> +  - |
> +    / {
> +        #include <dt-bindings/gpio/gpio.h>

I also removed the root node which is not needed and cause bot warnings,
and with that done the #include went back to a correct position.

The above are queued for v4.

Luca

-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com