[PATCH v2 08/12] arm64: dts: fsl-lx2160a-tqmlx2160a: change "vcc" to "vdd" for hub*

[Frank Li <Frank.Li@nxp.com>]

According to binging doc usb/ti,usb8041.yaml and in
drivers/usb/misc/onboard_usb_dev.h

ti_tusb8041_data = { .supply_names = { "vdd" },};

It should vdd-supply instead vcc-supply.

Fixes: 04b77e0124ef ("arm64: dts: freescale: add fsl-lx2160a-mblx2160a board")
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
index da0f58e26b9aa..f6a4f8d543015 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
@@ -320,7 +320,7 @@ hub_2_0: hub@1 {
 		reg = <1>;
 		peer-hub = <&hub_3_0>;
 		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&reg_vcc3v3>;
+		vdd-supply = <&reg_vcc3v3>;
 	};
 
 	hub_3_0: hub@2 {
@@ -328,7 +328,7 @@ hub_3_0: hub@2 {
 		reg = <2>;
 		peer-hub = <&hub_2_0>;
 		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&reg_vcc3v3>;
+		vdd-supply = <&reg_vcc3v3>;
 	};
 };
 

-- 
2.34.1